on 30.10.2007 14:29 Mike Tancsa said the following: >> I've got exactly the same problem on a machine, running 7.0-BETA1. The >> Problem occurs during the boot, when dhclient is trying to get IP. The >> messages are occuring all the time an it's not possible to use the >> network card at all. >> In my case, the network card and the soundcard are sharing an irq. If I >> don't load the the snd_emu10k1 driver, the network card works perfectly. > Mine are shared interrupts as well, however, they are shared among the > nics, so disabling is not an option > > % vmstat -i > interrupt total rate > irq1: atkbd0 5 0 > irq4: sio0 61332 0 > irq16: em0 1029688695 614 > irq17: em1 em2 em3 775893384 463 > irq19: atapci1 300947 0 > cpu0: timer 3347198272 1997 > cpu1: timer 3347136233 1997 > Total 8500278868 5073 > > > em1 is the one having the problems (and yes, I did check the eeprom issue) > > em1_at_pci1:0:1: class=0x020000 card=0x115e8086 chip=0x105e8086 rev=0x06 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'PRO/1000 PT' > class = network > subclass = ethernet > cap 01[c8] = powerspec 2 supports D0 D3 current D0 > cap 05[d0] = MSI supports 1 message, 64 bit > cap 10[e0] = PCI-Express 1 endpoint > > its also in FastE mode and not gigE. Not sure if that makes a difference > or not. I'm running 1000baseTX. Looks like, that it doesn't depend on that. Ihsan -- ihsan_at_dogan.ch http://blog.dogan.ch/ http://ihsan.dogan.ch/Received on Tue Oct 30 2007 - 13:03:57 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:20 UTC