Hi Phillip Neumann, Could you give us your main board model, Areca will try to research which problem cause it? I have new patch file for Areca new RAID adapter support, but I do not think it is useful on your case. I had ran Areca RAID controller Arc1120 and Arc1200(new adapter type) on INTEL 5000 serial main board for a week. The detail specification about your system is needed for me to touch it. Best Regards Erich Chen ----- Original Message ----- From: "Phillip Neumann" <pneumann_at_gmail.com> To: <freebsd-current_at_freebsd.org>; <scottl_at_samsco.org>; <erich_at_areca.com.tw>; <richardtector_at_thekeelecentre.com> Sent: Monday, October 15, 2007 8:18 AM Subject: Areca 1210 makes FreeBSD not boot > Dear FreeBSD, > > Im trying to use my areca mashine (amd64/X2) with FreeBSD 7, and have a > problem. > > Im booting from the iso snapshot of september (amd64), and im having a > similar issue like this one: > http://unix.derkeiler.com/Mailing-Lists/FreeBSD/current/2006-05/msg00401.html > > When booting i see this * > > Has anyone having a similar problem? > How can i provide better information to get closer to the problem? > > Thanks in advance, > > > > > > * Manually typed copy/paste from screen > > . > . > . > arcmsr0: <Areca SATA......> > mem 0xf...... irq 16 at device 14.0 on pci6 > ARECA RAID ADAPTER0: Driver Version 1.20.00.14 2007-2-05 > ARECA RAID ADAPTER0: FIRMWARE VERSION V1.43 2007-4-17 > panic: bad stray interrupt > cpuid=0 > KDB: enter: panic > Stopped at kdb_enter+0x31: leave > db> bt > Tracing pid 0 tid 0 td 0xff........ > kdb_enter() at kdb_enter+0x31 > panic() ar panic+0x173 > intr_execute_handlers() at intr_execute_handlers+0x184 > Xapix_irs1() at Xapix_irs1+0x7f > --- interrups, rip= ... rsp=.., rbp=... --- > strcat() at strcat+0x3 > intr_event_handler() at intr_event_handler+0x181 > intr_add_handler() at intr_add_handler+0x72 > pci_setup_intr() > pci_setup_intr() > pci_setup_intr() > bus_setup_intr() > arcmsr_attach() > device_attach() > bus_generic_attach() > pci_attach() > device_attach() > bus_generic_attach > device_attach() > . > . > . > > -- > > > __________________ > Phillip Neumann > pneumann_at_gmail.comReceived on Mon Oct 15 2007 - 00:11:03 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:19 UTC