On Fri, Feb 22, 2008 at 10:43:22AM +0200, Ian FREISLICH wrote: > Pyun YongHyeon wrote: > > On Thu, Feb 21, 2008 at 01:18:18PM +0200, Ian FREISLICH wrote: > > > Pyun YongHyeon wrote: > > > > On Thu, Feb 21, 2008 at 02:47:43PM +1000, Robert Backhaus wrote: > > > > > On Thu, Feb 21, 2008 at 1:50 PM, Pyun YongHyeon <pyunyh_at_gmail.com> wr > ote: > > > > > > On Thu, Feb 21, 2008 at 11:03:02AM +1000, Robert Backhaus wrote: > > > > > > > I am experiencing roughly 15% packet corruption on the re inter > face > > > on > > > > > > > my freebsd 7/amd64 box. > > > > > > > > > > > > > > FreeBSD gw.flexi.robbak.com 7.0-PRERELEASE FreeBSD 7.0-PRERELEA > SE #8 > > > : > > > > > > > Tue Feb 5 09:49:55 EST 2008 > > > > > > > root_at_gw.flexi.robbak.com:/usr/obj/usr/src/sys/GW amd64 > > > > > > > > > > > > > > Just to make troubleshooting difficult, this problem only shows > up > > > > > > > after the system has been up for roughly 36 hours, depending on > the > > > > > > > amount of traffic. > > > > > > > > > > > > > > > > > > > I didn't take a look attached tcpdump files but I guess the > > > > > > instability issue was fixed in HEAD. It's not yet MFCed but > > > > > > I'll handle it in a week. > > > > > > > > > > > > Would you try re(4) in HEAD? > > > > > > > > > > > > > > > > OK, I'll do that. What is the best way to do that? csupping to "." se > ems a > > > > > bit drastic, and I don't do much with cvs proper. I take it that I sh > ould > > > use > > > > > anon-cvs to grab the directory, but I don't quite know how. > > > > > > > > > > > > > Copy sys/dev/re/if_re.c, sys/pci/if_rlreg.h in HEAD to your box. > > > > Due to lack of m_defrag(9) in 7-PRERELEASE/RC, you also have to add > > > > that function to if_re.c(Copy m_defrag() in sys/kern/uipc_mbuf.c on > > > > HEAD/RELENG_7 to if_re.c). That would make it build on your box. > > > > > > This doesn't solve the problem that I'm seeing on re(4) interfaces. > > > It basically shows up as quagga establishing OSPF neighours as > > > "Exchange/DR" when VLAN hardware tagging is enabled. I'm running > > > OSPF over 802.1Q vlans. Neighbours are correctly negotiated once > > > VLAN hardware tagging is disabled on the interface. > > > > > > I'll do more debugging. > > > > > > > Hmm. That sounds like different issue to me. I guess I din't change > > any semantics in VLAN H/W tagging. Do you still the same VLAN H/W > > tagging related issues on RELENG_7? > > > > To narrow down the issue it would be even better to know which parts > > of H/W assistance was broken. For example, > > - Disable checksum offload for VLAN interface first and check > > whether quagga works. > > You can only disable offload on the parent interface. > > > - Disable checksum offload for parent interface and check again. > > If you can post tcpdump output for broken conntection it may help a > > lot to diagnose the issue. > > The only flag affecting this behaviour is vlanhwtag. Various > permutations of the interface flags make no difference to this > behaviour as long as hardware tagging is enabled. > > It seems like it's corrupting large packets on transmit when vlanhwtag > is enabled. From the tcpdump output it looks like a padding or > packet length issue. > > Here's what tcpdump on the re(4) device thinks it's transmitting: > > 00:08:a1:3c:32:9c > 00:90:fb:0c:89:7d, ethertype 802.1Q (0x8100), length 1510: vlan 1000, p 0, ethertype IPv4, 196.22.138.92 > 196.22.138.89: OSPFv2, Database Description, length: 1472 > > Here's what was actually recieved by the em(4) device on the > neighbour. Note the absense of the 801.1Q header: > > 00:08:a1:3c:32:9c > 00:90:fb:0c:89:7d, ethertype IPv4 (0x0800), length 1506: 196.22.138.92 > 196.22.138.89: OSPFv2, Database Description, length: 1472 > > When vlanhwtagging is disabled, the re(4) device transmits: > > 00:90:fb:0c:89:7d > 00:08:a1:3c:32:9c, ethertype 802.1Q (0x8100), length 1510: vlan 1000, p 0, ethertype IPv4, 196.22.138.89 > 196.22.138.92: OSPFv2, Database Description, length: 1472 > > and the em(4) device recieves: > > 00:08:a1:3c:32:9c > 00:90:fb:0c:89:7d, ethertype 802.1Q (0x8100), length 1510: vlan 1000, p 0, ethertype IPv4, 196.22.138.92 > 196.22.138.89: OSPFv2, Database Description, length: 1472 > > Let me know if you need more detailed tcpdump output than I've provided. > I guess I've found a VLAN hardware tagging bug in re(4). Please try this one and let me know the result. http://people.freebsd.org/~yongari/re/if_re.c http://people.freebsd.org/~yongari/re/if_rlreg.h > Ian > > -- > Ian Freislich > -- Regards, Pyun YongHyeonReceived on Mon Mar 17 2008 - 04:12:15 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:29 UTC