Re: [Bulk] Re: New if_zyd driver

Weongyo Jeong wrote:
> On Thu, Aug 30, 2007 at 04:14:22PM +0200, Ted Lindgreen wrote:
> [... snipped ...]
>   
>> However, the stick needs to be inserted after booting up. Then I can
>> also remove the stick without ill effects (for logmessages see below).
>>
>> When the stick is present during boot, the log shows:
>>  Aug 30 15:25:17 lapje kernel: zyd0: <ZyDAS USB2.0 WLAN, class 255/255, rev 2.00/48.10, addr 2> on uhub4
>>  Aug 30 15:25:17 lapje kernel: zyd0: setting config no failed
>>     
> [... snipped ...]
>
> Hello Ted,
>
> I send you a patch which is attached with this email to fix a reset
> problem of the zyd driver when we reboot.
>
> In my environment, this patch was worked.  Would you please test this
> patch and send me results?  I hope it works.  :-)
>
> Regards,
> Weongyo Jeong
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"

Well, the patch applies cleanly and builds on an amd64:

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA1 #16: Sat Oct 20 14:58:28 PDT 2007
    root_at_borgdemon3.temp.wsu.edu:/usr/obj/usr/src/sys/TURION
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-64 (2210.07-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60f81  Stepping = 1
 
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
  Cores per package: 2

. . . .

zyd0: <Belkin USB2.0 WLAN, class 255/255, rev 2.00/48.10, addr 3> on uhub1
zyd0: HMAC ZD1211B, FW 47.25, RF AL2230, PA 0, address 00:17:3f:b0:d4:97
zyd0: Ethernet address: 00:17:3f:b0:d4:97
zyd0: if_start running deferred for Giant

I realize that the patch wasn't designed to fix my problem (locking up
when zyd0 is on a moderate load--like cvsup'ing).  Nevertheless, here's
what kgdb has to say:

jcooper_at_borgdemon3$ sudo kgdb kernel.debug /var/crash/vmcore.9
[GDB will not be able to debug user-mode threads:
/usr/lib/libthread_db.so: Undefined symbol "ps_pglobal_lookup"]
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "amd64-marcel-freebsd".

Unread portion of the kernel message buffer:
zyd0: could not transmit buffer: SHORT_XFER


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address   = 0x2734
fault code              = supervisor write data, page not present
instruction pointer     = 0x8:0xffffffff808a94fa
stack pointer           = 0x10:0xffffffffab8dfaf0
frame pointer           = 0x10:0xffffffffab8dfb30
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 23 (irq22: ohci0 ehci0)
trap number             = 12
panic: page fault
cpuid = 1
Uptime: 8m38s
Physical memory: 1973 MB
Dumping 233 MB: 218 202 186 170 154 138 122 106 90 74 58 42 26 10

#0  doadump () at pcpu.h:194
194             __asm __volatile("movq %%gs:0,%0" : "=r" (td));
(kgdb)

-------

jmc