Also note that amd64 disk1 fails to boot on some SATA cd/dvd drives (gets upto the end of the device detection but then goes into a finite series of read_fail timeouts on the cd/dvd drive)... Details ICH9 with on board SATA/300 P35 Chipset OEM SATA DVD drive On 10/30/07, Thomas David Rivers <rivers_at_dignus.com> wrote: > > Just wanted to report some of my results with installing > the BETA1.5 CDs.... with a CD-ONLY install. > > This is on an Intel quad-core with 2G of memory, and 300G SATA > drive and older ATAPI DVD drive (Intel DG33BU motherboard.) > > First; after you partition & label and choose your distributions; > it's time to remove the "BOOTONLY" CD and place DISC1 in the > drive. There's nothing that tells you this.. if you don't > do this, then the process merrily fails at trying to install > everything.. twice over. After that, you have an opportunity > to try and install again, putting DISC1 in the drive. I'd > suggest a little box saying "remove the BOOTONLY CD, insert DISC1 > and press OK" when it's time to start installing the distributions. > > Second - if you choose the X11 packages in the distributions; > they don't work. The install process complains that it > can't find packages/INDEX on either DISC1 or DISK2. I'm not > sure how to get the X11 packages installed from a CD-only install. > > - Dave Rivers - > > -- > Work: (919) 676-0847 > Get your mainframe programming tools at http://www.dignus.com > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >Received on Wed Oct 31 2007 - 08:43:16 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:20 UTC