Re: Urgent problem - 7.x doesn't work on HP servers

From: Marian Hettwer <mh_at_kernel32.de>
Date: Mon, 18 Feb 2008 13:04:46 +0100
Hi Ivan,

On Mon, 18 Feb 2008 12:56:10 +0100, Ivan Voras <ivoras_at_freebsd.org> wrote:
> Hi,
> 
> I've again encountered the problem of FreeBSD 7 not wanting to boot on a
> HP server. The last time was early in 7.x development on a HP blade
> (2xdual-core Opteron), without any solution (reported on this list about
> a year ago). This time it's on a ML 350 G5 machine, with a quad-core
Xeon.
> 
I don't have a ML 350 G5 machine at hand, but fwiw I do have a HP BL465c G1
blade. It's a 2 dual core AMD Opteron blade.
Right now it's running FreeBSD 7.0-BETA4. I'm running make world right now
to get a recent RELENG_7

Meanwhile:
[root_at_marian46-23] <~>uname -a                                             
         [12:01:36 on 08-02-18]
FreeBSD marian46-23 7.0-BETA4 FreeBSD 7.0-BETA4 #0: Tue Dec 18 12:07:27 CET
2007     root_at_marian46-23:/usr/obj/usr/src/sys/MOBILE  amd64

dmesg:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA4 #0: Tue Dec 18 12:07:27 CET 2007
    root_at_marian46-23:/usr/obj/usr/src/sys/MOBILE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual-Core AMD Opteron(tm) Processor 2218 (2600.11-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f13  Stepping = 3
 
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  Cores per package: 2
usable memory = 4280225792 (4081 MB)
avail memory  = 4118867968 (3928 MB)
ACPI APIC Table: <HP     00000083>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Dec 18 2007 12:07:17)
acpi0: <HP A13> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
cpu2: <ACPI CPU> on acpi0
powernow2: <PowerNow! K8> on cpu2
cpu3: <ACPI CPU> on acpi0
powernow3: <PowerNow! K8> on cpu3
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem
0xe8000000-0xefffffff,0xf7ff0000-0xf7ffffff irq 20 at device 3.0 on pci0
pci0: <base peripheral> at device 4.0 (no driver attached)
pci0: <base peripheral> at device 4.2 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 21 at device
4.4 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <(0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus> at device 4.6 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pci2: <ACPI PCI bus> on pcib2
bce0: <Broadcom NetXtreme II BCM5706 1000Base-SX (A2)> mem
0xfa000000-0xfbffffff irq 22 at device 3.0 on pci2
miibus0: <MII bus> on bce0
brgphy0: <BCM5706 10/100/1000baseTX/SX PHY> PHY 1 on miibus0
brgphy0:  1000baseSX-FDX, auto
bce0: Ethernet address: 00:1c:c4:aa:08:58
bce0: [ITHREAD]
bce0: ASIC (0x57060021); Rev (A2); Bus (PCI-X, 64-bit, 100MHz); F/W
(0x01090605); Flags( MSI )
bce1: <Broadcom NetXtreme II BCM5706 1000Base-SX (A2)> mem
0xf8000000-0xf9ffffff irq 23 at device 4.0 on pci2
miibus1: <MII bus> on bce1
brgphy1: <BCM5706 10/100/1000baseTX/SX PHY> PHY 1 on miibus1
brgphy1:  1000baseSX-FDX, auto
bce1: Ethernet address: 00:1c:c4:aa:08:88
bce1: [ITHREAD]
bce1: ASIC (0x57060021); Rev (A2); Bus (PCI-X, 64-bit, 100MHz); F/W
(0x01090605); Flags( MSI )
isab0: <PCI-ISA bridge> at device 6.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0x1c00-0x1cff mem
0xf7ee0000-0xf7ee0fff irq 5 at device 7.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci0
usb1: USB revision 1.0
uhub1: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> port 0x3000-0x30ff mem
0xf7ed0000-0xf7ed0fff irq 5 at device 7.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> port 0x3400-0x34ff mem
0xf7ec0000-0xf7ec0fff irq 5 at device 7.2 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <(0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 4 ports with 4 removable, self powered
pcib3: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 15.0 on pci4
pci5: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 20 at device 16.0 on pci4
pci12: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 17.0 on pci4
pci19: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci19
pci20: <ACPI PCI bus> on pcib7
pcib8: <PCI-PCI bridge> at device 4.0 on pci20
pci21: <PCI bus> on pcib8
ciss0: <HP Smart Array E200i> port 0x4000-0x40ff mem
0xfdf80000-0xfdffffff,0xfdf70000-0xfdf77fff irq 19 at device 8.0 on pci20
ciss0: [ITHREAD]
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 18.0 on pci4
pci22: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> irq 17 at device 19.0 on pci4
pci25: <ACPI PCI bus> on pcib10
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <Standard PC COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio0: type 16550A, console
sio0: [FILTER]
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcafff,0xcb000-0xcefff,0xcf000-0xd07ff,0xe6000-0xe7fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub0
kbd2 at ukbd0
ums0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub0
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
uhub4: <HP Virtual Hub, class 9/0, rev 1.10/0.01, addr 3> on uhub0
uhub4: 7 ports with 7 removable, self powered
Timecounters tick every 1.000 msec
hptrr: no controller detected.
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-5 device 
da0: 135.168MB/s transfers
da0: 69973MB (143305920 512 byte sectors: 255H 32S/T 17562C)
Trying to mount root from ufs:/dev/da0s1a

HTH,
Marian
Received on Mon Feb 18 2008 - 11:23:33 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:27 UTC