Petr Holub wrote: > Hi, > > I've encountered the following problem while building xorg from > ports: > > TCP: [134.76.12.3]:21 to [147.251.54.186]:56914 tcpflags 0x18<PUSH,ACK>; tcp_do_ > segment: FIN_WAIT_1: Received data after socket was closed, sending RST and remo > ving tcpcb > TCP: [134.76.12.3]:21 to [147.251.54.186]:62424 tcpflags 0x18<PUSH,ACK>; tcp_do_ > segment: FIN_WAIT_1: Received data after socket was closed, sending RST and remo > ving tcpcb > TCP: [134.76.12.3]:21 to [147.251.54.186]:55989 tcpflags 0x18<PUSH,ACK>; tcp_do_ > segment: FIN_WAIT_1: Received data after socket was closed, sending RST and remo > ving tcpcb > TCP: [134.76.12.3]:21 to [147.251.54.186]:52923 tcpflags 0x18<PUSH,ACK>; tcp_do_ > segment: FIN_WAIT_1: Received data after socket was closed, sending RST and remo > ving tcpcb > > It occurred from several different addresses and results in being > unable event to ping that IP until reboot. These log messages are informational, if you see ICMP problems it must have another source. KrisReceived on Fri Sep 21 2007 - 17:03:41 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:17 UTC