Re: Unconditional 30s boot delay.

From: Ian FREISLICH <ianf_at_clue.co.za>
Date: Wed, 28 May 2008 08:30:19 +0200
Ian FREISLICH wrote:
> Which is fine and well if routing runs *after* the DHCP request,
> but it doesn't it runs before devd is started so the default route
> from DHCP is never acquired and we wait... for 30s....
> 
> And this needs an "echo" after the "done" so that the next script's
> output lands up at the start of the next line.

Forgot to add this console log in support:

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        inet 127.0.0.1 netmask 0xff000000 
vr0: link state changed to UP
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=2808<VLAN_MTU,WOL_UCAST,WOL_MAGIC>
        ether 00:40:63:f4:22:7e
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
Additional routing options: IP gateway=YES.
Waiting 30s for an interface to come up: .............................Starting d
evd.
hw.acpi.cpu.cx_lowest: C1 -> C1
DHCPREQUEST on vr0 to 255.255.255.255 port 67
DHCPACK from 10.0.0.1
bound to 10.0.0.223 -- renewal in 216000 seconds.
Firewall rules loaded.

Ian

--
Ian Freislich
Received on Wed May 28 2008 - 04:31:10 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:31 UTC