> >If you could run usbdevs -v and then jot down the IDs you can add those > > to the top of u3g.c. You'll have to add a quirk like for other sierra > > devices that show up as mass storage and need to be kicked into modem > > mode. > > > >It pretends to be a mass storage device (with drivers on it) and after > >installation switches to modem mode. > > > >Or that's my guess. > > # usbdevs -v > Controller /dev/usb0: > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), > AMD(0x0000), rev 1.00 > port 1 powered > port 2 addr 2: full speed, power 100 mA, config 1, USB MMC > Storage(0x0fff), Sierra Wireless(0x1199), rev 0.00 > port 3 powered > port 4 powered > Controller /dev/usb1: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > AMD(0x0000), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > > It looks like its already there in the drivers. Is it possible the > mini-pci express card is conflicting with the USB of the Alix board ? Well, it should change to modem mode, so perhaps the sierra_init function is not correct yet. I'll have to check that out. nickReceived on Wed Nov 05 2008 - 17:05:17 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:37 UTC