Re: Call for testers : age(4), Attansic/Atheros L1 gigabit ethernet controller

On Wed, May 07, 2008 at 12:11:10AM +0200, kama wrote:

[...]

 > I cant get it to work. When I first applied the patch and rebooted the
 > system the age0 came up in ifconfig. I could apply IP and such, but no
 > packets went through. I rebooted the system and now I get this in dmesg.
 > 
 > # dmesg | grep age0
 > age0: <Attansic Technology Corp, L1 Gigabit Ethernet> mem
 > 0xfeac0000-0xfeafffff irq 19 at device 0.0 on pci3
 > age0: Reserved 0x40000 bytes for rid 0x10 type 3 at 0xfeac0000
 > age0: PCI device revision : 0x00b0
 > age0: Chip id/revision : 0xffff
 > age0: -1 Tx FIFO, -1 Rx FIFO
 > age0: invalid chip revision : 0x00b0 -- not initialized?
 > 

I guess you tried somewhat old patch. Please check README file
in the following URL and update if_age.c, if_agereg.h, if_agevar.h,
atphy.c and atphyreg.h.

http://people.freebsd.org/~yongari/age/README

 > # pciconf -l -v | grep -A4 age0
 > age0_at_pci0:3:0:0:        class=0x020000 card=0x82261043 chip=0x10481969
 > rev=0xb0 hdr=0x00
 >     vendor     = 'Attansic (Now owned by Atheros)'
 >     device     = 'L1 Gigabit Ethernet 10/100/1000Base-T Ethernet
 > Controller'
 >     class      = network
 >     subclass   = ethernet
 > 
 > The system is Asus P2-M2A690G - Socket AM2 (Barebone)
 > 
 > http://www.asus.com.tw/products.aspx?l1=1&l2=3&l3=483&l4=0&model=1797&modelmenu=1
 > 
 > # uname -a
 > FreeBSD gw.qvq.se 7.0-STABLE FreeBSD 7.0-STABLE #1: Tue Apr 29 19:26:43
 > CEST 2008     root_at_gw.qvq.se:/usr/obj/usr/src/sys/GENERIC  i386
 > 
 > One other thing is that the system coredumps at reboot. Which it didnt
 > happened before I applied the patch.

I'm aware of this issue and working on it but it's not reproducable
here so it would take more time. :-(

-- 
Regards,
Pyun YongHyeon