I just upgraded an HP Pavillion laptop from 7.1-RC1 to 8-CURRENT last night and now the network doesn't work. This laptop has a RTL8102E chip, and no errors appear in the logs - it attaches and doesn't claim to have any TX/RX errors, but it just doesn't do anything. I've attached the dmesg from a verbose boot. I've seen messages saying there might be issues with MSI interrupts - is that possibly an issue here? -- Bruce Cran Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Tue Dec 16 00:16:09 PST 2008 brucec_at_tau.draftnet:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80ef6000. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1999252745 Hz CPU: AMD Turion(tm) X2 Dual-Core Mobile RM-70 (1999.25-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x200f31 Stepping = 1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x131f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch,OSVW,SKINIT> TSC: P-state invariant Cores per package: 2 L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative usable memory = 4009422848 (3823 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000f24000 - 0x00000000a70effff, 2786902016 bytes (680396 pages) 0x00000000afdbf000 - 0x00000000afe57fff, 626688 bytes (153 pages) 0x00000000afebf000 - 0x00000000afeecfff, 188416 bytes (46 pages) 0x00000000afeff000 - 0x00000000afefffff, 4096 bytes (1 pages) 0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages) avail memory = 3840131072 (3662 MB) ACPI APIC Table: <HPQOEM SLIC-MPC> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP _at_ 0x0xfe020/0x0024 (v 2 HP ) ACPI: XSDT _at_ 0x0xafefe120/0x005C (v 1 HPQOEM SLIC-MPC 0x00000001 0x01000013) ACPI: FACP _at_ 0x0xafefd000/0x00F4 (v 4 HP TRINITY 0x00000003 LOHR 0x01000013) ACPI: DSDT _at_ 0x0xafef0000/0x9FEA (v 1 HP TRINITY 0xF0000000 LOHR 0x01000013) ACPI: FACS _at_ 0x0xafe61000/0x0040 ACPI: HPET _at_ 0x0xafefc000/0x0038 (v 1 HPQOEM SLIC-MPC 0x00000001 LOHR 0x01000013) ACPI: APIC _at_ 0x0xafefb000/0x0084 (v 2 HPQOEM SLIC-MPC 0x00000001 LOHR 0x01000013) ACPI: MCFG _at_ 0x0xafefa000/0x003C (v 1 HPQOEM SLIC-MPC 0x00000001 LOHR 0x01000013) ACPI: BOOT _at_ 0x0xafeef000/0x0028 (v 1 HPQOEM SLIC-MPC 0x00000001 LOHR 0x01000013) ACPI: SLIC _at_ 0x0xafeee000/0x0176 (v 1 HPQOEM SLIC-MPC 0x00000001 LOHR 0x01000013) ACPI: SSDT _at_ 0x0xafeed000/0x0386 (v 1 AMD PowerNow 0x00000001 AMD 0x00000001) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 4 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 2 MADT: Ignoring local NMI routed to ACPI CPU 3 ioapic0 <Version 2.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 wlan: <802.11 Link Layer> ath_rate: version 1.9 <SampleRate bit-rate selection algorithm> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> io: <I/O> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Dec 16 2008 00:16:00) acpi0: <HPQOEM SLIC-MPC> on motherboard PCIe: Memory Mapped configuration base _at_ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] AcpiOsDerivePciId: \\_SB_.PCI0.SMBS.IRQF -> bus 0 dev 20 func 0 acpi0: Power Button (fixed) AcpiOsDerivePciId: \\_SB_.PCI0.NBBI -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.NBMS -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.NBBR -> bus 0 dev 0 func 0 ACPI timer: 1/1 1/1 0/4 0/4 1/2 1/2 1/1 1/2 0/4 0/3 -> 6 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route acpi_hpet0: HPET never increments, disabling device_attach: acpi_hpet0 attach returned 6 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1022, dev=0x9600, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x103c, dev=0x9602, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x9604, revid=0x00 domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1022, dev=0x9605, revid=0x00 domain=0, bus=0, slot=5, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1022, dev=0x9606, revid=0x00 domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1022, dev=0x9607, revid=0x00 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x1002, dev=0x4391, revid=0x00 domain=0, bus=0, slot=17, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x8038, size 3, enabled map[14]: type I/O Port, range 32, base 0x804c, size 2, enabled map[18]: type I/O Port, range 32, base 0x8030, size 3, enabled map[1c]: type I/O Port, range 32, base 0x8048, size 2, enabled map[20]: type I/O Port, range 32, base 0x8010, size 4, enabled map[24]: type Memory, range 32, base 0xd2508000, size 10, enabled pcib0: matched entry for 0.17.INTA pcib0: slot 17 INTA hardwired to IRQ 22 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=18, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 map[10]: type Memory, range 32, base 0xd2507000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4398, revid=0x00 domain=0, bus=0, slot=18, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 map[10]: type Memory, range 32, base 0xd2506000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=18, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd2508500, size 8, enabled pcib0: matched entry for 0.18.INTB pcib0: slot 18 INTB hardwired to IRQ 17 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xd2505000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x4398, revid=0x00 domain=0, bus=0, slot=19, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xd2504000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=19, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd2508400, size 8, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4385, revid=0x3a domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x439c, revid=0x00 domain=0, bus=0, slot=20, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0015, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 MSI supports 1 message map[20]: type I/O Port, range 32, base 0x8000, size 4, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4383, revid=0x00 domain=0, bus=0, slot=20, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xd2500000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x439d, revid=0x00 domain=0, bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4384, revid=0x00 domain=0, bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1300, revid=0x40 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1301, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1302, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1303, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1304, revid=0x00 domain=0, bus=0, slot=24, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x7000-0x7fff pcib1: memory decode 0xd2300000-0xd24fffff pcib1: prefetched decode 0xc0000000-0xcfffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x9612, revid=0x00 domain=0, bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled pcib1: requested memory range 0xc0000000-0xcfffffff: good map[14]: type I/O Port, range 32, base 0x7000, size 8, enabled pcib1: requested I/O range 0x7000-0x70ff: in range map[18]: type Memory, range 32, base 0xd2400000, size 16, enabled pcib1: requested memory range 0xd2400000-0xd240ffff: good map[24]: type Memory, range 32, base 0xd2300000, size 20, enabled pcib1: requested memory range 0xd2300000-0xd23fffff: good pcib1: matched entry for 1.5.INTA pcib1: slot 5 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x960f, revid=0x00 domain=0, bus=1, slot=5, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=7 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xd2410000, size 14, enabled pcib1: requested memory range 0xd2410000-0xd2413fff: good pcib1: matched entry for 1.5.INTB pcib1: slot 5 INTB hardwired to IRQ 19 vgapci0: <VGA-compatible display> port 0x7000-0x70ff mem 0xc0000000-0xcfffffff,0xd2400000-0xd240ffff,0xd2300000-0xd23fffff irq 18 at device 5.0 on pci1 pci1: <multimedia, HDA> at device 5.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 7 pcib2: I/O decode 0x3000-0x6fff pcib2: memory decode 0xd1300000-0xd22fffff pcib2: prefetched decode 0xd0000000-0xd0ffffff pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pcib3: domain 0 pcib3: secondary bus 8 pcib3: subordinate bus 8 pcib3: I/O decode 0xfffff000-0xfff pcib3: memory decode 0xd1200000-0xd12fffff pcib3: no prefetched decode pci8: <ACPI PCI bus> on pcib3 pci8: domain=0, physical bus=8 found-> vendor=0x197b, dev=0x2382, revid=0x00 domain=0, bus=8, slot=0, func=0 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xd1200300, size 8, enabled pcib3: requested memory range 0xd1200300-0xd12003ff: good pcib3: matched entry for 8.0.INTA pcib3: slot 0 INTA hardwired to IRQ 17 found-> vendor=0x197b, dev=0x2381, revid=0x00 domain=0, bus=8, slot=0, func=2 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xd1200200, size 8, enabled pcib3: requested memory range 0xd1200200-0xd12002ff: good pcib3: matched entry for 8.0.INTA pcib3: slot 0 INTA hardwired to IRQ 17 found-> vendor=0x197b, dev=0x2383, revid=0x00 domain=0, bus=8, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xd1200100, size 8, enabled pcib3: requested memory range 0xd1200100-0xd12001ff: good pcib3: matched entry for 8.0.INTA pcib3: slot 0 INTA hardwired to IRQ 17 found-> vendor=0x197b, dev=0x2384, revid=0x00 domain=0, bus=8, slot=0, func=4 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xd1200000, size 8, enabled pcib3: requested memory range 0xd1200000-0xd12000ff: good pcib3: matched entry for 8.0.INTA pcib3: slot 0 INTA hardwired to IRQ 17 pci8: <base peripheral> at device 0.0 (no driver attached) pci8: <base peripheral, SD host controller> at device 0.2 (no driver attached) pci8: <base peripheral> at device 0.3 (no driver attached) pci8: <base peripheral> at device 0.4 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pcib4: domain 0 pcib4: secondary bus 9 pcib4: subordinate bus 9 pcib4: I/O decode 0xfffff000-0xfff pcib4: memory decode 0xd1100000-0xd11fffff pcib4: no prefetched decode pci9: <ACPI PCI bus> on pcib4 pci9: domain=0, physical bus=9 found-> vendor=0x168c, dev=0x001c, revid=0x01 domain=0, bus=9, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0xd1100000, size 16, enabled pcib4: requested memory range 0xd1100000-0xd110ffff: good pcib4: matched entry for 9.0.INTA pcib4: slot 0 INTA hardwired to IRQ 18 ath0: <Atheros 5424/2424> mem 0xd1100000-0xd110ffff irq 18 at device 0.0 on pci9 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd1100000 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 49 ath0: [MPSAFE] ath0: [ITHREAD] ath0: hal channel 2412/a0 -> 1 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2412/c0 -> 1 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2417/a0 -> 2 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2417/c0 -> 2 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2422/a0 -> 3 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2422/c0 -> 3 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2427/a0 -> 4 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2427/c0 -> 4 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2432/a0 -> 5 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2432/c0 -> 5 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2437/a0 -> 6 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2437/c0 -> 6 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2442/a0 -> 7 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2442/c0 -> 7 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2447/a0 -> 8 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2447/c0 -> 8 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2452/a0 -> 9 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2452/c0 -> 9 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2457/a0 -> 10 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2457/c0 -> 10 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2462/a0 -> 11 maxpow 32 minpow 0 maxreg 20 ath0: hal channel 2462/c0 -> 11 maxpow 32 minpow 0 maxreg 20 ath0: WARNING: using obsoleted if_watchdog interface ath0: bpf attached ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 14.2 phy 7.0 radio 10.2 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pcib5: domain 0 pcib5: secondary bus 10 pcib5: subordinate bus 10 pcib5: I/O decode 0x2000-0x2fff pcib5: prefetched decode 0xd1000000-0xd10fffff pci10: <ACPI PCI bus> on pcib5 pci10: domain=0, physical bus=10 found-> vendor=0x10ec, dev=0x8136, revid=0x02 domain=0, bus=10, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled pcib5: requested I/O range 0x2000-0x20ff: in range map[18]: type Prefetchable Memory, range 64, base 0xd1010000, size 12, enabled pcib5: requested memory range 0xd1010000-0xd1010fff: good map[20]: type Prefetchable Memory, range 64, base 0xd1000000, size 16, enabled pcib5: requested memory range 0xd1000000-0xd100ffff: good pcib5: matched entry for 10.0.INTA pcib5: slot 0 INTA hardwired to IRQ 19 re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd1010000-0xd1010fff,0xd1000000-0xd100ffff irq 19 at device 0.0 on pci10 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xd1010000 re0: MSI count : 1 re0: Chip rev. 0x24800000 re0: MAC rev. 0x00200000 miibus0: <MII bus> on re0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: bpf attached re0: Ethernet address: 00:1e:ec:f5:fd:4f ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50 re0: [MPSAFE] re0: [FILTER] atapci0: <ATI (ID=43911002) AHCI controller> port 0x8038-0x803f,0x804c-0x804f,0x8030-0x8037,0x8048-0x804b,0x8010-0x801f mem 0xd2508000-0xd25083ff irq 22 at device 17.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8010 atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xd2508000 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 51 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 6 ports PM supported ata2: <ATA channel 0> on atapci0 ata2: SATA connect time=0ms ata2: BUSY wait time=1ms ata2: SIGNATURE: 00000101 ata2: ahci_reset devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: SATA connect status=00000000 ata3: phy reset found no device ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: SATA connect status=00000000 ata4: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: SATA connect time=0ms ata5: BUSY wait time=1ms ata5: SIGNATURE: eb140101 ata5: ahci_reset devices=00010000 ata5: [MPSAFE] ata5: [ITHREAD] ata6: <ATA channel 4> on atapci0 ata6: SATA connect status=00000000 ata6: phy reset found no device ata6: [MPSAFE] ata6: [ITHREAD] ata7: <ATA channel 5> on atapci0 ata7: SATA connect status=00000000 ata7: phy reset found no device ata7: [MPSAFE] ata7: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xd2507000-0xd2507fff irq 16 at device 18.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd2507000 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xd2506000-0xd2506fff irq 16 at device 18.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd2506000 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 3 ports with 3 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd2508500-0xd25085ff irq 17 at device 18.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xd2508500 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 53 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] ehci0: Dropped interrupts workaround enabled usb2: EHCI version 1.0 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 6 ports with 6 removable, self powered ugen0: <SuYin HP Webcam, class 239/2, rev 2.00/1.00, addr 2> on uhub2 ohci2: <OHCI (generic) USB controller> mem 0xd2505000-0xd2505fff irq 18 at device 19.0 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd2505000 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: <OHCI (generic) USB controller> on ohci2 usb3: USB revision 1.0 uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 3 ports with 3 removable, self powered ohci3: <OHCI (generic) USB controller> mem 0xd2504000-0xd2504fff irq 18 at device 19.1 on pci0 ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd2504000 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: <OHCI (generic) USB controller> on ohci3 usb4: USB revision 1.0 uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 3 ports with 3 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xd2508400-0xd25084ff irq 19 at device 19.2 on pci0 ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xd2508400 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] ehci1: Dropped interrupts workaround enabled usb5: EHCI version 1.0 usb5: companion controllers, 3 ports each: usb3 usb4 usb5: <EHCI (generic) USB 2.0 controller> on ehci1 usb5: USB revision 2.0 uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5 uhub5: 6 ports with 6 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP700 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8000-0x800f irq 16 at device 20.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8000 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54 ata0: [MPSAFE] ata0: [ITHREAD] pci0: <multimedia, HDA> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib6: domain 0 pcib6: secondary bus 128 pcib6: subordinate bus 143 pcib6: I/O decode 0x1000-0x1fff pcib6: no prefetched decode pcib6: Subtractively decoded bridge. pci128: <ACPI PCI bus> on pcib6 pci128: domain=0, physical bus=128 acpi_acad0: <AC Adapter> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz0: _HOT value is absurd, ignored (226.8C) atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 006f atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:006f psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 battery0: <ACPI Control Method Battery> on acpi0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x410 cpu1: <ACPI CPU> on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route Timecounter "HPET" frequency 14318180 Hz quality 900 ahc_isa_probe 0: ioport 0xc00 alloc failed ex_isa_identify() isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: probing non-PnP devices sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 uart2: not probed (disabled) uart3: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 241883 -> 100000 procfs registered lapic: Divisor 2, Frequency 99962656 hz Timecounter "TSC" frequency 1999252745 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0: identify ch->devices=00000000 ata2: identify ch->devices=00000001 acpi_acad0: acline initialization start acata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire pi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start ad4: 238475MB <Hitachi HTS543225L9A300 FBEOC44C> at ata2-master SATA300 ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ad4: Silicon Image check3 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: identify ch->devices=00000000 ata4: identify ch->devices=00000000 ata5: identify ch->devices=00010000 ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ata5: device_reset timeout=1450us acd0: <HL-DT-ST DVDRAM GSA-T50L/SC04> DVDR drive at ata5 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata6: identify ch->devices=00000000 ata7: identify ch->devices=00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 9 to local APIC 1 ioapic0: Assigning ISA IRQ 12 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 1 ioapic0: Assigning PCI IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 17 to local APIC 1 ioapic0: Assigning PCI IRQ 18 to local APIC 0 ioapic0: Assigning PCI IRQ 19 to local APIC 1 ioapic0: Assigning PCI IRQ 22 to local APIC 0 WARNING: WITNESS option enabled, expect reduced performance. battery0: battery initialization done, tried 1 times GEOM_LABEL: Label for provider ad4s2 is ntfs/HP_RECOVERY. Trying to mount root from ufs:/dev/ad4s3a ct_to_ts([2008-12-16 07:53:30]) = 1229414010.000000000 start_init: trying /sbin/init lock order reversal: 1st 0xffffff00014b5070 user map (user map) _at_ /usr/src/sys/vm/vm_map.c:3115 2nd 0xffffff0004cfd7f8 ufs (ufs) _at_ /usr/src/sys/kern/vfs_subr.c:2079 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a _witness_debugger() at _witness_debugger+0x2e witness_checkorder() at witness_checkorder+0x81e __lockmgr_args() at __lockmgr_args+0xca8 ffs_lock() at ffs_lock+0x8c VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b _vn_lock() at _vn_lock+0x47 vget() at vget+0x8b vnode_pager_lock() at vnode_pager_lock+0x1d0 vm_fault() at vm_fault+0x1e2 trap_pfault() at trap_pfault+0x128 trap() at trap+0x51c calltrap() at calltrap+0x8 --- trap 0xc, rip = 0x40014f, rsp = 0x7fffffffee70, rbp = 0x7fffffffee90 ---Received on Tue Dec 16 2008 - 16:30:21 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:39 UTC