make buildworld error on FreeBSD 8.0-CURRENT

From: Horus Lee <horus.li_at_gmail.com>
Date: Wed, 2 Jan 2008 18:33:20 +0800
Hey all,

Recently i am running a FreeBSD 8.0-CURRENT(upgraded from FreeBSD
6.2-RELEASE):

# uname -a
FreeBSD header......cn 8.0-CURRENT FreeBSD 8.0-CURRENT #1: Thu Dec 27
08:53:03 CST 2007     horus_at_header....cn:/usr/obj/usr/src/sys/HEADER  i386

machine.

Today, i decided to make it more up-to-date, i cvsuped the source, just type
cd /usr/src ; make buildworld &
Everything went smoothly at first, but suddenly an error occured:

objcopy -S -O binary boot2.out boot2.bin
btxld -v -E 0x2000 -f bin -b
/usr/obj/usr/src/sys/boot/i386/boot2/../btx/btx/btx -l boot2.ldr  -o
boot2.ld -P 1 boot2.bin
kernel: ver=1.01 size=7b0 load=9000 entry=9010 map=16M pgctl=1:1
client: fmt=bin size=14d5 text=0 data=0 bss=0 entry=0
output: fmt=bin size=1d99 text=114 data=1c85 org=0 entry=0
arithmetic expression: syntax error: "7680-/etc/group"
*** Error code 2

Stop in /usr/src/sys/boot/i386/boot2.
*** Error code 1

Stop in /usr/src/sys/boot/i386.
*** Error code 1

Stop in /usr/src/sys/boot.
*** Error code 1

Stop in /usr/src/sys.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.

[1]    Exit 1                        make buildworld

then i rolled back to type the following lines:

chflags -R noschg /usr/obj/usr
rm -rf /usr/obj/usr
cd /usr/src
make cleandir
make cleandir

started to rebuild the world, the same thing happened again.

i searched the maillist and got:
http://lists.freebsd.org/mailman/htdig/freebsd-current/2005-August/054376.html
......

here comes my dmesg, could some one tell me what's wrong?

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #1: Thu Dec 27 08:53:03 CST 2007
    horus_at_header........cn:/usr/obj/usr/src/sys/HEADER
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1703.88-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf12  Stepping = 2

Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 259981312 (247 MB)
avail memory = 240447488 (229 MB)
mptable_probe: MP Config Table has bad signature: \^Bp\M-p
kbd1 at kbdmux0
acpi0: <IntelR MSI ACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, f6f0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem
0xd0000000-0xd7ffffff,0xde000000-0xde07ffff irq 11 at device 2.0 on pci0
agp0: <Intel 82845M (845M GMCH) SVGA controller> on vgapci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xb800-0xb81f irq 11
at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xb000-0xb01f irq 11
at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xb400-0xb41f irq 11
at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem
0xde080000-0xde0803ff irq 9 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem
0xdd000000-0xdd0000ff irq 11 at device 0.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 50:78:9b:31:77:c2
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xcc00-0xcc0f mem 0xde081000-0xde0813ff
irq 11 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
Timecounter "TSC" frequency 1703875300 Hz quality 800
Timecounters tick every 1.000 msec
ad0: DMA limited to UDMA33, controller found non-ATA66 cable
ad0: 38172MB <MAXTOR 6L040J2 AR1.0500> at ata0-master UDMA33
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad0s1a
rl0: link state changed to UP

Greatly thanks...Please help me out :-)
Received on Wed Jan 02 2008 - 09:58:19 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:24 UTC