Re: who do I report this to?

Aryeh M. Friedman wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Who do I report the following issue to (it falls into at least 3 camps)?
> 
> If I am downloading a torrent in deluge 0.5.6.2_1 *AND* am logged into
> gmail (*WITH* a chat open) my network connection looses about 90% of
> it's capacity (for all applications), re(4) with the following:
> 

I'm not saying it is NOT a software problem, but at least one connectivity 
provider (COMCAST) has been caught mucking about with the link when things they 
were not fond of were being transferred.

Might be of value to see if this can be replicated on some other upstream than 
whatever one serves you.

tcpdump may also show you a bit more about what is going on..

Bill


> rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
> rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> 
> After some experimenting this problem *only* occurs under the above
> conditions.
> 
> Addtional info:
> 
> gnome 2.20.1
> nv driver (latest)
> Xorg 7.3
> 
> FreeBSD monster 8.0-CURRENT FreeBSD 8.0-CURRENT #1: Thu Nov 15
> 19:17:50 EST 2007    
> aryeh_at_monster:/usr/obj/FreeBSD/FreeBSD-current/src/sys/MONSTER  amd64
> 
> Buildworld done at the same time as buildkernelCopyright (c) 1992-2007
> The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.0-CURRENT #1: Thu Nov 15 19:17:50 EST 2007
>     aryeh_at_monster:/usr/obj/FreeBSD/FreeBSD-current/src/sys/MONSTER
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Core(TM)2 Duo CPU     E6850  _at_ 3.00GHz (3005.68-MHz
> K8-class CPU)
>   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
>  
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  
> Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
>   AMD Features=0x20000800<SYSCALL,LM>
>   AMD Features2=0x1<LAHF>
>   Cores per package: 2
> usable memory = 4281409536 (4083 MB)
> avail memory  = 4127895552 (3936 MB)
> ACPI APIC Table: <052107 APIC1013>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
> acpi0: <052107 RSDT1013> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, dff00000 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  86,
> should be 79 [20070320]
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 92a092a0600092a
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 92a092a0600092a
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> uhci0: <UHCI (generic) USB controller> port 0xcc00-0xcc1f irq 16 at
> device 26.0 on pci0
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 21 at
> device 26.1 on pci0
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcdffc00-0xfcdfffff
> irq 18 at device 26.7 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb2: EHCI version 1.0
> usb2: companion controllers, 2 ports each: usb0 usb1
> usb2: <EHCI (generic) USB 2.0 controller> on ehci0
> usb2: USB revision 2.0
> uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
> uhub2: 4 ports with 4 removable, self powered
> pcm0: <Intel 82801I High Definition Audio Controller> mem
> 0xfcdf8000-0xfcdfbfff irq 22 at device 27.0 on pci0
> pcm0: [ITHREAD]
> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
> pci3: <ACPI PCI bus> on pcib3
> atapci0: <Marvell 88SX6121 SATA300 controller> port
> 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f
> mem 0xfceffc00-0xfcefffff irq 16 at device 0.0 on pci3
> atapci0: [ITHREAD]
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
> pci4: <ACPI PCI bus> on pcib4
> re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem
> 0xfcfff000-0xfcffffff irq 17 at device 0.0 on pci4
> re0: Using 2 MSI messages
> miibus0: <MII bus> on re0
> rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
> rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> re0: Ethernet address: 00:19:db:b5:f8:0f
> re0: [FILTER]
> re0: [FILTER]
> uhci2: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 23 at
> device 29.0 on pci0
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb3: <UHCI (generic) USB controller> on uhci2
> usb3: USB revision 1.0
> uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
> uhub3: 2 ports with 2 removable, self powered
> uhci3: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 19 at
> device 29.1 on pci0
> uhci3: [GIANT-LOCKED]
> uhci3: [ITHREAD]
> usb4: <UHCI (generic) USB controller> on uhci3
> usb4: USB revision 1.0
> uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
> uhub4: 2 ports with 2 removable, self powered
> uhci4: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 18 at
> device 29.2 on pci0
> uhci4: [GIANT-LOCKED]
> uhci4: [ITHREAD]
> usb5: <UHCI (generic) USB controller> on uhci4
> usb5: USB revision 1.0
> uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
> uhub5: 2 ports with 2 removable, self powered
> uhci5: <UHCI (generic) USB controller> port 0xc080-0xc09f irq 16 at
> device 29.3 on pci0
> uhci5: [GIANT-LOCKED]
> uhci5: [ITHREAD]
> usb6: <UHCI (generic) USB controller> on uhci5
> usb6: USB revision 1.0
> uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
> uhub6: 2 ports with 2 removable, self powered
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfcdff800-0xfcdffbff
> irq 23 at device 29.7 on pci0
> ehci1: [GIANT-LOCKED]
> ehci1: [ITHREAD]
> usb7: EHCI version 1.0
> usb7: companion controllers, 2 ports each: usb3 usb4 usb5 usb6
> usb7: <EHCI (generic) USB 2.0 controller> on ehci1
> usb7: USB revision 2.0
> uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
> uhub7: 8 ports with 8 removable, self powered
> pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> vgapci0: <VGA-compatible display> mem
> 0xfd000000-0xfdffffff,0xf0000000-0xf7ffffff irq 17 at device 1.0 on pci5
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <Intel ICH9 SATA300 controller> port
> 0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f,0xb400-0xb40f
> irq 19 at device 31.2 on pci0
> atapci1: [ITHREAD]
> ata3: <ATA channel 0> on atapci1
> ata3: [ITHREAD]
> ata4: <ATA channel 1> on atapci1
> ata4: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> atapci2: <Intel ICH9 SATA300 controller> port
> 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
> irq 19 at device 31.5 on pci0
> atapci2: [ITHREAD]
> ata5: <ATA channel 0> on atapci2
> ata5: [ITHREAD]
> ata6: <ATA channel 1> on atapci2
> ata6: [ITHREAD]
> acpi_button0: <Power Button> on acpi0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
> on acpi0
> sio0: type 16550A
> sio0: [FILTER]
> fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq
> 2 on acpi0
> fdc0: [FILTER]
> ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ppc0: [GIANT-LOCKED]
> ppc0: [ITHREAD]
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ums0: <Microsoft Comfort Optical Mouse 1000, class 0/0, rev 2.00/1.21,
> addr 2> on uhub0
> ums0: 3 buttons and Z dir.
> fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
> Timecounters tick every 1.000 msec
> ad4: 194481MB <Maxtor 6Y200P0 YAR41BW0> at ata2-master UDMA133
> GEOM_LABEL: Label for provider ad4 is ufs/intad5: 238475MB <WDC
> WD2500JB-22REA0 20.00K20> at ata2-slave UDMA100
> disk2.
> ad6: 476940MB <Seagate ST3500630AS 3.AAE> at ata3-master SATA300
> acd0: DVDR <PLEXTOR DVDR PX-755A/1.08> at ata4-master SATA150
> pcm0: <HDA Codec: Realtek ALC888>
> pcm0: <HDA Driver Revision: 20071020_0048>
> SMP: AP CPU #1 Launched!
> 
> - --
> Aryeh M. Friedman
> Developer, not business, friendly
> http://www.flosoft-systems.com
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.4 (FreeBSD)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
> 
> iD8DBQFHQoiuJ9+1V27SttsRAlLXAJwI+OPgLH/0G4MR6gzB/7Dw+flhGACdEaBB
> zWErhfuW3gBIn75f+t3ao78=
> =ImbR
> -----END PGP SIGNATURE-----
> 
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
>