I have two hp dl380's (xeon p4s with ciss) that cannot boot recent GENERIC kernels from -current. run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config run_interrupt_driven_hooks: still waiting after 120 seconds for xpt_config run_interrupt_driven_hooks: still waiting after 180 seconds for xpt_config run_interrupt_driven_hooks: still waiting after 240 seconds for xpt_config run_interrupt_driven_hooks: still waiting after 300 seconds for xpt_config panic: run_interrupt_driven_config_hooks: waited too long cpuid = 0 KDB: enter: panic [thread pid 0 tid 100000 ] Stopped at kdb_enter+0x3a: movl $0,kdb_why db> bt Tracing pid 0 tid 100000 td 0xc0caa020 kdb_enter(c0b68e3a,c0b68e3a,c0b6b277,c1020d08,0,...) at kdb_enter+0x3a panic(c0b6b277,0,c0b6b20e,71,ea60,...) at panic+0x12e run_interrupt_driven_config_hooks(0,101ec00,101ec00,101e000,1025000,...) at run_interrupt_driven_config_hooks+0x1db mi_startup() at mi_startup+0xa6 begin() at begin+0x2c db> show conifhk hook: 0xc0473080 at xpt_config+0 arg: 0 In 6.2-RELEASE, this is what I do get when booting at this point in the kernel: ciss0: command status 0x1 (target status) scsi status 0x2 (probe0:ciss0:0:0:0): error 22 (probe0:ciss0:0:0:0): Unretryable Error ciss0: command status 0x1 (target status) scsi status 0x2 (probe0:ciss0:0:0:0): error 22 (probe0:ciss0:0:0:0): Unretryable Error pass0 at ciss0 bus 0 target 0 lun 0 pass0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device pass0: 135.168MB/s transfers da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: 69455MB (142245120 512 byte sectors: 255H 32S/T 17432C) GEOM: new disk da0 Full 8-current verbose output boot: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Wed Aug 27 13:05:01 PDT 2008 root_at_dl380-1.f5test.net:/usr/obj/usr/src/sys/DL380 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0fdb000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0fdb198. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3185522100 Hz CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3185.52-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> Logical CPUs per core: 2 Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte line size 3rd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte line size real memory = 1073717248 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000003eeaefff, 1038655488 bytes (253578 pages) avail memory = 1038020608 (989 MB) Table 'FACP' at 0x3fffa040 Table 'APIC' at 0x3fffa100 MADT: Found table at 0x3fffa100 MP Configuration Table version 1.4 found at 0xc00f29ca APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: disabled MADT: Found CPU APIC ID 2 ACPI ID 2: disabled MADT: Found CPU APIC ID 4 ACPI ID 4: disabled MADT: Found CPU APIC ID 6 ACPI ID 6: enabled SMP: Added CPU 6 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: disabled MADT: Found CPU APIC ID 3 ACPI ID 3: disabled MADT: Found CPU APIC ID 5 ACPI ID 5: disabled MADT: Found CPU APIC ID 7 ACPI ID 7: disabled ACPI APIC Table: <COMPAQ 00000083> bios32: Found BIOS32 Service Directory header at 0xc00ffee0 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x94 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 6 WARNING: Non-uniform processors. WARNING: Using suboptimal topology. ULE: setup cpu 0 ACPI: RSDP _at_ 0x0xf4f70/0x0014 (v 0 COMPAQ) ACPI: RSDT _at_ 0x0x3fffa000/0x0030 (v 1 COMPAQ P29 0x00000002 Ò 0x0000162E) ACPI: FACP _at_ 0x0x3fffa040/0x0074 (v 1 COMPAQ P29 0x00000002 Ò 0x0000162E) ACPI: DSDT _at_ 0x0x3fffa240/0x3C44 (v 1 COMPAQ DSDT 0x00000001 MSFT 0x0100000B) ACPI: FACS _at_ 0x0x3fffa0c0/0x0040 ACPI: APIC _at_ 0x0x3fffa100/0x00AC (v 1 COMPAQ 00000083 0x00000002 0x00000000) ACPI: SPCR _at_ 0x0x3fffa1c0/0x0050 (v 1 COMPAQ SPCRRBSU 0x00000001 Ò 0x0000162E) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 3, Interrupt 16 at 0xfec01000 MADT: Found IO APIC ID 4, Interrupt 32 at 0xfec02000 MADT: Found IO APIC ID 5, Interrupt 48 at 0xfec03000 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard ioapic3 <Version 1.1> irqs 48-63 on motherboard cpu0 BSP: ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000100f0 pcm: 0x00000400 wlan: <802.11 Link Layer> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Aug 27 2008 13:01:24) npx0: INT 16 interface acpi0: <COMPAQ P29> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xc3d96000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00141166) pcibios: BIOS version 2.10 AcpiOsDerivePciId: \_SB_.PCI0.CFG0.MEM0 -> bus 0 dev 0 func 0 ACPI timer: 0/3 0/3 0/5 1/2 0/3 1/2 1/2 0/3 0/4 0/3 -> 3 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 4 5 7 10 11 15 Validation 0 7 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 4 5 7 10 11 15 Validation 0 5 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 4 5 7 10 11 15 Validation 0 11 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 4 5 7 10 11 15 Validation 0 15 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 4 5 7 10 11 15 Validation 0 11 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 5 7 10 11 15 Validation 0 10 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 4 5 7 10 11 15 Validation 0 15 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pci_link19: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 10 11 15 Validation 0 255 N 0 4 5 7 10 11 15 After Disable 0 255 N 0 4 5 7 10 11 15 pcib0: <ACPI Host-PCI bridge> on acpi0 ACPI: Found matching pin for 0.15.INTA at func 2: 7 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1166, dev=0x0014, revid=0x33 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0014, revid=0x00 domain=0, bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0014, revid=0x00 domain=0, bus=0, slot=0, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4752, revid=0x27 domain=0, bus=0, slot=3, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf1000000, size 24, enabled map[14]: type I/O Port, range 32, base 0x2400, size 8, enabled map[18]: type Memory, range 32, base 0xf0ff0000, size 12, enabled found-> vendor=0x0e11, dev=0xb203, revid=0x01 domain=0, bus=0, slot=4, func=0 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x1800, size 8, enabled map[14]: type Memory, range 32, base 0xf0fe0000, size 9, enabled pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 16 found-> vendor=0x0e11, dev=0xb204, revid=0x01 domain=0, bus=0, slot=4, func=2 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x2800, size 8, enabled map[14]: type Memory, range 32, base 0xf0fd0000, size 11, enabled map[18]: type Memory, range 32, base 0xf0fc0000, size 13, enabled map[1c]: type Memory, range 32, base 0xf0f00000, size 19, enabled pcib0: matched entry for 0.4.INTB pcib0: slot 4 INTB hardwired to IRQ 17 found-> vendor=0x1166, dev=0x0201, revid=0x93 domain=0, bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0212, revid=0x93 domain=0, bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0x2000, size 4, enabled found-> vendor=0x1166, dev=0x0220, revid=0x05 domain=0, bus=0, slot=15, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=7 map[10]: type Memory, range 32, base 0xf0ef0000, size 12, enabled pcib0: matched entry for 0.15.INTA (src \_SB_.IUSB:0) ioapic0: Changing trigger for pin 7 to level ioapic0: Changing polarity for pin 7 to low pcib0: slot 15 INTA routed to irq 7 via \_SB_.IUSB found-> vendor=0x1166, dev=0x0225, revid=0x00 domain=0, bus=0, slot=15, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0004, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 domain=0, bus=0, slot=16, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 domain=0, bus=0, slot=16, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 domain=0, bus=0, slot=17, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 domain=0, bus=0, slot=17, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) vgapci0: <VGA-compatible display> port 0x2400-0x24ff mem 0xf1000000-0xf1ffffff,0xf0ff0000-0xf0ff0fff at device 3.0 on pci0 pci0: <base peripheral> at device 4.0 (no driver attached) pci0: <base peripheral> at device 4.2 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 15.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2000 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x24 lsb=0xff msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 50 ata1: [MPSAFE] ata1: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xf0ef0000-0xf0ef0fff irq 7 at device 15.2 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf0ef0000 ohci0: (New OHCI DeviceId=0x02201166) ioapic0: routing intpin 7 (ISA IRQ 7) to vector 51 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x0e11, dev=0xb178, revid=0x01 domain=0, bus=1, slot=3, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x47 (2130 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type Memory, range 64, base 0xf2dc0000, size 18, enabled map[18]: type I/O Port, range 32, base 0x3000, size 8, enabled map[1c]: type Prefetchable Memory, range 64, base 0xf2cf0000, size 14, enabled pcib1: matched entry for 1.3.INTA pcib1: slot 3 INTA hardwired to IRQ 30 ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem 0xf2dc0000-0xf2dfffff,0xf2cf0000-0xf2cf3fff irq 30 at device 3.0 on pci1 ciss0: Reserved 0x40000 bytes for rid 0x10 type 3 at 0xf2dc0000 ciss0: PERFORMANT Transport ioapic1: routing intpin 14 (PCI IRQ 30) to vector 52 ciss0: [MPSAFE] ciss0: [ITHREAD] ciss0: using 256 of 1024 available commands ciss0: firmware 2.36 ciss0: 2 SCSI channels ciss0: signature 'CISS' ciss0: valence 1 ciss0: supported I/O methods 0xe<simple,performant,MEMQ> ciss0: active I/O method 0x5<performant> ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 0us ciss0: interrupt coalesce count 16 ciss0: max outstanding commands 1024 ciss0: bus types 0x2<ultra3> ciss0: server name '' ciss0: heartbeat 0x3000008e ciss0: 2 physical devices ciss0: 1 logical drive ciss0: logical drive (b0t0): RAID 0, 34304MB online pcib2: <ACPI Host-PCI bridge> on acpi0 pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x14e4, dev=0x16a7, revid=0x02 domain=0, bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xf2ef0000, size 16, enabled pcib2: matched entry for 2.1.INTA pcib2: slot 1 INTA hardwired to IRQ 29 found-> vendor=0x14e4, dev=0x16a7, revid=0x02 domain=0, bus=2, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xf2ee0000, size 16, enabled pcib2: matched entry for 2.2.INTA pcib2: slot 2 INTA hardwired to IRQ 31 pci0:2:1:0: bad VPD cksum, remain 223 bge0: <Compaq NC7781 Gigabit Server Adapter, ASIC rev. 0x1002> mem 0xf2ef0000-0xf2efffff irq 29 at device 1.0 on pci2 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf2ef0000 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: OUI 0x000818, model 0x0016, rev. 2 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:0d:9d:93:cf:f9 ioapic1: routing intpin 13 (PCI IRQ 29) to vector 53 bge0: [MPSAFE] bge0: [ITHREAD] pci0:2:2:0: bad VPD cksum, remain 223 bge1: <Compaq NC7781 Gigabit Server Adapter, ASIC rev. 0x1002> mem 0xf2ee0000-0xf2eeffff irq 31 at device 2.0 on pci2 bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf2ee0000 miibus1: <MII bus> on bge1 brgphy1: <BCM5703 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: OUI 0x000818, model 0x0016, rev. 2 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: bpf attached bge1: Ethernet address: 00:0d:9d:93:cf:f8 ioapic1: routing intpin 15 (PCI IRQ 31) to vector 54 bge1: [MPSAFE] bge1: [ITHREAD] pcib3: <ACPI Host-PCI bridge> on acpi0 pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 pcib4: <ACPI Host-PCI bridge> on acpi0 pci6: <ACPI PCI bus> on pcib4 pci6: domain=0, physical bus=6 found-> vendor=0x14e4, dev=0x5820, revid=0x10 domain=0, bus=6, slot=2, func=0 class=0b-40-00, hdrtype=0x00, mfdev=0 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf7ff0000, size 16, enabled pcib4: matched entry for 6.2.INTA pcib4: slot 2 INTA hardwired to IRQ 26 found-> vendor=0x0e11, dev=0xa0f7, revid=0x14 domain=0, bus=6, slot=30, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0142, statreg=0x0430, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xf7fe0000, size 12, enabled pcib4: matched entry for 6.30.INTA pcib4: slot 30 INTA hardwired to IRQ 18 pci6: <processor> at device 2.0 (no driver attached) pci6: <base peripheral, PCI hot-plug controller> at device 30.0 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:ffffffff kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 56 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode p4tcc0: <CPU Frequency Thermal Control> on cpu0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 0: ioport 0xc00 alloc failed ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xee000-0xeffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0 atrtc0: registered as a time-of-day clock (resolution 1000000us) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0 failed to probe at port 0x3f8 irq 4 on isa0 sn0: not probed (disabled) uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57 uart0: [FILTER] uart0: fast interrupt uart0: console (115200,n,8,1) uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 uart2: not probed (disabled) uart3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. procfs registered lapic: Divisor 2, Frequency 66365047 hz Timecounter "TSC" frequency 3185522100 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0: identify ch->devices=00010000 fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ata0-master: pio=PIO4 wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire acd0: setting PIO4 on CSB5 chip acd0: <COMPAQ CD-ROM SN-124/N104> CDROM drive at ata0 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1: identify ch->devices=00000000 fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config run_interrupt_driven_hooks: still waiting after 120 seconds for xpt_config run_interrupt_driven_hooks: still waiting after 180 seconds for xpt_config run_interrupt_driven_hooks: still waiting after 240 seconds for xpt_config run_interrupt_driven_hooks: still waiting after 300 seconds for xpt_config panic: run_interrupt_driven_config_hooks: waited too long cpuid = 0 KDB: enter: panic [thread pid 0 tid 100000 ] Stopped at kdb_enter+0x3a: movl $0,kdb_why db> for comparison here is -current from June 11 2008 that boots. I tried the July 2008's snapshot and it fails in a similar way to today's -current: OK set hint.sio.0.at="isa" OK set hint.sio.0.port="0x3F8" OK set hint.sio.0.flags="0x10" OK set hint.sio.0.irq="4" OK unload kernel OK load /boot/kernel.old/kernel /boot/kernel.old/kernel text=0x77e034 data=0xba7e0+0xacf78 syms=[0x4+0x81940+0x4+0xacbd8] OK boot -v -s /boot/kernel/acpi.ko text=0x5512c data=0x2640+0x182c syms=[0x4+0x8b80+0x4+0xbe19] loading required module 'kernel' elf32_loadfile: kernel already loaded ACPI autoload failed - no such file or directory GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=000000000009f400 SMAP type=02 base=000000000009f400 len=0000000000000c00 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=01 base=0000000000100000 len=000000003fefa000 SMAP type=03 base=000000003fffa000 len=0000000000006000 SMAP type=02 base=00000000fec00000 len=0000000000010000 SMAP type=02 base=00000000fee00000 len=0000000000010000 SMAP type=02 base=00000000ffc00000 len=0000000000400000 SMAP type=01 base=0000000100000000 len=0000000000000000 Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #6: Wed Jun 11 20:14:47 PDT 2008 root_at_dl380-1.f5test.net:/usr/obj/usr/src/sys/DL380 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc0e16000. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3185638132 Hz CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3185.64-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> Logical CPUs per core: 2 Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte line size 3rd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte line size real memory = 1073717248 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000003eeaefff, 1038655488 bytes (253578 pages) avail memory = 1038147584 (990 MB) MP Configuration Table version 1.4 found at 0xc00f29ca APIC: Using the MPTable enumerator. SMP: Added CPU 6 (BSP) MPTable: <COMPAQ PROLIANT > bios32: Found BIOS32 Service Directory header at 0xc00ffee0 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x94 Other BIOS signatures found: WARNING: Non-uniform processors. WARNING: Using suboptimal topology. ULE: setup cpu 0 ioapic0: Assuming intbase of 0 ioapic0: Routing external 8259A's -> intpin 0 ioapic1: Assuming intbase of 16 ioapic2: Assuming intbase of 32 ioapic3: Assuming intbase of 48 ioapic0: intpin 7 bus PCI ioapic0: intpin 7 trigger: level ioapic0: intpin 7 polarity: low ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic: Routing ExtINT -> LINT0 lapic: LINT0 trigger: edge lapic: LINT0 polarity: high lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard ioapic3 <Version 1.1> irqs 48-63 on motherboard cpu0 BSP: ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000100f0 pcm: 0x00010000 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled io: <I/O> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Jun 11 2008 20:11:11) npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00141166) pcibios: BIOS version 2.10 pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1166, dev=0x0014, revid=0x33 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0014, revid=0x00 domain=0, bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0014, revid=0x00 domain=0, bus=0, slot=0, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4752, revid=0x27 domain=0, bus=0, slot=3, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf1000000, size 24, enabled map[14]: type I/O Port, range 32, base 0x2400, size 8, enabled map[18]: type Memory, range 32, base 0xf0ff0000, size 12, enabled found-> vendor=0x0e11, dev=0xb203, revid=0x01 domain=0, bus=0, slot=4, func=0 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x1800, size 8, enabled map[14]: type Memory, range 32, base 0xf0fe0000, size 9, enabled pcib0: slot 4 INTA routed to irq 16 found-> vendor=0x0e11, dev=0xb204, revid=0x01 domain=0, bus=0, slot=4, func=2 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x2800, size 8, enabled map[14]: type Memory, range 32, base 0xf0fd0000, size 11, enabled map[18]: type Memory, range 32, base 0xf0fc0000, size 13, enabled map[1c]: type Memory, range 32, base 0xf0f00000, size 19, enabled pcib0: slot 4 INTB routed to irq 17 found-> vendor=0x1166, dev=0x0201, revid=0x93 domain=0, bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0212, revid=0x93 domain=0, bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0x2000, size 4, enabled found-> vendor=0x1166, dev=0x0220, revid=0x05 domain=0, bus=0, slot=15, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=7 map[10]: type Memory, range 32, base 0xf0ef0000, size 12, enabled pcib0: slot 15 INTA routed to irq 7 found-> vendor=0x1166, dev=0x0225, revid=0x00 domain=0, bus=0, slot=15, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0004, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 domain=0, bus=0, slot=16, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 domain=0, bus=0, slot=16, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 domain=0, bus=0, slot=17, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0101, revid=0x05 domain=0, bus=0, slot=17, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0142, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) vgapci0: <VGA-compatible display> port 0x2400-0x24ff mem 0xf1000000-0xf1ffffff,0xf0ff0000-0xf0ff0fff at device 3.0 on pci0 pci0: <base peripheral> at device 4.0 (no driver attached) pci0: <base peripheral> at device 4.2 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 15.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2000 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x24 lsb=0xff msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 48 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 49 ata1: [MPSAFE] ata1: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xf0ef0000-0xf0ef0fff irq 7 at device 15.2 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf0ef0000 ohci0: (New OHCI DeviceId=0x02201166) ioapic0: routing intpin 7 (PCI IRQ 7) to vector 50 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered pcib1: <MPTable Host-PCI bridge> pcibus 1 on motherboard pci1: <PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x0e11, dev=0xb178, revid=0x01 domain=0, bus=1, slot=3, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x47 (2130 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type Memory, range 64, base 0xf2dc0000, size 18, enabled map[18]: type I/O Port, range 32, base 0x3000, size 8, enabled map[1c]: type Prefetchable Memory, range 64, base 0xf2cf0000, size 14, enabled pcib1: slot 3 INTA routed to irq 30 ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem 0xf2dc0000-0xf2dfffff,0xf2cf0000-0xf2cf3fff irq 30 at device 3.0 on pci1 ciss0: Reserved 0x40000 bytes for rid 0x10 type 3 at 0xf2dc0000 ioapic1: routing intpin 14 (PCI IRQ 30) to vector 51 ciss0: [MPSAFE] ciss0: [ITHREAD] ciss0: using 256 of 1024 available commands ciss0: firmware 2.36 ciss0: 2 SCSI channels ciss0: signature 'CISS' ciss0: valence 1 ciss0: supported I/O methods 0xe<simple,performant,MEMQ> ciss0: active I/O method 0x3<simple> ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 1000us ciss0: interrupt coalesce count 16 ciss0: max outstanding commands 1024 ciss0: bus types 0x2<ultra3> ciss0: server name '' ciss0: heartbeat 0x3000006e ciss0: 2 physical devices ciss0: 1 logical drive ciss0: logical drive (b0t0): RAID 0, 34304MB online pcib3: <MPTable Host-PCI bridge> pcibus 3 on motherboard pci3: <PCI bus> on pcib3 pci3: domain=0, physical bus=3 pcib6: <MPTable Host-PCI bridge> pcibus 6 on motherboard pci6: <PCI bus> on pcib6 pci6: domain=0, physical bus=6 found-> vendor=0x14e4, dev=0x5820, revid=0x10 domain=0, bus=6, slot=2, func=0 class=0b-40-00, hdrtype=0x00, mfdev=0 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf7ff0000, size 16, enabled pcib6: slot 2 INTA routed to irq 26 found-> vendor=0x0e11, dev=0xa0f7, revid=0x14 domain=0, bus=6, slot=30, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0142, statreg=0x0430, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xf7fe0000, size 12, enabled pcib6: slot 30 INTA routed to irq 18 pci6: <processor> at device 2.0 (no driver attached) pci6: <base peripheral, PCI hot-plug controller> at device 30.0 (no driver attached) pcib2: <MPTable Host-PCI bridge> pcibus 2 on motherboard pci2: <PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x14e4, dev=0x16a7, revid=0x02 domain=0, bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xf2ef0000, size 16, enabled pcib2: slot 1 INTA routed to irq 29 found-> vendor=0x14e4, dev=0x16a7, revid=0x02 domain=0, bus=2, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xf2ee0000, size 16, enabled pcib2: slot 2 INTA routed to irq 31 pci0:2:1:0: bad VPD cksum, remain 223 bge0: <Compaq NC7781 Gigabit Server Adapter, ASIC rev. 0x1002> mem 0xf2ef0000-0xf2efffff irq 29 at device 1.0 on pci2 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf2ef0000 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: OUI 0x000818, model 0x0016, rev. 2 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:0d:9d:93:cf:f9 ioapic1: routing intpin 13 (PCI IRQ 29) to vector 52 bge0: [MPSAFE] bge0: [ITHREAD] pci0:2:2:0: bad VPD cksum, remain 223 bge1: <Compaq NC7781 Gigabit Server Adapter, ASIC rev. 0x1002> mem 0xf2ee0000-0xf2eeffff irq 31 at device 2.0 on pci2 bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf2ee0000 miibus1: <MII bus> on bge1 brgphy1: <BCM5703 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: OUI 0x000818, model 0x0016, rev. 2 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: bpf attached bge1: Ethernet address: 00:0d:9d:93:cf:f8 ioapic1: routing intpin 15 (PCI IRQ 31) to vector 53 bge1: [MPSAFE] bge1: [ITHREAD] cpu0 on motherboard p4tcc0: <CPU Frequency Thermal Control> on cpu0 eisa0: <EISA bus> on motherboard mainboard0: <CPQ0727 (System Board)> at slot 0 on eisa0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed 0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xee000-0xeffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:ffffffff kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0 atrtc0: registered as a time-of-day clock (resolution 1000000us) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ic_type 90 part_id 73 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: ic_type 90 part_id 73 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 55 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 sio0: [FILTER] sn0: not probed (disabled) uart0: <ns8250> failed to probe at port 0x3f8 irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 uart2: not probed (disabled) uart3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. procfs registered lapic: Divisor 2, Frequency 66367465 hz Timecounter "TSC" frequency 3185638132 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0: identify ch->devices=00010000 ata0-master: pio=PIO4 wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire acd0: setting PIO4 on CSB5 chip acd0: <COMPAQ CD-ROM SN-124/N104> CDROM drive at ata0 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1: identify ch->devices=00000000 da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C) GEOM: new disk da0 pass0 at ciss0 bus 0 target 0 lun 0 pass0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device pass0: 135.168MB/s transfers ATA PseudoRAID loaded WARNING: WITNESS option enabled, expect reduced performance. lock order reversal: (sleepable after non-sleepable) 1st 0xc43d601c struct mount mtx (struct mount mtx) _at_ /usr/src/sys/kern/vfs_subr.c:343 2nd 0xc43d6000 vfslock (vfslock) _at_ /usr/src/sys/kern/vfs_subr.c:370 KDB: stack backtrace: db_trace_self_wrapper(c0b46739,c3d9cb68,c07cf01e,c0b48fa6,c43d6000,...) at db_trace_self_wrapper+0x26 kdb_backtrace(c0b48fa6,c43d6000,c0b4ed2d,c0b4ed2d,c0b4f2d2,...) at kdb_backtrace+0x29 witness_checkorder(c43d6000,1,c0b4f2d2,172,4,...) at witness_checkorder+0x6ee __lockmgr_args(c43d6000,200100,c43d601c,0,0,...) at __lockmgr_args+0x221 vfs_busy(c43d6000,200,0,c409ed20,1,...) at vfs_busy+0x1d4 vfs_mount_alloc(0,c0bf9bc0,c0b4f078,c409ed20,c080cf40,...) at vfs_mount_alloc+0x78 vfs_mountroot(c0c6a5d0,4,c0b3e263,264,0,...) at vfs_mountroot+0x26f start_init(0,c3d9cd38,c0b3fbac,324,c409cd0c,...) at start_init+0x65 fork_exit(c0756550,0,c3d9cd38) at fork_exit+0xc5 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip = 0, esp = 0xc3d9cd70, ebp = 0 --- lock order reversal: (sleepable after non-sleepable) 1st 0xc4225e10 vnode interlock (vnode interlock) _at_ /usr/src/sys/fs/devfs/devfs_vnops.c:288 2nd 0xc4225df4 devfs (devfs) _at_ /usr/src/sys/kern/vfs_subr.c:2044 KDB: stack backtrace: db_trace_self_wrapper(c0b46739,c3d9ca90,c07cf01e,c0b48fa6,c4225df4,...) at db_trace_self_wrapper+0x26 kdb_backtrace(c0b48fa6,c4225df4,c0b39bed,c0b39bed,c0b4f2d2,...) at kdb_backtrace+0x29 witness_checkorder(c4225df4,9,c0b4f2d2,7fc,c4225df4,...) at witness_checkorder+0x6ee __lockmgr_args(c4225df4,80100,c4225e10,0,0,...) at __lockmgr_args+0x7a8 vop_stdlock(c3d9cb8c,c0b39da3,c0b3cf7a,80100,c4225d9c,...) at vop_stdlock+0x62 VOP_LOCK1_APV(c0bf9ca0,c3d9cb8c,c0c39140,c4225d9c,80100,...) at VOP_LOCK1_APV+0xa5 _vn_lock(c4225d9c,80100,c0b4f2d2,7fc,c0b39da3,...) at _vn_lock+0x5e vget(c4225d9c,80100,c409ed20,121,c0b39d40,...) at vget+0xac devfs_allocv(c41da580,c43d6000,c3d9cc20,c409ed20,c409edc4,...) at devfs_allocv+0x118 devfs_root(c43d6000,80000,c0cbf234,c409ed20,4,...) at devfs_root+0x51 set_rootvnode(c0cbf220,0,c0b4ec2f,5f1,c080cf40,...) at set_rootvnode+0x2d vfs_mountroot(c0c6a5d0,4,c0b3e263,264,0,...) at vfs_mountroot+0x34d start_init(0,c3d9cd38,c0b3fbac,324,c409cd0c,...) at start_init+0x65 fork_exit(c0756550,0,c3d9cd38) at fork_exit+0xc5 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip = 0, esp = 0xc3d9cd70, ebp = 0 --- Trying to mount root from ufs:/dev/da0s1a ct_to_ts([2008-08-27 14:46:04]) = 1219848364.000000000 lock order reversal: (sleepable after non-sleepable) 1st 0xc4225b20 bufobj interlock (bufobj interlock) _at_ /usr/src/sys/kern/vfs_bio.c:2442 2nd 0xd80e5c80 bufwait (bufwait) _at_ /usr/src/sys/kern/vfs_bio.c:2456 KDB: stack backtrace: db_trace_self_wrapper(c0b46739,c3d9c78c,c07cf01e,c0b48fa6,d80e5c80,...) at db_trace_self_wrapper+0x26 kdb_backtrace(c0b48fa6,d80e5c80,c0b4dbf8,c0b4dbf8,c0b4d1a7,...) at kdb_backtrace+0x29 witness_checkorder(d80e5c80,9,c0b4d1a7,998,4,...) at witness_checkorder+0x6ee __lockmgr_args(d80e5c80,81900,c4225b20,c0b4db54,50,...) at __lockmgr_args+0x7a8 getblk(c4225a78,0,0,800,0,...) at getblk+0x16e breadn(c4225a78,0,0,800,0,...) at breadn+0x44 bread(c4225a78,0,0,800,0,...) at bread+0x4c ffs_blkatoff(c4225a78,0,0,0,c3d9c9a8,...) at ffs_blkatoff+0xdf ufs_lookup(c3d9c9ec,c4225a78,0,c4225a78,c3d9ca0c,...) at ufs_lookup+0x2e5 VOP_CACHEDLOOKUP_APV(c0c20aa0,c3d9c9ec,c3d9cb50,c3d9cb3c,c40a3400,...) at VOP_CACHEDLOOKUP_APV+0xa5 vfs_cache_lookup(c3d9ca6c,c3d9ca6c,500000c,80000,c4225a78,...) at vfs_cache_lookup+0xd7 VOP_LOOKUP_APV(c0c20aa0,c3d9ca6c,c0b4e9dd,1b0,c3d9cb3c,...) at VOP_LOOKUP_APV+0xa5 lookup(c3d9cb24,c0b4e9dd,d8,c0,c40a352c,...) at lookup+0x59e namei(c3d9cb24,c3d9cb28,c07ce7ec,0,c0cbeaf0,...) at namei+0x47b kern_unlinkat(c409ed20,ffffff9c,c0b4f074,1,c3d9cc5c,...) at kern_unlinkat+0x46 kern_unlink(c409ed20,c0b4f074,1,62c,0,...) at kern_unlink+0x27 vfs_mountroot_try(c0b4f22e,c0b3cf7c,c0b359ed,1,c080cf40,...) at vfs_mountroot_try+0x472 vfs_mountroot(c0c6a5d0,4,c0b3e263,264,0,...) at vfs_mountroot+0x409 start_init(0,c3d9cd38,c0b3fbac,324,c409cd0c,...) at start_init+0x65 fork_exit(c0756550,0,c3d9cd38) at fork_exit+0xc5 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip = 0, esp = 0xc3d9cd70, ebp = 0 --- start_init: trying /sbin/init bge0: link state changed to DOWN bge0: link UP bge0: link state changed to UP bge1: link state changed to DOWN -- Mark Atkinson atkin901_at_yahoo.com (!wired)?(coffee++):(wired);Received on Wed Aug 27 2008 - 19:50:10 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:34 UTC