Anyone else seen this? Machine is HP Compaq 6715s and I'm running current (from yesterday). During startup the internal SATA-disk is not detected. I have tried both GENERIC and customized kernel with same bad result. Everything works fine on 7.0R and 6.3R. If I modify ata-chipset.c:ata_ati_ident() and removes the lines that matches the ATA_ATI_IXP600_S1 type chip everything is working when the ata-system uses the default/fallback driver for ATI. dmesg and pciconf -lv attached (from the working system). The releveant message from a failing system are (hand typed off the screen, no serial port available): atapci0: <ATI IXP600 SATA300 controller> port 0x9000-0x9007,0x9007-0x900b,0x9010-0x9017, 0x5018-0x501b,0x5020-0x502f mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0 atapci0: [THREAD] atapci0: AHCI Version 230.07 controller with 4 ports PM not supported ata2: <ATA channel 0> on atapci0 ata2: port not implemented ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: port not implemented ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: port not implemented ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: port not implemented ata5: [ITHREAD] What more info is needed? /Thomas - --------------------------------------------------------------- Svensk Aktuell Elektronik AB Thomas Nyström Box 10 Phone: +46 73 069 69 30 S-191 21 Sollentuna Fax: +46 8 35 92 89 Sweden Email: thn_at_saeab.se --------------------------------------------------------------- hostb0_at_pci0:0:0:0: class=0x060000 card=0x30c2103c chip=0x79101002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' class = bridge subclass = HOST-PCI pcib1_at_pci0:0:1:0: class=0x060400 card=0x30c2103c chip=0x79121002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc' class = bridge subclass = PCI-PCI pcib2_at_pci0:0:4:0: class=0x060400 card=0x30c2103c chip=0x79141002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc' class = bridge subclass = PCI-PCI pcib3_at_pci0:0:5:0: class=0x060400 card=0x30c2103c chip=0x79151002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc' class = bridge subclass = PCI-PCI pcib4_at_pci0:0:6:0: class=0x060400 card=0x30c2103c chip=0x79161002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc' class = bridge subclass = PCI-PCI atapci0_at_pci0:0:18:0: class=0x01018f card=0x43801002 chip=0x43801002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 Serial ATA Controller' class = mass storage subclass = ATA ohci0_at_pci0:0:19:0: class=0x0c0310 card=0x30c2103c chip=0x43871002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 USB Controller (OHCI0)' class = serial bus subclass = USB ohci1_at_pci0:0:19:1: class=0x0c0310 card=0x30c2103c chip=0x43881002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 USB Controller (OHCI1)' class = serial bus subclass = USB ohci2_at_pci0:0:19:2: class=0x0c0310 card=0x30c2103c chip=0x43891002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 USB Controller (OHCI2)' class = serial bus subclass = USB ohci3_at_pci0:0:19:3: class=0x0c0310 card=0x30c2103c chip=0x438a1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 USB Controller (OHCI3)' class = serial bus subclass = USB ohci4_at_pci0:0:19:4: class=0x0c0310 card=0x30c2103c chip=0x438b1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 USB Controller (OHCI4)' class = serial bus subclass = USB ehci0_at_pci0:0:19:5: class=0x0c0320 card=0x30c2103c chip=0x43861002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 USB Controller (EHCI)' class = serial bus subclass = USB none0_at_pci0:0:20:0: class=0x0c0500 card=0x30c2103c chip=0x43851002 rev=0x14 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 SMBUS Controller' class = serial bus subclass = SMBus atapci1_at_pci0:0:20:1: class=0x010182 card=0x30c2103c chip=0x438c1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 ATA Controller' class = mass storage subclass = ATA none1_at_pci0:0:20:2: class=0x040300 card=0x30c2103c chip=0x43831002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 High Definition Audio Controller' class = multimedia isab0_at_pci0:0:20:3: class=0x060100 card=0x30c2103c chip=0x438d1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 PCI to LPC Bridge' class = bridge subclass = PCI-ISA pcib5_at_pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc' device = 'IXP SB600 PCI to PCI Bridge' class = bridge subclass = PCI-PCI hostb1_at_pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = '(K8) Athlon 64/Opteron HyperTransport Technology Configuration' class = bridge subclass = HOST-PCI hostb2_at_pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = '(K8) Athlon 64/Opteron Address Map' class = bridge subclass = HOST-PCI hostb3_at_pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = '(K8) Athlon 64/Opteron DRAM Controller' class = bridge subclass = HOST-PCI hostb4_at_pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = '(K8) Athlon 64/Opteron Miscellaneous Control' class = bridge subclass = HOST-PCI vgapci0_at_pci0:1:5:0: class=0x030000 card=0x30c2103c chip=0x791f1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'RS690 ATI Mobility Radeon x1250' class = display subclass = VGA bge0_at_pci0:16:0:0: class=0x020000 card=0x30c2103c chip=0x171314e4 rev=0x02 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetLink BCM5906M Fast Ethernet PCIe' class = network subclass = ethernet none2_at_pci0:48:0:0: class=0x028000 card=0x1371103c chip=0x431214e4 rev=0x02 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM4310 broadcom wireless 1490 (dell)' class = network cbb0_at_pci0:2:4:0: class=0x060700 card=0x30c2103c chip=0x04761180 rev=0xb6 hdr=0x02 vendor = 'Ricoh Company, Ltd.' device = 'unknown Ricoh R/RL/5C476(II)' class = bridge subclass = PCI-CardBus Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #5: Tue May 13 12:56:24 UTC 2008 root_at_bongo.saeab.se:/usr/obj/usr/src/sys/BONGO WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1995.01-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x60f82 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> Cores per package: 2 real memory = 2012938240 (1919 MB) avail memory = 1966006272 (1874 MB) ACPI APIC Table: <HP 0944 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Error (tbfadt-0516): 32/64X address mismatch in "Pm2ControlBlock": [ 8800] [ 0 8100], using 64X [20070320] ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <HPQOEM SLIC-MPC> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) unknown: I/O range not supported acpi0: reservation of 0, 8000000 (3) failed acpi0: reservation of 100000, fff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xc0000000-0xc7ffffff,0xd0200000-0xd020ffff,0xd0300000-0xd03fffff irq 19 at device 5.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci16: <ACPI PCI bus> on pcib2 bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16 miibus0: <MII bus> on bge0 brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bge0: Ethernet address: 00:1a:4b:83:26:75 bge0: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci32: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci48: <ACPI PCI bus> on pcib4 pci48: <network> at device 0.0 (no driver attached) atapci0: <ATI ATA controller> port 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xd0401000-0xd0401fff irq 23 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xd0402000-0xd0402fff irq 17 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ohci2: <OHCI (generic) USB controller> mem 0xd0403000-0xd0403fff irq 17 at device 19.2 on pci0 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: <OHCI (generic) USB controller> on ohci2 usb2: USB revision 1.0 uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ohci3: <OHCI (generic) USB controller> mem 0xd0404000-0xd0404fff irq 17 at device 19.3 on pci0 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: <OHCI (generic) USB controller> on ohci3 usb3: USB revision 1.0 uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ohci4: <OHCI (generic) USB controller> mem 0xd0405000-0xd0405fff irq 17 at device 19.4 on pci0 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: <OHCI (generic) USB controller> on ohci4 usb4: USB revision 1.0 uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0406000-0xd04060ff irq 23 at device 19.5 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb5: EHCI version 1.0 usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4 usb5: <EHCI (generic) USB 2.0 controller> on ehci0 usb5: USB revision 2.0 uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5 uhub5: 10 ports with 10 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x5040-0x504f irq 16 at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci1 ata1: [ITHREAD] pci0: <multimedia> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib5 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd0100000-0xd0100fff irq 20 at device 4.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: <Logitech USB Mouse, class 0/0, rev 1.10/4.10, addr 2> on uhub1 ums0: 3 buttons and Z dir. Timecounters tick every 1.000 msec acd0: DVDR <TSSTcorpCD/DVDW TS-L632M/0A17> at ata0-master PIO4 ACPI Error (exmutex-0479): Cannot release Mutex [C174], not acquired [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.C08B.C0FE.C172.C1D4] (Node 0xc4d7a0c0), AE_AML_MUTEX_NOT_ACQUIRED ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.C08B.C0FE.C172.C1D5] (Node 0xc4d7a0a0), AE_AML_MUTEX_NOT_ACQUIRED ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.C1EB._PSR] (Node 0xc4d7d940), AE_AML_MUTEX_NOT_ACQUIRED ad4: 152627MB <Seagate ST9160821AS 3.BHE> at ata2-master UDMA33 SMP: AP CPU #1 Launched! WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ad4s3aReceived on Tue May 13 2008 - 10:17:25 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:30 UTC