I'm running RELENG_7_0 as of Jan 9th (on a Dell PE 2950). When I do: dump -3auf - /usr > /host/backup.etv.net/back/zabbix.etv.net._usr.2008-01-11.level-3 sometimes it finishes and sometimes it hangs part way through. I've been backing my 4.x, 5.x and 6.x systems up this way for years without ever having an issue. This box isn't in production yet so I can do whatever testing is needed. I can also provide access to a developer if needed. Looking at the bottom of the dmesg (below) I see: nfs send error 35 for server backup:/back Any help with this issue would be greatly appreciated. Thanks, Elliot zabbix root:~#>uname -a FreeBSD zabbix.etv.net 7.0-RC1 FreeBSD 7.0-RC1 #0: Wed Jan 9 14:45:13 MST 2008 root_at_zabbix.etv.net:/usr/obj/usr/src/sys/GENERIC amd64 zabbix root:~#>dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RC1 #0: Wed Jan 9 14:45:13 MST 2008 root_at_zabbix.etv.net:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU 5110 _at_ 1.60GHz (1597.53-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 usable memory = 4281675776 (4083 MB) avail memory = 4120317952 (3929 MB) ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0: Changing APIC ID to 8 ioapic1: Changing APIC ID to 9 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 64-87 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Jan 9 2008 14:45:01) acpi0: <DELL PE_SC3> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 p4tcc3: <CPU Frequency Thermal Control> on cpu3 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci6: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6 pci7: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7 pci8: <ACPI PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 0.0 on pci8 pci9: <PCI bus> on pcib4 bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9 miibus0: <MII bus> on bce0 brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce0: Ethernet address: 00:19:b9:b8:6a:df bce0: [ITHREAD] bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x02090105); Flags( MFW MSI ) pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7 pci10: <ACPI PCI bus> on pcib5 pcib6: <PCI-PCI bridge> at device 0.3 on pci6 pci11: <PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib8 mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc4e0000-0xfc4fffff irq 78 at device 14.0 on pci2 mfi0: Megaraid SAS driver Ver 2.00 mfi0: 2978 (253222235s/0x0020/0) - Shutdown command received from host mfi0: 2979 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028 0x041f03: Firmware initialization started (PCI ID 0015/1028/1f03/1028) mfi0: 2980 (4278190080s/0x0020/0) - Type 18: Firmware version 1.03.10-0216 mfi0: 2981 (4278190099s/0x0008/0) - Battery Present mfi0: 2982 (4278190099s/0x0020/0) - Type 18: Package version 5.1.1-0040 mfi0: 2983 (4278190127s/0x0004/0) - PD 08(e1/s255) event: Enclosure (SES) discovered on PD 08(e1/s255) mfi0: 2984 (4278190127s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD 08(e1/s255) mfi0: 2985 (4278190127s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255) Info: enclPd=08, scsiType=d, portMap=00, sasAddr=50019090c0d7da00,0000000000000000 mfi0: 2986 (4278190127s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD 00(e1/s0) mfi0: 2987 (4278190127s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0) Info: enclPd=08, scsiType=0, portMap=01, sasAddr=5000c50003928fd5,0000000000000000 mfi0: 2988 (4278190127s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD 01(e1/s1) mfi0: 2989 (4278190127s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1) Info: enclPd=08, scsiType=0, portMap=02, sasAddr=5000c50003929765,0000000000000000 mfi0: 2990 (4278190127s/0x0002/0) - PD 02(e1/s2) event: Inserted: PD 02(e1/s2) mfi0: 2991 (4278190127s/0x0002/0) - Type 29: Inserted: PD 02(e1/s2) Info: enclPd=08, scsiType=0, portMap=04, sasAddr=5000c50003922b81,0000000000000000 mfi0: 2992 (4278190127s/0x0002/0) - PD 03(e1/s3) event: Inserted: PD 03(e1/s3) mfi0: 2993 (4278190127s/0x0002/0) - Type 29: Inserted: PD 03(e1/s3) Info: enclPd=08, scsiType=0, portMap=08, sasAddr=5000c500039296d5,0000000000000000 mfi0: 2994 (4278190127s/0x0002/0) - PD 04(e1/s4) event: Inserted: PD 04(e1/s4) mfi0: 2995 (4278190127s/0x0002/0) - Type 29: Inserted: PD 04(e1/s4) Info: enclPd=08, scsiType=0, portMap=10, sasAddr=5000c50003929e95,0000000000000000 mfi0: 2996 (4278190127s/0x0002/0) - PD 05(e1/s5) event: Inserted: PD 05(e1/s5) mfi0: 2997 (4278190127s/0x0002/0) - Type 29: Inserted: PD 05(e1/s5) Info: enclPd=08, scsiType=0, portMap=20, sasAddr=5000c50003929d81,0000000000000000 mfi0: 2998 (4278190127s/0x0042/0) - Type 22: Dedicated Hot Spare created on PD 05(e1/s5) (ded,rev,ac=1) mfi0: 2999 (253222599s/0x0020/0) - Adapter ticks 253222599 elapsed 48s: Time established as 01/09/08 19:36:39; (48 seconds since power on) mfi0: [ITHREAD] pcib9: <PCI-PCI bridge> at device 0.2 on pci1 pci3: <PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci12: <ACPI PCI bus> on pcib10 pcib11: <PCI-PCI bridge> at device 5.0 on pci0 pci13: <PCI bus> on pcib11 pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci14: <ACPI PCI bus> on pcib12 pcib13: <PCI-PCI bridge> at device 7.0 on pci0 pci15: <PCI bus> on pcib13 pcib14: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci4: <ACPI PCI bus> on pcib14 pcib15: <PCI-PCI bridge> at device 0.0 on pci4 pci5: <PCI bus> on pcib15 bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5 miibus1: <MII bus> on bce1 brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce1: Ethernet address: 00:19:b9:b8:6a:dd bce1: [ITHREAD] bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x02090105); Flags( MFW MSI ) uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0xdce0-0xdcff irq 21 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0xdcc0-0xdcdf irq 20 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0xdca0-0xdcbf irq 21 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc600400-0xfc6007ff irq 21 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 63XXESB USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered uhub4: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2> on uhub3 uhub4: multiple transaction translators uhub4: 2 ports with 2 removable, self powered ukbd0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub4 kbd2 at ukbd0 ums0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub4 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 umass0: <DELL INC. DRAC5 VIRTUAL MEDIA, class 0/0, rev 2.00/0.00, addr 4> on uhub4 umass1: <DELL INC. DRAC5 VIRTUAL MEDIA, class 0/0, rev 2.00/0.00, addr 4> on uhub4 uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 5> on uhub3 uhub5: multiple transaction translators uhub5: 4 ports with 4 removable, self powered pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci16: <ACPI PCI bus> on pcib16 vgapci0: <VGA-compatible display> port 0xec00-0xecff mem 0xd0000000-0xd7ffffff,0xfc1f0000-0xfc1fffff irq 19 at device 13.0 on pci16 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd1: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2> on uhub1 kbd3 at ukbd1 ums0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2> on uhub1 ums0: 5 buttons and Z dir. Timecounters tick every 1.000 msec hptrr: no controller detected. acd0: CDRW <TSSTcorpCD-RW/DVD-ROM TSL462D/DE01> at ata0-master UDMA33 mfi0: 3000 (253222655s/0x0008/0) - Battery temperature is normal mfi0: 3001 (253222655s/0x0008/0) - Current capacity of the battery is above threshold mfid0: <MFI Logical Disk> on mfi0 mfid0: 557568MB (1141899264 sectors) RAID volume 'AR0' is optimal SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! da0 at umass-sim1 bus 1 target 0 lun 0 da0: <Dell Virtual Floppy 123> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: <Dell Virtual CDROM 123> Removable CD-ROM SCSI-0 device cd0: 40.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/mfid0s1a bce0: link state changed to UP logo_saver: the console does not support M_VGA_CG320 module_register_init: MOD_LOAD (logo_saver, 0xffffffffb49ee010, 0) error 19 pid 49887 (try), uid 0: exited on signal 10 (core dumped) mfi0: 3002 (253333350s/0x0008/0) - Battery started charging mfi0: 3003 (253335170s/0x0008/0) - Battery charge complete nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/back nfs send error 35 for server backup:/backReceived on Fri Jan 11 2008 - 15:13:48 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:25 UTC