Hi, On Tue, Oct 09, 2007 at 09:45:56AM -0700, LI Xin wrote: > > ... > > Today I received some em0 watchdog timeouts on my fresh 7.0-CURRENT > > machine. At first I had only some short ssh hangs but now it seems my > > server is completely offline. I will not have local access to my > > computer until this night but I will ask in advance what I can do for > > you to debug and solve this problem. Thanks a lot for your reply. I have to correct my report. The machine had these em0 watchdog timeouts, but the 'offline problem' was caused by a craftsman, a drill machine and my cable to the internet... no comment, please :-) Nevertheless, I still have these timeouts and resets on em0. > > What information shall I provide? dmesg? Kernel configuration? > I think the following information would be helpful: > > - pciconf -lv > - /var/run/dmesg.boot Here you go: --- dmesg.boot ----- Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #0: Mon Oct 8 23:25:08 CEST 2007 hoschi_at_marathon.geonosis.homeunix.org:/usr/obj/usr/src/sys/MARATHON Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2391.15-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 1064767488 (1015 MB) avail memory = 1032761344 (984 MB) kbd1 at kbdmux0 acpi0: <DELL GX260 > on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, f00000 (3) failed acpi0: reservation of 1000000, 3e771000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem 0xf0000000-0xf7ffffff,0xff680000-0xff6fffff irq 9 at device 2.0 on pci0 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xff80-0xff9f irq 9 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xff60-0xff7f irq 11 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xff40-0xff5f irq 10 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xffa00800-0xffa00bff irq 3 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered umass0: <Cypress Semiconductor USB2.0 Storage Device, class 0/0, rev 2.00/0.01, addr 2> on uhub3 umass1: <USB DISK Pro, class 0/0, rev 2.00/30.00, addr 3> on uhub3 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 0xecc0-0xecff mem 0xff8e0000-0xff8fffff irq 10 at device 12.0 on pci1 em0: Ethernet address: 00:0b:db:3d:85:d3 em0: [FILTER] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcb7ff,0xcb800-0xcbfff,0xe0000-0xe17ff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled Timecounter "TSC" frequency 2391146728 Hz quality 800 Timecounters tick every 1.000 msec ad0: 76351MB <SAMSUNG SP0812N TK100-30> at ata0-master UDMA100 acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4240N/D110> at ata1-master UDMA33 --- pciconf -lv ------- hostb0_at_pci0:0:0:0: class=0x060000 card=0x01261028 chip=0x25608086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82845G/GL/GV/GE/PE DRAM Controller / Host-Hub I/F Bridge' class = bridge subclass = HOST-PCI vgapci0_at_pci0:0:2:0: class=0x030000 card=0x01261028 chip=0x25628086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82845G/GL/GV/GE/PE Integrated Graphics Device' class = display subclass = VGA uhci0_at_pci0:0:29:0: class=0x0c0300 card=0x01261028 chip=0x24c28086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller' class = serial bus subclass = USB uhci1_at_pci0:0:29:1: class=0x0c0300 card=0x01261028 chip=0x24c48086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller' class = serial bus subclass = USB uhci2_at_pci0:0:29:2: class=0x0c0300 card=0x01261028 chip=0x24c78086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller' class = serial bus subclass = USB ehci0_at_pci0:0:29:7: class=0x0c0320 card=0x01261028 chip=0x24cd8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI Controller' class = serial bus subclass = USB pcib1_at_pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x81 hdr=0x01 vendor = 'Intel Corporation' device = '82801BA/CA/DB/DBL/EB/ER/FB/GB/HB (ICH2/3/4/4/5/5/6/7/8), 63xxESB Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0_at_pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge' class = bridge subclass = PCI-ISA atapci0_at_pci0:0:31:1: class=0x01018a card=0x01261028 chip=0x24cb8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL (ICH4/ICH4-L) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA none0_at_pci0:0:31:3: class=0x0c0500 card=0x01261028 chip=0x24c38086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller' class = serial bus subclass = SMBus none1_at_pci0:0:31:5: class=0x040100 card=0x01261028 chip=0x24c58086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = 'intel 82801DB(-M) - AC'97 Audio Controller [B-0] SoundMAX Integrated Digital Controller' class = multimedia subclass = audio em0_at_pci0:1:12:0: class=0x020000 card=0x002e1028 chip=0x100e8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82540EM Gigabit Ethernet Controller' class = network subclass = ethernet > Perhaps kernel configuration is not quite useful at the moment, though. > Thanks for reporting the problem. Thanks a lot for your help. Bye Ollie -- Oliver PETER, email: hoschi_at_mouhaha.de, ICQ# 113969174 "Worker bees can leave. Even drones can fly away. The Queen is their slave."
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:19 UTC