Cardbus GbE (Realtek 8169SBL) supported?

	I bought a cardbus GbE card used Realtek 8169SBL, today:-).  But
	re(4) doesn't attach it.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
re0: <RealTek 8169 Gigabit Ethernet> port 0x3100-0x31ff mem 0xb0103000-0xb01031ff irq 22 at device 0.0 on cardbus0
re0: reset never completed!
re0: Unknown H/W revision: 7cc00000
device_attach: re0 attach returned 6
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

	I fixed 'Unknown H/W revision' issue, but...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
--- sys/dev/re/if_re.c.orig	2008-04-15 16:02:23.631923000 +0900
+++ sys/dev/re/if_re.c	2008-05-17 23:06:05.632249124 +0900
_at__at_ -225,6 +225,7 _at__at_
 	{ RL_HWREV_8101E, RL_8169, "8101E"},
 	{ RL_HWREV_8168_SPIN2, RL_8169, "8168"},
 	{ RL_HWREV_8168_SPIN3, RL_8169, "8168"},
+	{ RL_HWREV_8169_8110SBL, RL_8169, "8169SBL"},
 	{ 0, 0, NULL }
 };
 
--- sys/pci/if_rlreg.h.orig	2008-03-31 13:03:14.000000000 +0900
+++ sys/pci/if_rlreg.h	2008-05-17 23:07:01.584996720 +0900
_at__at_ -171,6 +171,7 _at__at_
 #define RL_HWREV_8139CPLUS	0x74800000
 #define RL_HWREV_8101		0x74c00000
 #define RL_HWREV_8100		0x78800000
+#define RL_HWREV_8169_8110SBL	0x7cc00000
 
 #define RL_TXDMA_16BYTES	0x00000000
 #define RL_TXDMA_32BYTES	0x00000100
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

	I couldn't fix mii phy issue.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
re0: <RealTek 8169 Gigabit Ethernet> port 0x3100-0x31ff mem 0xb0103000-0xb01031ff irq 22 at device 0.0 on cardbus0
re0: reset never completed!
re0: MII without any phy!
device_attach: re0 attach returned 6
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

	How do I fix this issue?  What I should report?