Re: Setting up atheros (168c:001c) wireless NIC in FreeBSD

Hi all,

I've just built and installed recently checked out kernel and world. But
this time, wpa_supplicant is able to detect my access point and
associate it for a moment. But thats it.

----8<----8<----
% ifconfig wlan0
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:1f:3a:1a:50:b3
        inet6 fe80::21f:3aff:fe1a:50b3%wlan0 prefixlen 64 scopeid 0x4 
        media: IEEE 802.11 Wireless Ethernet DS/1Mbps mode 11g
        status: associated
        ssid 18-B-PARVATIYA channel 6 (2437 Mhz 11g) bssid 00:1e:2a:76:f4:60
        regdomain 103 indoor ecm authmode WPA2/802.11i privacy ON
        deftxkey UNDEF txpower 16 bmiss 7 scanvalid 450 bgscan bgscanintvl 300
        bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS wme burst
        roaming MANUAL
---->8---->8----

Though it shows associated but I'm not able to ping any other nodes on
my wireless network. OpenBSD pf is disabled on my notebook during this
testing. Following is the link to the output of 'wpa_supplicant -dd
-Dbsd -iwlan0 -c/etc/wpa_supplicant.conf':

http://pastebin.ca/1208660

Thanks
Ashish Shukla
-- 
()  ascii ribbon campaign - against HTML e-mail
/\  www.asciiribbon.org   - against proprietary attachments
·-- ·- ···· ·--- ·- ···- ·- ·--·-· --· -- ·- ·· ·-·· ·-·-·- -·-· --- --
% dig +short cname cdac.in _at_::1
ms.gov.in