Patrick Hajek wrote: >>>>> The upgrade was successful with one exception: >>>>> ad0: 95205MB <TOSHIBA MK1032GAX AB211A> at ata0-master UDMA100 >>>>> acd0: DVDR <MATSHITADVD-RAM UJ-840S/1.52> at ata1-master UDMA33 >>>>> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 >>>>> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 >>>>> acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 >>>>> acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 >>> atapicam is disabled in your kernel configuration, so I assume you >>>> are >>>> loading it as a module. Do you still get the errors above (on acd0) >>>> if >>>> you do *not* load the atapi-cam module? >>>> Thomas. >>> Correct. When I first encountered the error, the vaious components >>> were >>> compiled into the kernel. Taking a wild stab, I decided to see if >>> loading it as a module would result the the same issue and yes, it >>> did. > >> so can you confirm whether you still get the acd0 errors when you do NOT >> load atapi-cam at all (nor have it precompiled in the kernel)? >> >> Thomas. > > Commenting out atapicam_load="YES" in loader.conf and not precompiled it in > the kernel, the errors disappear. > > dmesg shows: > > d0: 95205MB <TOSHIBA MK1032GAX AB211A> at ata0-master UDMA100 > acd0: DVDR <MATSHITADVD-RAM UJ-840S/1.52> at ata1-master UDMA33 > > No sense errors. So, it appears to point to the atapi-cam module. > > Suggestions? Please try the patch I posted to this list 2 days ago. ScottReceived on Wed Sep 12 2007 - 17:15:22 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:17 UTC