Hello, does anyone have a hint/patch for the following problem : I have several Tyan Tomcat S3950 MBs, most of them under 6-stable, on under 7-stable; work like a charm with X2-processors. I'm trying to install 7-stable on such a board with a X4-proc and for now no luck : - bios updated to latest 2.0c-beta (idem for OK working 7-stable with X2 proc) - straight boot just gives : GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=000000000009f000 SMAP type=02 base=000000000009f000 len=0000000000001000 SMAP type=02 base=00000000000e0000 len=0000000000020000 SMAP type=01 base=0000000000100000 len=00000000efef0000 SMAP type=03 base=00000000efff0000 len=000000000000e000 SMAP type=04 base=00000000efffe000 len=0000000000002000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fec01000 len=0000000000001000 SMAP type=02 base=00000000fec02000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=01 base=0000000100000000 len=0000000010000000 and then hangs (but I can eject the CD) - booting with 'hint.acpi.0.disabled=0' gives (first 7-stable then 8-snapshot-mai ) SMAP type=01 base=0000000000000000 len=000000000009f000 SMAP type=02 base=000000000009f000 len=0000000000001000 SMAP type=02 base=00000000000e0000 len=0000000000020000 SMAP type=01 base=0000000000100000 len=00000000efef0000 SMAP type=03 base=00000000efff0000 len=000000000000e000 SMAP type=04 base=00000000efffe000 len=0000000000002000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fec01000 len=0000000000001000 SMAP type=02 base=00000000fec02000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=01 base=0000000100000000 len=0000000010000000 Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-STABLE #0: Sat May 24 16:20:28 CEST 2008 toor_at_calenture:/usr/obj/files/bsd/src7/sys/S3950 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff807de000. Preloaded elf obj module "/boot/kernel/k8temp.ko" at 0xffffffff807de1f8. Calibrating clock(s) ... i8254 clock: 1193355 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2394031529 Hz CPU: AMD Phenom(tm) 9750 Quad-Core Processor (2394.03-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x100f23 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,<b23>> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,<b26>,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,<b5>,<b6>,<b7>,Prefetch,<b9>,<b10>> Cores per package: 4 L1 2MB data TLB: 48 entries, fully associative L1 2MB instruction TLB: 16 entries, fully associative L1 4KB data TLB: 48 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB data TLB: 128 entries, 2-way associative L2 2MB instruction TLB: 0 entries, 2-way associative L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative usable memory = 4286242816 (4087 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x00000000008dc000 - 0x00000000e801dfff, 3883147264 bytes (948034 pages) 0x0000000100000000 - 0x000000010ffeffff, 268369920 bytes (65520 pages) avail memory = 4140744704 (3948 MB) ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 nfslock: pseudo-device random: <entropy source, Software, Yarrow> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> io: <I/O> null: <null device, zero device> cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1166, dev=0x0036, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0205, revid=0x00 domain=0, bus=0, slot=2, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0214, revid=0x00 domain=0, bus=0, slot=2, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled found-> vendor=0x1166, dev=0x0234, revid=0x00 domain=0, bus=0, slot=2, func=2 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff6b4000, size 12, enabled map[14]: type I/O Port, range 32, base 0xd800, size 8, enabled found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff6b5000, size 12, enabled map[14]: type I/O Port, range 32, base 0xe000, size 8, enabled found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xff6b6000, size 12, enabled map[14]: type I/O Port, range 32, base 0xe400, size 8, enabled found-> vendor=0x8086, dev=0x1076, revid=0x05 domain=0, bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff660000, size 17, enabled map[14]: type Memory, range 32, base 0xff640000, size 17, enabled map[18]: type I/O Port, range 32, base 0xe800, size 6, enabled found-> vendor=0x8086, dev=0x1076, revid=0x05 domain=0, bus=0, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff600000, size 17, enabled map[14]: type Memory, range 32, base 0xff5e0000, size 17, enabled map[18]: type I/O Port, range 32, base 0xe880, size 6, enabled found-> vendor=0x18ca, dev=0x0020, revid=0x00 domain=0, bus=0, slot=6, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xf8000000, size 26, enabled map[14]: type Memory, range 32, base 0xff6c0000, size 18, enabled map[18]: type I/O Port, range 32, base 0xec00, size 7, enabled found-> vendor=0x1022, dev=0x1200, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1201, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1202, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1203, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1204, revid=0x00 domain=0, bus=0, slot=24, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 2 pcib1: I/O decode 0x9000-0xcfff pcib1: memory decode 0xff000000-0xff3fffff pcib1: prefetched decode 0xf6a00000-0xf6afffff pci1: <PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1166, dev=0x0104, revid=0xc0 domain=0, bus=1, slot=13, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0017, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns) found-> vendor=0x1166, dev=0x024a, revid=0x00 domain=0, bus=1, slot=14, func=0 class=01-04-05, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0xc080, size 3, enabled pcib1: requested I/O range 0xc080-0xc087: in range map[14]: type I/O Port, range 32, base 0xc000, size 2, enabled pcib1: requested I/O range 0xc000-0xc003: in range map[18]: type I/O Port, range 32, base 0xbc00, size 3, enabled pcib1: requested I/O range 0xbc00-0xbc07: in range map[1c]: type I/O Port, range 32, base 0xb880, size 2, enabled pcib1: requested I/O range 0xb880-0xb883: in range map[20]: type I/O Port, range 32, base 0xb800, size 5, enabled pcib1: requested I/O range 0xb800-0xb81f: in range map[24]: type Memory, range 32, base 0xff3fe000, size 13, enabled pcib1: requested memory range 0xff3fe000-0xff3fffff: good pcib2: <PCI-PCI bridge> at device 13.0 on pci1 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x9000-0xafff pcib2: memory decode 0xff000000-0xff2fffff pcib2: prefetched decode 0xf6a00000-0xf6afffff pci2: <PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x9005, dev=0x801d, revid=0x10 domain=0, bus=2, slot=6, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0430, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type I/O Port, range 32, base 0xa000, size 8, enabled pcib2: requested I/O range 0xa000-0xa0ff: in range pcib1: requested I/O range 0xa000-0xa0ff: in range map[14]: type Memory, range 64, base 0xff2fc000, size 13, enabled pcib2: requested memory range 0xff2fc000-0xff2fdfff: good pcib1: requested memory range 0xff2fc000-0xff2fdfff: good map[1c]: type I/O Port, range 32, base 0x9800, size 8, enabled pcib2: requested I/O range 0x9800-0x98ff: in range pcib1: requested I/O range 0x9800-0x98ff: in range found-> vendor=0x9005, dev=0x801d, revid=0x10 domain=0, bus=2, slot=6, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0430, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type I/O Port, range 32, base 0xa800, size 8, enabled pcib2: requested I/O range 0xa800-0xa8ff: in range pcib1: requested I/O range 0xa800-0xa8ff: in range map[14]: type Memory, range 64, base 0xff2fe000, size 13, enabled pcib2: requested memory range 0xff2fe000-0xff2fffff: good pcib1: requested memory range 0xff2fe000-0xff2fffff: good map[1c]: type I/O Port, range 32, base 0xa400, size 8, enabled pcib2: requested I/O range 0xa400-0xa4ff: in range pcib1: requested I/O range 0xa400-0xa4ff: in range ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0xa000-0xa0ff,0x9800-0x98ff mem 0xff2fc000-0xff2fdfff irq 9 at device 6.0 on pci2 ahd0: Defaulting to MEMIO on ahd0: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xff2fc000 ahd0: Enabling 39Bit Addressing ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful ahd0: Reading SEEPROM...done. ahd0: STPWLEVEL is on ahd0: Manual Primary Termination ahd0: Manual Secondary Termination ahd0: Primary High byte termination Enabled ahd0: Primary Low byte termination Enabled ahd0: Secondary High byte termination Disabled ahd0: Secondary Low byte termination Disabled ahd0: Downloading Sequencer Program... 697 instructions downloaded ahd0: Features 0x3c101, Bugs 0x740002, Flags 0x143f1 device_attach: ahd0 attach returned 12 ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0xa800-0xa8ff,0xa400-0xa4ff mem 0xff2fe000-0xff2fffff irq 11 at device 6.1 on pci2 ahd1: Defaulting to MEMIO on ahd1: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xff2fe000 ahd1: Enabling 39Bit Addressing ahd1: Reading VPD from SEEPROM...ahd1: VPD parsing successful ahd1: Reading SEEPROM...done. ahd1: STPWLEVEL is on ahd1: Manual Primary Termination ahd1: Manual Secondary Termination ahd1: Primary High byte termination Enabled ahd1: Primary Low byte termination Enabled ahd1: Secondary High byte termination Disabled ahd1: Secondary Low byte termination Disabled ahd1: Downloading Sequencer Program... 697 instructions downloaded ahd1: Features 0x3c101, Bugs 0x740002, Flags 0x143f0 device_attach: ahd1 attach returned 12 atapci0: <ServerWorks HT1000 SATA150 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb81f mem 0xff3fe000-0xff3fffff irq 11 at device 14.0 on pci1 atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800 atapci0: unable to map interrupt device_attach: atapci0 attach returned 6 atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=02 ostat0=ff ostat1=50 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=00 stat1=00 devices=0x8<ATAPI_SLAVE> ata0: unable to allocate interrupt device_attach: ata0 attach returned 6 ata1: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: unable to allocate interrupt device_attach: ata1 attach returned 6 isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, USB> at device 3.0 (no driver attached) pci0: <serial bus, USB> at device 3.1 (no driver attached) pci0: <serial bus, USB> at device 3.2 (no driver attached) pci0: <network, ethernet> at device 4.0 (no driver attached) pci0: <network, ethernet> at device 5.0 (no driver attached) vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xf8000000-0xfbffffff,0xff6c0000-0xff6fffff at device 6.0 on pci0 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: unable to allocate IRQ psm0: unable to allocate IRQ fdc0: cannot reserve interrupt line fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 238312 -> 100000 procfs registered linprocfs registered linsysfs registered Timecounter "TSC" frequency 2394031529 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached ATA PseudoRAID loaded Trying to mount root from ufs:/dev/da0s1a Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:da0s1a ? List valid disk boot devices <empty line> Abort manual input mountroot> GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=000000000009f000 SMAP type=02 base=000000000009f000 len=0000000000001000 SMAP type=02 base=00000000000e0000 len=0000000000020000 SMAP type=01 base=0000000000100000 len=00000000efef0000 SMAP type=03 base=00000000efff0000 len=000000000000e000 SMAP type=04 base=00000000efffe000 len=0000000000002000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fec01000 len=0000000000001000 SMAP type=02 base=00000000fec02000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=01 base=0000000100000000 len=0000000010000000 Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT-200805 #0: Mon May 12 12:30:36 UTC 2008 root_at_mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff810fa000. Preloaded mfs_root "/boot/mfsroot" at 0xffffffff810fa1f8. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2394037825 Hz CPU: AMD Phenom(tm) 9750 Quad-Core Processor (2394.04-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x100f23 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,<b5>,<b6>,<b7>,Prefetch,<b9>,<b10>> Cores per package: 4 L1 2MB data TLB: 48 entries, fully associative L1 2MB instruction TLB: 16 entries, fully associative L1 4KB data TLB: 48 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB data TLB: 128 entries, 2-way associative L2 2MB instruction TLB: 0 entries, 2-way associative L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative usable memory = 4276711424 (4078 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x00000000011f3000 - 0x00000000e887bfff, 3882389504 bytes (947849 pages) 0x0000000100000000 - 0x000000010ffeffff, 268369920 bytes (65520 pages) avail memory = 4140191744 (3948 MB) WARNING: Non-uniform processors. WARNING: Using suboptimal topology. ULE: setup cpu 0 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> io: <I/O> null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May 12 2008 12:30:25) pcib0: <Host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1166, dev=0x0036, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0205, revid=0x00 domain=0, bus=0, slot=2, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0214, revid=0x00 domain=0, bus=0, slot=2, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled found-> vendor=0x1166, dev=0x0234, revid=0x00 domain=0, bus=0, slot=2, func=2 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff6b4000, size 12, enabled map[14]: type I/O Port, range 32, base 0xd800, size 8, enabled found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff6b5000, size 12, enabled map[14]: type I/O Port, range 32, base 0xe000, size 8, enabled found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xff6b6000, size 12, enabled map[14]: type I/O Port, range 32, base 0xe400, size 8, enabled found-> vendor=0x8086, dev=0x1076, revid=0x05 domain=0, bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff660000, size 17, enabled map[14]: type Memory, range 32, base 0xff640000, size 17, enabled map[18]: type I/O Port, range 32, base 0xe800, size 6, enabled found-> vendor=0x8086, dev=0x1076, revid=0x05 domain=0, bus=0, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff600000, size 17, enabled map[14]: type Memory, range 32, base 0xff5e0000, size 17, enabled map[18]: type I/O Port, range 32, base 0xe880, size 6, enabled found-> vendor=0x18ca, dev=0x0020, revid=0x00 domain=0, bus=0, slot=6, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xf8000000, size 26, enabled map[14]: type Memory, range 32, base 0xff6c0000, size 18, enabled map[18]: type I/O Port, range 32, base 0xec00, size 7, enabled found-> vendor=0x1022, dev=0x1200, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1201, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1202, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1203, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1204, revid=0x00 domain=0, bus=0, slot=24, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 2 pcib1: I/O decode 0x9000-0xcfff pcib1: memory decode 0xff000000-0xff3fffff pcib1: prefetched decode 0xf6a00000-0xf6afffff pci1: <PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1166, dev=0x0104, revid=0xc0 domain=0, bus=1, slot=13, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0017, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns) found-> vendor=0x1166, dev=0x024a, revid=0x00 domain=0, bus=1, slot=14, func=0 class=01-04-05, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0xc080, size 3, enabled pcib1: requested I/O range 0xc080-0xc087: in range map[14]: type I/O Port, range 32, base 0xc000, size 2, enabled pcib1: requested I/O range 0xc000-0xc003: in range map[18]: type I/O Port, range 32, base 0xbc00, size 3, enabled pcib1: requested I/O range 0xbc00-0xbc07: in range map[1c]: type I/O Port, range 32, base 0xb880, size 2, enabled pcib1: requested I/O range 0xb880-0xb883: in range map[20]: type I/O Port, range 32, base 0xb800, size 5, enabled pcib1: requested I/O range 0xb800-0xb81f: in range map[24]: type Memory, range 32, base 0xff3fe000, size 13, enabled pcib1: requested memory range 0xff3fe000-0xff3fffff: good pcib2: <PCI-PCI bridge> at device 13.0 on pci1 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x9000-0xafff pcib2: memory decode 0xff000000-0xff2fffff pcib2: prefetched decode 0xf6a00000-0xf6afffff pci2: <PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x9005, dev=0x801d, revid=0x10 domain=0, bus=2, slot=6, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0430, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type I/O Port, range 32, base 0xa000, size 8, enabled pcib2: requested I/O range 0xa000-0xa0ff: in range pcib1: requested I/O range 0xa000-0xa0ff: in range map[14]: type Memory, range 64, base 0xff2fc000, size 13, enabled pcib2: requested memory range 0xff2fc000-0xff2fdfff: good pcib1: requested memory range 0xff2fc000-0xff2fdfff: good map[1c]: type I/O Port, range 32, base 0x9800, size 8, enabled pcib2: requested I/O range 0x9800-0x98ff: in range pcib1: requested I/O range 0x9800-0x98ff: in range found-> vendor=0x9005, dev=0x801d, revid=0x10 domain=0, bus=2, slot=6, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0430, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type I/O Port, range 32, base 0xa800, size 8, enabled pcib2: requested I/O range 0xa800-0xa8ff: in range pcib1: requested I/O range 0xa800-0xa8ff: in range map[14]: type Memory, range 64, base 0xff2fe000, size 13, enabled pcib2: requested memory range 0xff2fe000-0xff2fffff: good pcib1: requested memory range 0xff2fe000-0xff2fffff: good map[1c]: type I/O Port, range 32, base 0xa400, size 8, enabled pcib2: requested I/O range 0xa400-0xa4ff: in range pcib1: requested I/O range 0xa400-0xa4ff: in range ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0xa000-0xa0ff,0x9800-0x98ff mem 0xff2fc000-0xff2fdfff irq 9 at device 6.0 on pci2 ahd0: Defaulting to MEMIO on ahd0: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xff2fc000 ahd0: Enabling 39Bit Addressing ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful ahd0: Reading SEEPROM...done. ahd0: STPWLEVEL is on ahd0: Manual Primary Termination ahd0: Manual Secondary Termination ahd0: Primary High byte termination Enabled ahd0: Primary Low byte termination Enabled ahd0: Secondary High byte termination Disabled ahd0: Secondary Low byte termination Disabled ahd0: Downloading Sequencer Program... 697 instructions downloaded ahd0: Features 0x3c101, Bugs 0x740002, Flags 0x143f1 device_attach: ahd0 attach returned 12 ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0xa800-0xa8ff,0xa400-0xa4ff mem 0xff2fe000-0xff2fffff irq 11 at device 6.1 on pci2 ahd1: Defaulting to MEMIO on ahd1: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xff2fe000 ahd1: Enabling 39Bit Addressing ahd1: Reading VPD from SEEPROM...ahd1: VPD parsing successful ahd1: Reading SEEPROM...done. ahd1: STPWLEVEL is on ahd1: Manual Primary Termination ahd1: Manual Secondary Termination ahd1: Primary High byte termination Enabled ahd1: Primary Low byte termination Enabled ahd1: Secondary High byte termination Disabled ahd1: Secondary Low byte termination Disabled ahd1: Downloading Sequencer Program... 697 instructions downloaded ahd1: Features 0x3c101, Bugs 0x740002, Flags 0x143f0 device_attach: ahd1 attach returned 12 atapci0: <ServerWorks HT1000 SATA150 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb81f mem 0xff3fe000-0xff3fffff irq 11 at device 14.0 on pci1 atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800 atapci0: unable to map interrupt device_attach: atapci0 attach returned 6 atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=02 ostat0=ff ostat1=50 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=00 stat1=00 devices=0x20000 ata0: unable to allocate interrupt device_attach: ata0 attach returned 6 ata1: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: unable to allocate interrupt device_attach: ata1 attach returned 6 isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0xd800-0xd8ff mem 0xff6b4000-0xff6b4fff irq 10 at device 3.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff6b4000 ohci0: Could not allocate irq device_attach: ohci0 attach returned 6 ohci1: <OHCI (generic) USB controller> port 0xe000-0xe0ff mem 0xff6b5000-0xff6b5fff irq 10 at device 3.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff6b5000 ohci1: Could not allocate irq device_attach: ohci1 attach returned 6 ehci0: <EHCI (generic) USB 2.0 controller> port 0xe400-0xe4ff mem 0xff6b6000-0xff6b6fff irq 10 at device 3.2 on pci0 ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff6b6000 ehci0: Could not allocate irq device_attach: ehci0 attach returned 6 em0: <Intel(R) PRO/1000 Network Connection 6.9.0> port 0xe800-0xe83f mem 0xff660000-0xff67ffff,0xff640000-0xff65ffff irq 7 at device 4.0 on pci0 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xff660000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xe800 em0: Unable to allocate bus resource: interrupt device_attach: em0 attach returned 6 em1: <Intel(R) PRO/1000 Network Connection 6.9.0> port 0xe880-0xe8bf mem 0xff600000-0xff61ffff,0xff5e0000-0xff5fffff irq 5 at device 5.0 on pci0 em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xff600000 em1: Reserved 0x40 bytes for rid 0x18 type 4 at 0xe880 em1: Unable to allocate bus resource: interrupt device_attach: em1 attach returned 6 vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xf8000000-0xfbffffff,0xff6c0000-0xff6fffff at device 6.0 on pci0 cpu0 on motherboard ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: unable to allocate IRQ psm0: unable to allocate IRQ fdc0: cannot reserve interrupt line fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x4001 0x4011 0x4001 0x4001 sio0: irq maps: 0x4001 0x4011 0x4001 0x4001 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0x4001 0x4009 0x4001 0x4001 sio1: irq maps: 0x4001 0x4009 0x4001 0x4001 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 227951 -> 100000 procfs registered Timecounter "TSC" frequency 2394037825 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80cf8e68 ATA PseudoRAID loaded WARNING: WITNESS option enabled, expect reduced performance. lock order reversal: (sleepable after non-sleepable) 1st 0xffffff00023b6038 struct mount mtx (struct mount mtx) _at_ /usr/src/sys/kern/vfs_subr.c:343 2nd 0xffffff00023b6000 vfslock (vfslock) _at_ /usr/src/sys/kern/vfs_subr.c:370 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a witness_checkorder() at witness_checkorder+0x605 __lockmgr_args() at __lockmgr_args+0xc9b vfs_busy() at vfs_busy+0xe7 vfs_mount_alloc() at vfs_mount_alloc+0x8b vfs_mountroot() at vfs_mountroot+0x241 start_init() at start_init+0x62 fork_exit() at fork_exit+0x12a fork_trampoline() at fork_trampoline+0xe --- trap 0, rip = 0, rsp = 0xffffffff81234d30, rbp = 0 --- lock order reversal: (sleepable after non-sleepable) 1st 0xffffff000235fd00 vnode interlock (vnode interlock) _at_ /usr/src/sys/fs/devfs/devfs_vnops.c:197 2nd 0xffffff000235fcc8 devfs (devfs) _at_ /usr/src/sys/kern/vfs_subr.c:2044 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a witness_checkorder() at witness_checkorder+0x605 __lockmgr_args() at __lockmgr_args+0x508 vop_stdlock() at vop_stdlock+0x39 VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b _vn_lock() at _vn_lock+0x47 vget() at vget+0x7b devfs_allocv() at devfs_allocv+0x11d devfs_root() at devfs_root+0x52 set_rootvnode() at set_rootvnode+0x30 vfs_mountroot() at vfs_mountroot+0x301 start_init() at start_init+0x62 fork_exit() at fork_exit+0x12a fork_trampoline() at fork_trampoline+0xe --- trap 0, rip = 0, rsp = 0xffffffff81234d30, rbp = 0 --- lock order reversal: 1st 0xffffff000235fcc8 devfs (devfs) _at_ /usr/src/sys/kern/vfs_subr.c:2044 2nd 0xffffff0002364e20 devfsmount (devfsmount) _at_ /usr/src/sys/fs/devfs/devfs_vnops.c:201 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a witness_checkorder() at witness_checkorder+0x605 _sx_xlock() at _sx_xlock+0x52 devfs_allocv() at devfs_allocv+0x136 devfs_root() at devfs_root+0x52 set_rootvnode() at set_rootvnode+0x30 vfs_mountroot() at vfs_mountroot+0x301 start_init() at start_init+0x62 fork_exit() at fork_exit+0x12a fork_trampoline() at fork_trampoline+0xe --- trap 0, rip = 0, rsp = 0xffffffff81234d30, rbp = 0 --- Trying to mount root from ufs:/dev/md0 warning: no time-of-day clock registered, system time will not be set accurately lock order reversal: (sleepable after non-sleepable) 1st 0xffffff000235f750 bufobj interlock (bufobj interlock) _at_ /usr/src/sys/kern/vfs_bio.c:2442 2nd 0xffffffff9a5a4070 bufwait (bufwait) _at_ /usr/src/sys/kern/vfs_bio.c:2456 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a witness_checkorder() at witness_checkorder+0x605 __lockmgr_args() at __lockmgr_args+0x508 getblk() at getblk+0xe3 breadn() at breadn+0x3f bread() at bread+0x1e ffs_blkatoff() at ffs_blkatoff+0x61 ufs_lookup() at ufs_lookup+0x5c4 vfs_cache_lookup() at vfs_cache_lookup+0xf8 VOP_LOOKUP_APV() at VOP_LOOKUP_APV+0x95 lookup() at lookup+0x4b3 namei() at namei+0x43f kern_unlinkat() at kern_unlinkat+0x9d vfs_mountroot_try() at vfs_mountroot_try+0x40e vfs_mountroot() at vfs_mountroot+0x40e start_init() at start_init+0x62 fork_exit() at fork_exit+0x12a fork_trampoline() at fork_trampoline+0xe --- trap 0, rip = 0, rsp = 0xffffffff81234d30, rbp = 0 --- start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /rescue/init start_init: trying /stand/sysinstall An interesting piste might be the message from the 8-current boot saying : WARNING: Non-uniform processors. WARNING: Using suboptimal topology. Thanx a lot in advance for any help. ArnoReceived on Mon May 26 2008 - 10:36:43 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:31 UTC