Hi y'all, Firstly, sorry if this isn't entirely the correct place to post this, for starters I'm not sure whether this problem is limited to -CURRENT and / or 7.0 or not. Tried to have a look at fixing it myself, but I'm not l33t enough! :-) On my Compaq Presario B3820 (PV142PA#ABG) laptop, I override the hw.acpi.thermal.tz0._PSV value because the default is the temperature at which the CPU is halted by the hardware until the temperature settles down. Since this gets triggered fairly often and is pretty annoying, I lower the trigger temperature level and have powerd(8) work passive-cooling-shaped magic. However, disconnecting or reconnecting AC power resets the value to the BIOS provided level. Would anyone be able to offer assistance with this? It's not too big a deal, I just have to remember to set the appropriate value again if the power state changes. uname -a: ____ FreeBSD presario.shmon.net 7.0-BETA3 FreeBSD 7.0-BETA3 #0: Mon Nov 19 23:16:36 EST 2007 nick_at_presario.shmon.net:/usr/obj/usr/src/sys/PRESARIO i386 ____ dmesg: ____ Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA3 #0: Mon Nov 19 23:16:36 EST 2007 nick_at_presario.shmon.net:/usr/obj/usr/src/sys/PRESARIO Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.70GHz (1694.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6 Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> real memory = 536281088 (511 MB) avail memory = 514666496 (490 MB) kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <PTLTD CooperSp> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci_link0: BIOS IRQ 10 for 0.29.INTA is invalid pci_link3: BIOS IRQ 3 for 0.29.INTB is invalid pci_link2: BIOS IRQ 11 for 0.29.INTC is invalid pci_link1: BIOS IRQ 5 for 0.31.INTB is invalid pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82855 host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci_link0: BIOS IRQ 10 for 1.0.INTA is invalid pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd8000000-0xdfffffff,0xd0100000-0xd010ffff irq 9 at device 0.0 on pci1 acpi_video0: <ACPI video extension> on vgapci0 drm0: <ATI Radeon RV350 Mobility 9600 M10 NP> on vgapci0 info: [drm] AGP at 0xe0000000 256MB info: [drm] Initialized radeon 1.25.0 20060524 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 9 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xd0000000-0xd00003ff irq 7 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci_link2: BIOS IRQ 11 for 2.7.INTC is invalid pci_link1: BIOS IRQ 5 for 2.8.INTA is invalid pci_link2: BIOS IRQ 11 for 2.9.INTA is invalid pci2: <ACPI PCI bus> on pcib2 cbb0: <RF5C476 PCI-CardBus Bridge> at device 7.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] cbb1: <RF5C476 PCI-CardBus Bridge> at device 7.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [ITHREAD] fwohci0: <Ricoh R5C552> mem 0xd0201000-0xd02017ff irq 9 at device 7.2 on pci2 fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 10:cf:fd:00:00:13:93:66 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode rl0: <RealTek 8139 10/100BaseTX> port 0x4000-0x40ff mem 0xd0201800-0xd02018ff irq 9 at device 8.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:13:21:10:b0:77 rl0: [ITHREAD] iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0200000-0xd0200fff irq 9 at device 9.0 on pci2 iwi0: Ethernet address: 00:0e:35:d6:8b:3f iwi0: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xd0000c00-0xd0000dff,0xd0000800-0xd00008ff irq 9 at device 31.5 on pci0 pcm0: [ITHREAD] pcm0: <Analog Devices AD1981B AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz_attach() called atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Synaptics Touchpad, device ID 0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xdf000-0xdffff,0xe0000-0xe3fff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: <Logitech Logitech USB Keyboard, class 0/0, rev 1.10/15.00, addr 2> on uhub1 kbd2 at ukbd0 uhid0: <Logitech Logitech USB Keyboard, class 0/0, rev 1.10/15.00, addr 2> on uhub1 ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/21.00, addr 3> on uhub1 ums0: 8 buttons and Z dir. Timecounter "TSC" frequency 1694512240 Hz quality 800 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging limited to 1000 packets/entry by default firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ad0: 57231MB <HTS548060M9AT00 MGBOA53A> at ata0-master UDMA100 cpu0: Cx states changed GEOM_LABEL: Label for provider ad0s2 is msdosfs/Corporation. acd0: DVDR <HL-DT-ST DVD-RW GWA-4080N/0G03> at ata1-master UDMA33 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 cd0 at ata1 bus 0 target 0 lun 0 cd0: <HL-DT-ST DVD-RW GWA-4080N 0G03> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad0s1a netsmb_dev: loaded ____ -- Nick Withers email: nick_at_nickwithers.com Web: http://www.nickwithers.com Mobile: +61 414 397 446Received on Tue Nov 20 2007 - 04:41:54 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:22 UTC