Very serious cooling issues CURRENT/STABLE

From: Nathan Lay <nslay_at_comcast.net>
Date: Sun, 21 Dec 2008 00:54:35 -0500
Hi list(s)
Early in the year I noticed CURRENT failed to cool my frankenstein 
Thinkpad T40 (built from T40/40p parts) under load.  The system would 
shut down from critically high temperatures while building a port.  I 
did nothing special with ACPI.  I thought nothing of it since, after 
all, I rebuilt a broken T40 from T40p parts.  Today, however, I noticed 
that a very recent STABLE build failed to keep my T43 cool while 
building ports.  It reached temperatures of 97, 98, 99C.  It used to 
reach a max temperature of 80C while building a port (idling temperature 
is ~ 45C).  It behaved normally from 5.3 all the way through 7.0.  To 
remedy both issues, I had to underclock the processor (via dev.cpu) and 
force the fan to its highest (I'm running 533MHz shy of the processor's 
full potential, with a fan level of 7 to keep the temperature at ~75C).  
I've always suspected FreeBSD's ACPI didn't work properly on Thinkpad T 
series laptops (I have T40, T41, T42 and T43) as it could never fully 
use the fan (Windows XP can rev the fan far higher than acpi_ibm's level 
7).  Between STABLE and CURRENT...something seems very wrong.  These 
systems never had cooling issues with FreeBSD before.

I attached my dmesg and sysctl for hw.acpi, dev.acpi_ibm, and dev.cpu 
for both machines.  I don't think the latter three pieces of information 
will be useful but I could be wrong.  Let me know if there is any other 
information I can provide.

Best Regards,
Nathan Lay

hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 76.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 94.5C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 99.0C
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz0._TC1: 5
hw.acpi.thermal.tz0._TC2: 4
hw.acpi.thermal.tz0._TSP: 600
hw.acpi.battery.life: 99
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 1
hw.acpi.cpu.cx_lowest: C1

dev.acpi_ibm.0.%desc: IBM ThinkPad ACPI Extras
dev.acpi_ibm.0.%driver: acpi_ibm
dev.acpi_ibm.0.%location: handle=\_SB_.PCI0.LPC_.EC__.HKEY
dev.acpi_ibm.0.%pnpinfo: _HID=IBM0068 _UID=0
dev.acpi_ibm.0.%parent: acpi0
dev.acpi_ibm.0.initialmask: 2060
dev.acpi_ibm.0.availmask: 16777215
dev.acpi_ibm.0.events: 0
dev.acpi_ibm.0.eventmask: 2060
dev.acpi_ibm.0.hotkey: 415
dev.acpi_ibm.0.lcd_brightness: 7
dev.acpi_ibm.0.volume: 12
dev.acpi_ibm.0.mute: 1
dev.acpi_ibm.0.thinklight: 0
dev.acpi_ibm.0.bluetooth: 0
dev.acpi_ibm.0.wlan: 1
dev.acpi_ibm.0.fan_speed: 4684
dev.acpi_ibm.0.fan_level: 7
dev.acpi_ibm.0.fan: 0
dev.acpi_ibm.0.thermal: 76 51 40 61 35 -1 28 -1

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-PRERELEASE #0: Wed Dec 10 04:09:36 EST 2008
    nslay_at_LIGHTBULB.LOCAL:/usr/obj/usr/src/sys/LIGHTBULB
module_register: module g_journal already exists!
Module g_journal failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.86GHz (1862.14-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
  AMD Features=0x100000<NX>
real memory  = 1609433088 (1534 MB)
avail memory = 1567776768 (1495 MB)
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
kbd1 at kbdmux0
netsmb_dev: loaded
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address or length:        0    102C/0 [20070320]
acpi0: <IBM TP-1Y> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 11 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xc0000000-0xc7ffffff,0xb0100000-0xb010ffff irq 11 at device 0.0 on pci1
drm0: <ATI Radeon Mobility X300 M22> on vgapci0
info: [drm] Initialized radeon 1.25.0 20060524
pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xb0200000-0xb020ffff irq 11 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:15:58:09:1b:e7
bge0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> irq 11 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f irq 11 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0000000-0xb00003ff irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib4
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb4000000-0xb4000fff irq 11 at device 0.0 on pci11
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
pcm0: <Intel ICH6 (82801FB)> port 0x1c00-0x1cff,0x1880-0x18bf mem 0xb0000800-0xb00009ff,0xb0000400-0xb00004ff irq 11 at device 30.2 on pci0
pcm0: [ITHREAD]
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18c0-0x18cf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd1800-0xd27ff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: <Parallel port> at port 0x278-0x27f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> on uhub2
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
Timecounter "TSC" frequency 1862138034 Hz quality 800
Timecounters tick every 1.000 msec
The GEOM class JOURNAL is already loaded.
ZFS filesystem version 6
ZFS storage pool version 6
ad0: 57231MB <HTS541060G9AT00 MB3IA60A> at ata0-master UDMA100
acd0: DVDR <MATSHITADVD-RAM UJ-822S/1.61> at ata1-master UDMA33
GEOM_JOURNAL: Journal 273940673: ad0s1e contains data.
GEOM_JOURNAL: Journal 273940673: ad0s1e contains journal.
GEOM_JOURNAL: Journal ad0s1e clean.
Trying to mount root from ufs:/dev/ad0s1a
ath0: <Atheros 5212> mem 0xb4010000-0xb401ffff irq 11 at device 0.0 on cardbus0
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:18:4d:8e:51:42
ath0: mac 7.9 phy 4.5 radio 5.6
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
bridge0: Ethernet address: 96:e4:69:df:24:5b
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R300 Microcode
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]

dev.cpu.0.%desc: ACPI CPU
dev.cpu.0.%driver: cpu
dev.cpu.0.%location: handle=\_PR_.CPU_
dev.cpu.0.%pnpinfo: _HID=none _UID=0
dev.cpu.0.%parent: acpi0
dev.cpu.0.freq: 1333
dev.cpu.0.freq_levels: 1866/27000 1632/23625 1600/23700 1400/20737 1333/20400 1166/17850 1066/17100 932/14962 800/13800 700/12075 600/10350 500/8625 400/6900 300/5175 200/3450 100/1725
dev.cpu.0.cx_supported: C1/1 C2/1 C3/85
dev.cpu.0.cx_lowest: C1
dev.cpu.0.cx_usage: 100.00% 0.00% 0.00%

hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 37.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 89.5C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 93.0C
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz0._TC1: 5
hw.acpi.thermal.tz0._TC2: 4
hw.acpi.thermal.tz0._TSP: 600
hw.acpi.battery.life: 69
hw.acpi.battery.time: 31
hw.acpi.battery.state: 1
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 0
hw.acpi.cpu.cx_lowest: C1

dev.acpi_ibm.0.%desc: IBM ThinkPad ACPI Extras
dev.acpi_ibm.0.%driver: acpi_ibm
dev.acpi_ibm.0.%location: handle=\_SB_.PCI0.LPC_.EC__.HKEY
dev.acpi_ibm.0.%pnpinfo: _HID=IBM0068 _UID=0
dev.acpi_ibm.0.%parent: acpi0
dev.acpi_ibm.0.initialmask: 2060
dev.acpi_ibm.0.availmask: 16777215
dev.acpi_ibm.0.events: 0
dev.acpi_ibm.0.eventmask: 2060
dev.acpi_ibm.0.hotkey: 3328
dev.acpi_ibm.0.lcd_brightness: 7
dev.acpi_ibm.0.volume: 8
dev.acpi_ibm.0.mute: 1
dev.acpi_ibm.0.thinklight: 0
dev.acpi_ibm.0.bluetooth: 0
dev.acpi_ibm.0.wlan: 1
dev.acpi_ibm.0.fan_speed: 0
dev.acpi_ibm.0.fan_level: 0
dev.acpi_ibm.0.fan: 1
dev.acpi_ibm.0.thermal: 37 36 31 37 29 -1 25 -1

dev.cpu.0.%desc: ACPI CPU
dev.cpu.0.%driver: cpu
dev.cpu.0.%location: handle=\_PR_.CPU_
dev.cpu.0.%pnpinfo: _HID=none _UID=0
dev.cpu.0.%parent: acpi0
dev.cpu.0.freq: 1200
dev.cpu.0.freq_levels: 1600/-1 1400/-1 1225/-1 1200/-1 1050/-1 1000/-1 875/-1 800/-1 700/-1 600/-1 525/-1 450/-1 375/-1 300/-1 225/-1 150/-1 75/-1
dev.cpu.0.cx_supported: C1/1 C2/1 C3/85 C4/185
dev.cpu.0.cx_lowest: C3
dev.cpu.0.cx_usage: 0.00% 100.00% 0.00% 0.00%

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0 r186194: Tue Dec 16 22:46:15 EST 2008
    nslay_at_BOTTLE.LOCAL:/usr/obj/usr/src/sys/BOTTLE
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1600MHz (598.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 804651008 (767 MB)
avail memory = 774418432 (738 MB)
kbd1 at kbdmux0
ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address or length:        0    102C/0 [20070320]
acpi0: <IBM TP-1R> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 2ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe0000000-0xe7ffffff,0xc0100000-0xc010ffff irq 11 at device 0.0 on pci1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
cbb0: <TI1520 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
cbb1: <TI1520 PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [FILTER]
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x8000-0x803f mem 0xc0220000-0xc023ffff,0xc0200000-0xc020ffff irq 11 at device 1.0 on pci2
em0: [FILTER]
em0: Ethernet address: 00:09:6b:5f:3a:d0
pci2: <network> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xc0000c00-0xc0000dff,0xc0000800-0xc00008ff irq 11 at device 31.5 on pci0
pcm0: [ITHREAD]
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: <Parallel port> at port 0x278-0x27f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
Timecounter "TSC" frequency 598063934 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38154MB <IC25N040ATCS05 0 CS4OA61A> at ata0-master UDMA100
cardbus1: Expecting link target, got 0x0
cardbus1: Expecting link target, got 0x0
ral0: <Ralink Technology RT2561S> mem 0xc0218000-0xc021ffff irq 11 at device 0.0 on cardbus1
ral0: MAC/BBP RT2561C, RF RT2527
ral0: [ITHREAD]
acd0: CDRW <TOSHIBA DVD-ROM SD-R9012/1121> at ata1-master UDMA33
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad0s1a
lock order reversal:
 1st 0xc3c6f044 user map (user map) _at_ /usr/src/sys/vm/vm_map.c:3115
 2nd 0xc3dec7ac ufs (ufs) _at_ /usr/src/sys/kern/vfs_subr.c:2079
KDB: stack backtrace:
db_trace_self_wrapper(c087b43a,c3b6f918,c05eaa75,4,c0876c93,...) at db_trace_self_wrapper+0x26
kdb_backtrace(4,c0876c93,c3c29728,c3c2ea70,c3b6f974,...) at kdb_backtrace+0x29
_witness_debugger(c087df1b,c3dec7ac,c0871dfd,c3c2ea70,c0884d51,...) at _witness_debugger+0x25
witness_checkorder(c3dec7ac,1,c0884d51,81f,0,...) at witness_checkorder+0x82b
__lockmgr_args(c3dec7ac,200501,c3dec7c8,0,0,...) at __lockmgr_args+0x228
ffs_lock(c3b6fa80,c05ea81b,c08a09cb,200501,c3dec754,...) at ffs_lock+0x82
VOP_LOCK1_APV(c08f5740,c3b6fa80,c3c6ce24,c0905280,c3dec754,...) at VOP_LOCK1_APV+0xa5
_vn_lock(c3dec754,200501,c0884d51,81f,4,...) at _vn_lock+0x5e
vget(c3dec754,200501,c3c6cd80,4b4,0,...) at vget+0xcb
vnode_pager_lock(c14442e8,0,c089dfa4,127,c3b6fc18,...) at vnode_pager_lock+0x1d9
vm_fault(c3c6f000,80db000,2,8,80db000,...) at vm_fault+0x1e9
trap_pfault(5,0,c08a93ff,2e7,c,...) at trap_pfault+0xf5
trap(c3b6fd38) at trap+0x26f
calltrap() at calltrap+0x6
--- trap 0xc, eip = 0x80480e5, esp = 0xbfbfeef0, ebp = 0xbfbfef10 ---
wlan0: Ethernet address: 00:11:50:dc:4c:ed
ral0: need multicast update callback
ral0: need multicast update callback
Received on Sun Dec 21 2008 - 05:07:59 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:39 UTC