Re: CFT: Realtek 8187L wireless USB driver - urtw(4)

On Friday 07 November 2008 09:42:12 Aleksey K. wrote:
> >Dear all,
> >
> >This driver supports 8187L which is one of Realtek's 8187x series and
> >I'm looking for testers who have this device.  :-)  With lack of H/W I
> >can't add codes for 8187/8187B devices that AFAIK they can share a lot
> >of codes and can be supported without modifying many part of codes.
> >

[ snip]

> >
> >regards,
> >Weongyo Jeong
>
> Hi. I have netbook MSI Wind U90X with wi-fi module - Realtek 8187SE.
> You plan to write the driver for this card? I could help with driver
> testing...
>
> Best regards,
> Kashin Aleksey.
>

I have MSI Wind U100 with Realtek 8187SE. From pciconf -lv:

none0_at_pci0:2:0:0:       class=0x028000 card=0x68941462 chip=0x819910ec 
rev=0x22 hdr=0x00
    vendor     = 'Realtek Semiconductor'
    class      = network

Some more details from lspci -vvv:

02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Unknown device 
8199 (rev 22)
        Subsystem: Micro-Star International Co., Ltd. Unknown device 6894
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: I/O ports at b000
        Region 1: Memory at dfc00000 (32-bit, non-prefetchable)
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <128ns, 
L1 <2us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 <512ns, L1 <64us
                        ClockPM+ Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-

If you think your driver is usable here, i can test it some time later, I 
assume you work with 8-CURRENT (as this is on -current list, anyway).

Regards,
Milan