On Thu, 21 Feb 2008 18:40:36 +0100 Dag-Erling Smørgrav <des_at_des.no> wrote: > Mikael Ikivesi <mikael.ikivesi_at_pp.inet.fi> writes: > I agree with Kris, it looks like hardware trouble. Are you sure your > laptop is not overheating? Does it run powerd? Are the fans or > exhaust louvers blocked? > > Have you tried booting without X and running 'make -j8 buildworld' or > something similar? > > DES I have checked for overheating as it was my first quess but the answer is no. And these dumps happened without powerd. I only manually enable 1800Mhz sometimes if I need extra speed. It seems to be highest sustainable speed for this machine. Powerd heats this laptop too much without manually setting _PSV value to much lower. And the result would be the same 1800Mhz. When I build world the system with 800Mhz temperature stays between 44-52C. I have successfully built world and lot of ports without problems. These dumps are rare. I have only had 3 of them. (don't have 1st coredump anymore, happened while building hplip..) As these dont happen very often it is hard to test with or without X. I am not sure, but if I remember correctly the first happened without X, but my memory might fail me here.. On Thu, 21 Feb 2008 18:47:24 +0100 Svein Skogen <svein-listmail_at_d80.iso100.no> wrote: > Could you add the following extra info (in case this is more than an > isolated hardware failure): > > Your /var/run/dmesg.boot > > Laptop make & model, and (if any) docking station used. And got no docking. -mikael Here is the info you asked: -------------/var/run/dmesg.boot----------------------- Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-PRERELEASE #1: Fri Feb 15 12:25:21 EET 2008 root_at_localhost:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Mobile AMD Athlon(tm) 64 Processor 3700+ (800.00-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x20f42 Stepping = 2 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> AMD Features2=0x1<LAHF> real memory = 938082304 (894 MB) avail memory = 908603392 (866 MB) ACPI APIC Table: <PTLTD APIC > ioapic0 <Version 2.1> irqs 0-23 on motherboard wlan: mac acl policy registered kbd1 at kbdmux0 netsmb_dev: loaded acpi0: <PTLTD RSDT> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21 acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, 1000 (3) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xc8000000-0xcfffffff,0xc0100000-0xc010ffff irq 17 at device 5.0 on pci1 ohci0: <ATI SB400 USB Controller> mem 0xc0000000-0xc0000fff irq 19 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <ATI SB400 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered ohci1: <ATI SB400 USB Controller> mem 0xc0001000-0xc0001fff irq 19 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <ATI SB400 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 4 ports with 4 removable, self powered ehci0: <ATI SB400 USB 2.0 controller> mem 0xc0002000-0xc0002fff irq 19 at device 19.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <ATI SB400 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 8 ports with 8 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 5.0 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xc0208000-0xc02080ff irq 23 at device 7.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0a:e4:ac:90:fa rl0: [ITHREAD] cbb0: <TI6411 PCI-CardBus Bridge> at device 9.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] pci2: <serial bus, FireWire> at device 9.2 (no driver attached) pci2: <mass storage> at device 9.3 (no driver attached) pcm0: <ATI IXP 400> mem 0xc0003400-0xc00034ff irq 17 at device 20.5 on pci0 pcm0: [ITHREAD] pci0: <simple comms, generic modem> at device 20.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Synaptics Touchpad, device ID 0 acpi_ec0: EcRead: failed waiting to get data ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: failed waiting to get data ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: failed waiting to get data ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: failed waiting to get data ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: failed waiting to get data ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: failed waiting to get data ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: failed waiting to get data ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: failed waiting to get data ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: failed waiting to get data ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: failed waiting to get data ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: failed waiting to get data ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE battery0: <ACPI Control Method Battery> on acpi0 acpi_ec0: EcRead: failed waiting to get data ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xc3941300), AE_NO_HARDWARE_RESPONSE acpi_acad0: <AC Adapter> on acpi0 cryptosoft0: <software crypto> on motherboard pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff pnpid ORM0000 on isa0 ROMs> sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual ROMs> consoles, flags=0x300> sio0: configured irq 4 not in bitmap of ROMs> probed irqs 0 sio0: port may not be enabled sio0: configured irq ROMs> 4 not in bitmap of probed irqs 0 sio0: port may not be enabled ROMs> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 ROMs> or not responding sio0: [FILTER] sio1: configured irq 3 not in ROMs> bitmap of probed irqs 0 sio1: port may not be enabled vga0: ROMs> <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on ROMs> isa0 SGI XFS with large block numbers, tracing, no debug enabled ROMs> Timecounter "TSC" frequency 800004707 Hz quality 800 Timecounters ROMs> tick every 1.000 msec Fast IPsec: Initialized Security ROMs> Association Processing. ncp_load: loaded ad0: 76319MB <FUJITSU ROMs> MHT2080AT 0022> at ata0-master UDMA100 acd0: DVDR <HL-DT-ST ROMs> DVD-RW GWA-4082N/CW02> at ata1-master UDMA33 pcm0: <Avance Logic ROMs> ALC655 AC97 Codec> GEOM_LABEL: Label for provider ad0s3 is ROMs> ext2fs/Linux. Trying to mount root from ufs:/dev/ad0s1a acd0: ROMs> FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 ROMs> 0x00 0x01 cd0 at ata1 bus 0 target 0 lun 0 cd0: <HL-DT-ST DVD-RW GWA-4082N CW02> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present -------Copy pasted pieces from dmidecode------------- Handle 0x0000, DMI type 0, 20 bytes BIOS Information Vendor: Phoenix Version: R01-A1E Release Date: 06/21/2005 Address: 0xE8B50 Runtime Size: 95408 bytes ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PC Card (PCMCIA) is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available ACPI is supported USB legacy is supported Smart battery is supported BIOS boot specification is supported Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: FUJITSU SIEMENS Product Name: AMILO A1650G Version: -1 Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: FUJITSU SIEMENS Product Name: AMILO A1650G Version: Rev.A Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: N/A Type: Notebook Lock: Not Present Version: N/A Serial Number: None Asset Tag: Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Handle 0x0004, DMI type 4, 32 bytes Processor Information Socket Designation: Socket 754 Type: Central Processor Family: Athlon 64 Manufacturer: AMD ID: 42 0F 02 00 FF FB 8B 07 Signature: Family 15, Model 36, Stepping 2 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) Version: C0 Voltage: 3.3 V External Clock: 800 MHz Max Speed: 2500 MHz Current Speed: 800 MHz Status: Populated, Enabled Upgrade: Socket 754 L1 Cache Handle: 0x0008 L2 Cache Handle: 0x0009 L3 Cache Handle: Not Provided -----------------------------Received on Fri Feb 22 2008 - 08:37:06 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:27 UTC