Hi, I'm attaching a dmesg from 7.0-BETA4, i386, on a HP workstation with an Opteron CPU and 2 GB memory. The main problem is that only 64 MB memory is recognized by FreeBSD (the BIOS and the FreeBSD loader account all of 2 GB). This is a "FYI-only" post as I don't have the hardware any more. Maybe someone gets an idea about the problem. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA4 #1: Fri Dec 7 01:37:55 CET 2007 root_at_finstall.cosmos:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Dual-Core AMD Opteron(tm) Processor 1222 (2992.52-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x40f33 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> Cores per package: 2 real memory = 67108864 (64 MB) avail memory = 51658752 (49 MB) ACPI APIC Table: <HPQOEM xw4550> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning (tbfadt-0324): FADT (revision 3) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 [20070320] ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <HPQOEM SLIC-WKS> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x1100-0x117f mem 0xc4000000-0xc4ffffff,0xa0000000-0xbfffffff,0xc2000000-0xc3ffffff irq 18 at device 0.0 on pci2 pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci63: <ACPI PCI bus> on pcib2 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0xa002> mem 0xc0400000-0xc040ffff irq 19 at device 0.0 on pci63 miibus0: <MII bus> on bge0 brgphy0: <BCM5755 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:1c:c4:98:68:ae bge0: [ITHREAD] atapci0: <\M-_at_ \^B\M-A)%w\M-@\M-h> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2100-0x210f mem 0xc0509000-0xc05093ff irq 22 at device 18.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xc0504000-0xc0504fff irq 16 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xc0505000-0xc0505fff irq 17 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ohci2: <OHCI (generic) USB controller> mem 0xc0506000-0xc0506fff irq 18 at device 19.2 on pci0 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: <OHCI (generic) USB controller> on ohci2 usb2: USB revision 1.0 uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ohci3: <OHCI (generic) USB controller> mem 0xc0507000-0xc0507fff irq 17 at device 19.3 on pci0 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: <OHCI (generic) USB controller> on ohci3 usb3: USB revision 1.0 uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ohci4: <OHCI (generic) USB controller> mem 0xc0508000-0xc0508fff irq 18 at device 19.4 on pci0 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: <OHCI (generic) USB controller> on ohci4 usb4: USB revision 1.0 uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0509400-0xc05094ff irq 19 at device 19.5 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb5: EHCI version 1.0 usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4 usb5: <EHCI (generic) USB 2.0 controller> on ehci0 usb5: USB revision 2.0 uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5 uhub5: 10 ports with 10 removable, self powered uhub6: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/94.15, addr 2> on uhub5 uhub6: single transaction translator uhub6: 3 ports with 2 removable, bus powered ukbd0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.67, addr 3> on uhub6 kbd2 at ukbd0 uhid0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.67, addr 3> on uhub6 umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/11.22, addr 4> on uhub5 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP600 UDMA133 controller> port 0x2140-0x2147,0x2158-0x215b,0x2148-0x214f,0x215c-0x215f,0x2120-0x212f irq 16 at device 20.1 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] pci0: <multimedia> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci7: <ACPI PCI bus> on pcib3 acpi_button0: <Power Button> on acpi0 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/25.00, addr 2> on uhub0 ums0: 4 buttons and Z dir. Timecounters tick every 1.000 msec ad0: 238475MB <Seagate ST3250620AS 3.CHL> at ata0-master UDMA33 acd0: DVDR <ATAPI DVD A DH16A1L/KH37> at ata1-master UDMA33 GEOM_LABEL: Label for provider ad0s2 is ntfs/HP_RECOVERY. GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD7. SMP: AP CPU #1 Launched! da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim0 bus 0 target 0 lun 2 da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da3 at umass-sim0 bus 0 target 0 lun 3 da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI-0 device da3: 40.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from cd9660:/dev/iso9660/FreeBSD7 md60.uzip: 44800 x 16384 blocks ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:26 UTC