Niki Denev wrote: > > Sorry, I must have missed the full output : > > Copied 18 bytes of sense data offset 12: 0x70 0x0 0x5 0x0 0x0 0x0 0x0 > 0xa 0x0 0x0 0x0 0x0 0x20 0x0 0x2 0xcf 0x0 0x0 > (pass0:ahd0:0:0:0): Vendor Specific Command. CDB: 85 8 e 0 0 0 1 0 0 0 > 0 0 0 0 ec 0 > (pass0:ahd0:0:0:0): CAM Status: SCSI Status Error > (pass0:ahd0:0:0:0): SCSI Status: Check Condition > (pass0:ahd0:0:0:0): ILLEGAL REQUEST asc:20,0 > (pass0:ahd0:0:0:0): Invalid command operation code field replaceable opcode 0x85 is ATA command pass-through. I'm not surprised that your drive rejects it. > This is printed right after smartd (from smartmontools) is started, > and I think it's what it causes these messages. > I guess they are harmless too? I'm not familiar with this opcode or why its being used (for quering ATA devices within an array with a SCSI front-end?), but its probably harmless too. -- JustinReceived on Sun Feb 17 2008 - 14:58:25 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:27 UTC