Hi all, I've installed -CURRENT amd64 yesterday to see how well it plays with my desktop hardware and to get some testing done in the run up to 7.0-REL. The install has been csup'd and rebuilt using the latest sources from HEAD yesterday. The kernel is pretty much GENERIC with the exception of ULE replacing 4BSD, and the debugging options (WITNESS/INVARIANTS/etc) removed. Unfortunately, it seems as though my mouse fails to attach to ums(4) and attaches to uhid(4) instead (this happens with both my custom ULE kernel and a stock GENERIC kernel). The programmable mouse buttons which have been configured to emulate keypresses, work fine via the attachment to ukbd(4) however. The mouse in question is a Razor Copperhead running the latest firmware (v6.20) and attaches successfully to ums(4) on my 6.2-STABLE amd64 install. I've included a full verbose boot log and also the output of usbdevs -dv as attachments. Any help with getting this mouse working would be appreciated, I don't fancy having to buy another mouse just for 7.0-REL ;) Thanks in advance, Jase Thew. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #0: Fri Sep 21 20:07:20 BST 2007 root_at_sheesh7.localdomain:/usr/obj/usr/src/sys/SHEESH7 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80b42000. Calibrating clock(s) ... i8254 clock: 1193213 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2133342232 Hz CPU: Intel(R) Core(TM)2 CPU 6400 _at_ 2.13GHz (2133.34-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 usable memory = 3141451776 (2995 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000c3f000 - 0x00000000b671afff, 3048062976 bytes (744156 pages) avail memory = 3037179904 (2896 MB) ACPI APIC Table: <MSTEST OEMAPIC > INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ULE: setup cpu group 1 ULE: setup cpu 1 ULE: adding cpu 1 to group 1: cpus 1 mask 0x2 ACPI: RSDP _at_ 0x0xfae70/0x0014 (v 0 ACPIAM) ACPI: RSDT _at_ 0x0xbbf90000/0x0038 (v 1 MSTEST TESTONLY 0x08000714 MSFT 0x00000097) ACPI: FACP _at_ 0x0xbbf90200/0x0084 (v 2 MSTEST OEMFACP 0x08000714 MSFT 0x00000097) ACPI: DSDT _at_ 0x0xbbf905c0/0x8E7D (v 1 A0483 A0483035 0x00000035 INTL 0x20060113) ACPI: FACS _at_ 0x0xbbf9e000/0x0040 ACPI: APIC _at_ 0x0xbbf90390/0x006C (v 1 MSTEST OEMAPIC 0x08000714 MSFT 0x00000097) ACPI: MCFG _at_ 0x0xbbf90400/0x003C (v 1 MSTEST OEMMCFG 0x08000714 MSFT 0x00000097) ACPI: OEMB _at_ 0x0xbbf9e040/0x007B (v 1 MSTEST AMI_OEM 0x08000714 MSFT 0x00000097) ACPI: HPET _at_ 0x0xbbf99440/0x0038 (v 1 MSTEST OEMHPET 0x08000714 MSFT 0x00000097) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000 wlan: <802.11 Link Layer> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan_amrr: <AMRR Transmit Rate Control Algorithm> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> io: <I/O> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Sep 21 2007 20:07:13) acpi0: <MSTEST TESTONLY> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route count_size Timecounter "HPET" frequency 14318180 Hz quality 900 acpi0: Power Button (fixed) pci_open(1): mode 1 addr port (0x0cf8) is 0x80010064 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=29a08086) AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bbf00000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 15 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 14 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 14 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 828082806000828 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 828082806000828 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x29a0, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x29a1, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x283f, revid=0x02 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2847, revid=0x02 bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2849, revid=0x02 bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2830, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2831, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=15 map[20]: type I/O Port, range 32, base 0xd880, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2832, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=3 map[20]: type I/O Port, range 32, base 0xdc00, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2833, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type I/O Port, range 32, base 0xe000, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2836, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfebffc00, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0xf2 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2810, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2820, revid=0x02 bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=15 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xec00, size 3, enabled map[14]: type I/O Port, range 32, base 0xe880, size 2, enabled map[18]: type I/O Port, range 32, base 0xe800, size 3, enabled map[1c]: type I/O Port, range 32, base 0xe480, size 2, enabled map[20]: type I/O Port, range 32, base 0xe400, size 4, enabled map[24]: type I/O Port, range 32, base 0xe080, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x283e, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 map[10]: type Memory, range 32, base 0, size 8, memory disabled map[20]: type I/O Port, range 32, base 0x400, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2825, revid=0x02 bus=0, slot=31, func=5 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=15 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xd480, size 3, enabled map[14]: type I/O Port, range 32, base 0xd400, size 2, enabled map[18]: type I/O Port, range 32, base 0xd080, size 3, enabled map[1c]: type I/O Port, range 32, base 0xd000, size 2, enabled map[20]: type I/O Port, range 32, base 0xcc00, size 4, enabled map[24]: type I/O Port, range 32, base 0xc880, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x8000-0x8fff pcib1: memory decode 0xfa700000-0xfe7fffff pcib1: prefetched decode 0xbfe00000-0xdfdfffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x10de, dev=0x0292, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled pcib1: requested memory range 0xfd000000-0xfdffffff: good map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled pcib1: requested memory range 0xc0000000-0xcfffffff: good map[1c]: type Memory, range 64, base 0xfc000000, size 24, enabled pcib1: requested memory range 0xfc000000-0xfcffffff: good map[24]: type I/O Port, range 32, base 0x8c00, size 7, enabled pcib1: requested I/O range 0x8c00-0x8c7f: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 vgapci0: <VGA-compatible display> port 0x8c00-0x8c7f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib2: secondary bus 4 pcib2: subordinate bus 4 pcib2: I/O decode 0x0-0x0 pcib2: prefetched decode 0xdfe00000-0xdfefffff pci4: <ACPI PCI bus> on pcib2 pci4: physical bus=4 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xa000-0xafff pcib3: memory decode 0xfe900000-0xfe9fffff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: physical bus=3 found-> vendor=0x197b, dev=0x2363, revid=0x02 bus=3, slot=0, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xac00, size 3, enabled pcib3: requested I/O range 0xac00-0xac07: in range map[14]: type I/O Port, range 32, base 0xa880, size 2, enabled pcib3: requested I/O range 0xa880-0xa883: in range map[18]: type I/O Port, range 32, base 0xa800, size 3, enabled pcib3: requested I/O range 0xa800-0xa807: in range map[1c]: type I/O Port, range 32, base 0xa480, size 2, enabled pcib3: requested I/O range 0xa480-0xa483: in range map[20]: type I/O Port, range 32, base 0xa400, size 4, enabled pcib3: requested I/O range 0xa400-0xa40f: in range map[24]: type Memory, range 32, base 0xfe9fe000, size 13, enabled pcib3: requested memory range 0xfe9fe000-0xfe9fffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 atapci0: <JMicron JMB363 SATA300 controller> port 0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f mem 0xfe9fe000-0xfe9fffff irq 16 at device 0.0 on pci3 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa400 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfe9fe000 atapci0: AHCI Version 01.00 controller with 2 ports detected ata2: <ATA channel 0> on atapci0 ata2: SATA connect status=00000000 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: SATA connect status=00000000 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xac00 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xa880 ata4: reset tp1 mask=03 ostat0=50 ostat1=50 ata4: stat0=0x50 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=50 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata4: [MPSAFE] ata4: [ITHREAD] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pcib4: secondary bus 2 pcib4: subordinate bus 2 pcib4: I/O decode 0x9000-0x9fff pcib4: memory decode 0xfe800000-0xfe8fffff pcib4: no prefetched decode pci2: <ACPI PCI bus> on pcib4 pci2: physical bus=2 found-> vendor=0x11ab, dev=0x4364, revid=0x12 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfe8fc000, size 14, enabled pcib4: requested memory range 0xfe8fc000-0xfe8fffff: good map[18]: type I/O Port, range 32, base 0x9800, size 8, enabled pcib4: requested I/O range 0x9800-0x98ff: in range pcib4: matched entry for 2.0.INTA pcib4: slot 0 INTA hardwired to IRQ 17 mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0x9800-0x98ff mem 0xfe8fc000-0xfe8fffff irq 17 at device 0.0 on pci2 mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfe8fc000 mskc0: MSI count : 1 mskc0: RAM buffer size : 128KB mskc0: Port 0 : Rx Queue 96KB(0x00000000:0x00017fff) mskc0: Port 0 : Tx Queue 32KB(0x00018000:0x0001ffff) msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x02> on mskc0 msk0: bpf attached msk0: Ethernet address: 00:17:31:8c:ea:52 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50 mskc0: [MPSAFE] mskc0: [FILTER] uhci0: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 23 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 51 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebffc00 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0xb000-0xbfff pcib5: memory decode 0xfea00000-0xfeafffff pcib5: no prefetched decode pcib5: Subtractively decoded bridge. pci5: <ACPI PCI bus> on pcib5 pci5: physical bus=5 found-> vendor=0x168c, dev=0x0013, revid=0x01 bus=5, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfeaf0000, size 16, enabled pcib5: requested memory range 0xfeaf0000-0xfeafffff: good pcib5: matched entry for 5.1.INTA pcib5: slot 1 INTA hardwired to IRQ 22 found-> vendor=0x1102, dev=0x0004, revid=0x04 bus=5, slot=2, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xb880, size 6, enabled pcib5: requested I/O range 0xb880-0xb8bf: in range pcib5: matched entry for 5.2.INTA pcib5: slot 2 INTA hardwired to IRQ 23 found-> vendor=0x1102, dev=0x7003, revid=0x04 bus=5, slot=2, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xbc00, size 3, enabled pcib5: requested I/O range 0xbc00-0xbc07: in range found-> vendor=0x1102, dev=0x4001, revid=0x04 bus=5, slot=2, func=2 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=14 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfeaef800, size 11, enabled pcib5: requested memory range 0xfeaef800-0xfeaeffff: good map[14]: type Memory, range 32, base 0xfeae8000, size 14, enabled pcib5: requested memory range 0xfeae8000-0xfeaebfff: good pcib5: matched entry for 5.2.INTB pcib5: slot 2 INTB hardwired to IRQ 20 found-> vendor=0x11ab, dev=0x4320, revid=0x14 bus=5, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns) intpin=a, irq=15 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfeae4000, size 14, enabled pcib5: requested memory range 0xfeae4000-0xfeae7fff: good map[14]: type I/O Port, range 32, base 0xb400, size 8, enabled pcib5: requested I/O range 0xb400-0xb4ff: in range pcib5: matched entry for 5.4.INTA pcib5: slot 4 INTA hardwired to IRQ 19 ath0: <Atheros 5212> mem 0xfeaf0000-0xfeafffff irq 22 at device 1.0 on pci5 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfeaf0000 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54 ath0: [MPSAFE] ath0: [ITHREAD] ath0: hal channel 2412/a0 -> 1 ath0: hal channel 2412/c0 -> 1 ath0: hal channel 2417/a0 -> 2 ath0: hal channel 2417/c0 -> 2 ath0: hal channel 2422/a0 -> 3 ath0: hal channel 2422/c0 -> 3 ath0: hal channel 2427/a0 -> 4 ath0: hal channel 2427/c0 -> 4 ath0: hal channel 2432/a0 -> 5 ath0: hal channel 2432/c0 -> 5 ath0: hal channel 2437/a0 -> 6 ath0: hal channel 2437/c0 -> 6 ath0: hal channel 2437/d0 -> 6 ath0: hal channel 2442/a0 -> 7 ath0: hal channel 2442/c0 -> 7 ath0: hal channel 2447/a0 -> 8 ath0: hal channel 2447/c0 -> 8 ath0: hal channel 2452/a0 -> 9 ath0: hal channel 2452/c0 -> 9 ath0: hal channel 2457/a0 -> 10 ath0: hal channel 2457/c0 -> 10 ath0: hal channel 2462/a0 -> 11 ath0: hal channel 2462/c0 -> 11 ath0: using obsoleted if_watchdog interface ath0: bpf attached ath0: Ethernet address: 00:0f:b5:89:c4:9d ath0: bpf attached ath0: bpf attached ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 7.9 phy 4.5 radio 5.6 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons pci5: <multimedia, audio> at device 2.0 (no driver attached) pci5: <input device> at device 2.1 (no driver attached) fwohci0: vendor=1102, dev=4001 fwohci0: vendor=1102, dev=4001 fwohci0: <1394 Open Host Controller Interface> mem 0xfeaef800-0xfeaeffff,0xfeae8000-0xfeaebfff irq 20 at device 2.2 on pci5 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfeaef800 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 55 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3c:01:51:09:5b:1b fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x2368000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:02:3c:09:5b:1b fwe0: bpf attached fwe0: Ethernet address: 02:02:3c:09:5b:1b fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:02:3c:01:51:09:5b:1b _at_ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode skc0: <Marvell Gigabit Ethernet> port 0xb400-0xb4ff mem 0xfeae4000-0xfeae7fff irq 19 at device 4.0 on pci5 skc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfeae4000 skc0: interrupt moderation is 100 us skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) skc0: chip ver = 0xb1 skc0: chip rev = 0x09 skc0: SK_EPROM0 = 0x10 skc0: SRAM size = 0x010000 sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: bpf attached sk0: Ethernet address: 00:17:31:8c:fa:5c miibus1: <MII bus> on sk0 e1000phy1: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto skc0: [MPSAFE] skc0: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f,0xe080-0xe08f irq 19 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe400 atapci1: [MPSAFE] atapci1: [ITHREAD] ata5: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xec00 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe880 ata5: reset tp1 mask=03 ostat0=50 ostat1=00 ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata5: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata5: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata5: [MPSAFE] ata5: [ITHREAD] ata6: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xe800 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xe480 ata6: reset tp1 mask=03 ostat0=50 ostat1=00 ata6: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata6: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata6: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata6: [MPSAFE] ata6: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH8 SATA300 controller> port 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f,0xc880-0xc88f irq 19 at device 31.5 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc00 atapci2: [MPSAFE] atapci2: [ITHREAD] ata7: <ATA channel 0> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd480 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd400 ata7: reset tp1 mask=03 ostat0=50 ostat1=00 ata7: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata7: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata7: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata7: [MPSAFE] ata7: [ITHREAD] ata8: <ATA channel 1> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd080 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd000 ata8: reset tp1 mask=03 ostat0=7f ostat1=7f ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat1=0x7f err=0xff lsb=0xff msb=0xff ata8: reset tp2 stat0=ff stat1=ff devices=0x0 ata8: [MPSAFE] ata8: [ITHREAD] acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 sio0: [FILTER] ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed ex_isa_identify() sio: sio0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcdfff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: failed to reset the aux device. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices uhid0: <Razer Razer Copperhead Laser Mouse, class 0/0, rev 1.10/21.00, addr 2> on uhub0 ukbd0: <Razer Razer Copperhead Laser Mouse, class 0/0, rev 1.10/21.00, addr 2> on uhub0 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 ukbd1: <DELL DELL USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> on uhub0 kbd3 at ukbd1 kbd3: ukbd1, generic (0), config:0x0, flags:0x3d0000 uhid1: <DELL DELL USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> on uhub0 ugen0: <X10 Wireless Technology Inc USB Receiver, class 0/0, rev 1.10/1.00, addr 2> on uhub1 Device configuration finished. Reducing kern.maxvnodes 192241 -> 100000 procfs registered lapic: Divisor 2, Frequency 133333897 hz Timecounter "TSC" frequency 2133342232 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: nofirewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) controller detected. ata4-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acd0: <ASUS DVD-E616P3/1.07> DVDROM drive at ata4 as master acd0: read 687KB/s (2750KB/s), 512KB buffer, UDMA100 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: 120mm data disc acd1: <PIONEER DVD-RW DVR-110D/1.41> DVDR drive at ata4 as slave acd1: read 6890KB/s (6890KB/s) write 5511KB/s (6890KB/s), 2000KB buffer, UDMA66 acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd1: Writes: CDR, CDRW, DVDR, test write, burnproof acd1: Audio: play, 256 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: no/blank disc ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad10: 305245MB <WDC WD3200KS-00PFB0 21.00M21> at ata5-master SATA150 ad10: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue ad10: Intel check1 failed ad10: Adaptec check1 failed ad10: LSI (v3) check1 failed ad10: LSI (v2) check1 failed ad10: FreeBSD check1 failed ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad12: 305245MB <WDC WD3200KS-00PFB0 21.00M21> at ata6-master SATA150 ad12: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue ad12: Intel check1 failed ad12: Adaptec check1 failed ad12: LSI (v3) check1 failed ad12: LSI (v2) check1 failed ad12: FreeBSD check1 failed ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad14: 38146MB <WDC WD400JD-75HKA1 14.03G14> at ata7-master SATA150 ad14: 78125000 sectors [77504C/16H/63S] 16 sectors/interrupt 1 depth queue ad14: Intel check1 failed ad14: Adaptec check1 failed ad14: LSI (v3) check1 failed ad14: LSI (v2) check1 failed ad14: FreeBSD check1 failed GEOM_LABEL: Label for provider acd0 is iso9660/FINAL_SUB_BB_ADD. GEOM: new disk ad10 GEOM: new disk ad12 GEOM: new disk ad14 GEOM_LABEL: Label for provider ad10s1 is ntfs/System. GEOM_LABEL: Label for provider ad10s2 is ntfs/Games. GEOM_LABEL: Label for provider ad10s3 is ntfs/Dump. GEOM_LABEL: Label for provider ad12s1 is ntfs/Dump2. (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 1 ioapic0: Assigning PCI IRQ 17 to local APIC 0 ioapic0: Assigning PCI IRQ 18 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 0 ioapic0: Assigning PCI IRQ 20 to local APIC 1 ioapic0: Assigning PCI IRQ 22 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 Trying to mount root from ufs:/dev/ad14s1a start_init: trying /sbin/init ath0: link state changed to UP Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub0 port 1 addr 2: full speed, power 100 mA, config 1, Razer Copperhead Laser Mouse(0x0101), Razer(0x1532), rev 21.00 uhid0 ukbd0 port 2 addr 3: low speed, power 100 mA, config 1, DELL USB Keyboard(0x2003), DELL(0x413c), rev 1.00 ukbd1 uhid1 Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub1 port 1 addr 2: low speed, power 2 mA, config 1, USB Receiver(0x0004), X10 Wireless Technology Inc(0x0bc7), rev 1.00 ugen0 port 2 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub2 port 1 powered port 2 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub3 port 1 powered port 2 powered Controller /dev/usb4: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub4 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered port 7 powered port 8 poweredReceived on Sat Sep 22 2007 - 02:24:34 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:18 UTC