upkhy ed driver problem

Hi,
I've problem with upkhy at ed - my pcmcia card don't work.
I'm using FreeBSD 8.0-CURRENT-200801 but I noticed issue in 5, 6 and 7 branch.
My dmesg:

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT-200801 #1: Sat Jan 26 18:24:09 UTC 2008
    root_at_:/usr/src/sys/i386/compile/TEST
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (747.70-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 335462400 (319 MB)
avail memory = 314515456 (299 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Jan 26 2008 16:08:15)
acpi0: <DELL CPi R  > on motherboard
acpi0: [ITHREAD]
acpi0: reservation of 0, 9fc00 (3) failed
acpi0: reservation of 100000, 13ef0000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xec00-0xecff mem
0xfd000000-0xfdffffff,0xfcfff000-0xfcffffff irq 11 at device 0.0 on
pci1
acpi_video0: <ACPI video extension> on vgapci0
drm0: <Rage Mobility P/M AGP 2X> on vgapci0
info: [drm] AGP at 0xf4000000 64MB
info: [drm] Initialized mach64 1.0.0 20020904
cbb0: <TI1225 PCI-CardBus Bridge> at device 3.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
cbb1: <TI1225 PCI-CardBus Bridge> at device 3.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x860-0x86f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff
irq 11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 8.0 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_dock0: <ACPI Docking Station> on acpi0
acpi_dock0: _EJ0 failed
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq
2 on acpi0
fdc0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 747704647 Hz quality 800
Timecounters tick every 1.000 msec
hptrr: no controller detected.
pccard0: chip_socket_enable
pccard0: read_cis
cis mem map 0xce95a000 (resource: 0x88000000)
pccard0: CIS tuple chain:
CISTPL_DEVICE type=funcspec speed=100ns
 01 03 d4 0a ff
CISTPL_DEVICE_A type=eeprom speed=250ns
 17 03 41 00 ff
CISTPL_MANFID
 20 04 49 01 ab c1
CISTPL_VERS_1
 15 2c 04 01 46 61 73 74 20 45 74 68 65 72 6e 65
 74 00 31 36 2d 62 69 74 20 50 43 20 43 61 72 64
 00 33 2e 30 00 41 58 38 38 31 39 30 00 ff
CISTPL_CONFIG
 1a 05 01 fd c0 03 01
CISTPL_CFTABLE_ENTRY
 1b 07 fd 81 18 45 30 fc be
CISTPL_CFTABLE_ENTRY
 1b 07 05 08 ca 60 00 03 1f
CISTPL_CFTABLE_ENTRY
 1b 07 0d 08 ca 60 20 03 1f
CISTPL_CFTABLE_ENTRY
 1b 07 15 08 ca 60 40 03 1f
CISTPL_CFTABLE_ENTRY
 1b 07 1d 08 ca 60 80 03 1f
CISTPL_CFTABLE_ENTRY
 1b 07 25 08 ca 60 00 02 1f
CISTPL_CFTABLE_ENTRY
 1b 07 2d 08 ca 60 20 02 1f
CISTPL_CFTABLE_ENTRY
 1b 07 35 08 ca 60 40 02 1f
CISTPL_FUNCID
 21 02 06 00
unhandled CISTPL 14
CISTPL_NO_LINK
 14 00
CISTPL_END
 ff
pccard0: check_cis_quirks
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: Fast Ethernet, 16-bit PC Card, 3.0, AX88190
pccard0: Manufacturer code 0x149, product 0xc1ab
pccard0: function 0: network adapter, ccr addr 3c0 mask 1
pccard0: function 0, config table entry 61: I/O card; irq mask befc;
iomask 5, iospace 0-1f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 5: I/O card; irq mask befc;
iomask a, iospace 300-31f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 13: I/O card; irq mask befc;
iomask a, iospace 320-33f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 21: I/O card; irq mask befc;
iomask a, iospace 340-35f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 29: I/O card; irq mask befc;
iomask a, iospace 380-39f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 37: I/O card; irq mask befc;
iomask a, iospace 200-21f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 45: I/O card; irq mask befc;
iomask a, iospace 220-23f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 53: I/O card; irq mask befc;
iomask a, iospace 240-25f; mwait_required io16 irqlevel
pccard0: functions scanning
pccard0: Card has 1 functions. pccard_mfc is 0
pccard0: I/O rid 0 start 0 end ffffffff
pccard0: ccr_res == 88000000-880003ff, base=3c0
pccard0: function 0 CCR at 0 offset 3c0: 7d 0 40 40, 40 2 0 0, 0
ed1: <Fast Ethernet 16-bit PC Card> at port 0x100-0x11f irq 11
function 0 config 61 on pccard0
ed1: ccr_write of 0 to 0xa (0x3c0)
ed1: ccr_write of 0x1 to 0xc (0x3c0)
ed1: ccr_write of 0x4 to 0x2 (0x3c0)
ed1: [ITHREAD]
ed1: using obsoleted if_watchdog interface
ed1: Ethernet address: 00:e0:98:be:42:e6
miibus0: <MII bus> on ed1
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus0
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus0
ukphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus0
ukphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy5: <Generic IEEE 802.3u media interface> PHY 5 on miibus0
ukphy5:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy6: <Generic IEEE 802.3u media interface> PHY 6 on miibus0
ukphy6:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy7: <Generic IEEE 802.3u media interface> PHY 7 on miibus0
ukphy7:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy8: <Generic IEEE 802.3u media interface> PHY 8 on miibus0
ukphy8:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy9: <Generic IEEE 802.3u media interface> PHY 9 on miibus0
ukphy9:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy10: <Generic IEEE 802.3u media interface> PHY 10 on miibus0
ukphy10:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy11: <Generic IEEE 802.3u media interface> PHY 11 on miibus0
ukphy11:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy12: <Generic IEEE 802.3u media interface> PHY 12 on miibus0
ukphy12:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy13: <Generic IEEE 802.3u media interface> PHY 13 on miibus0
ukphy13:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy14: <Generic IEEE 802.3u media interface> PHY 14 on miibus0
ukphy14:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy15: <Generic IEEE 802.3u media interface> PHY 15 on miibus0
ukphy15:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX,
1000baseT, 1000baseT-FDX
ukphy16: <Generic IEEE 802.3u media interface> PHY 16 on miibus0
ukphy16:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pccard0: function 0 CCR at 0 offset 3c0 mask 1: 7d 4 0 0, 0 1 7d 7d, 7d
ad0: 57231MB <FUJITSU MHT2060AH PL 006C> at ata0-master UDMA33
acd0: CDROM <TEAC CD-ROM CD-224E/3.7C> at ata1-master UDMA33
WARNING: WITNESS option enabled, expect reduced performance.
GEOM_LABEL: Label for provider ad0s2 is ext2fs/denatka.
GEOM_LABEL: Label for provider ad0s4 is ext2fs//home.
Trying to mount root from ufs:/dev/ad0s1a
GEOM_LABEL: Label ext2fs//home removed.