On 9/23/08, Paul B. Mahol <onemda_at_gmail.com> wrote: > On 9/22/08, Ashish Shukla ************ *************** > <wahjava.ml_at_gmail.com> wrote: >> Hi all, >> >> I've just built and installed recently checked out kernel and world. But >> this time, wpa_supplicant is able to detect my access point and >> associate it for a moment. But thats it. >> >> ----8<----8<---- >> % ifconfig wlan0 >> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >> 1500 >> ether 00:1f:3a:1a:50:b3 >> inet6 fe80::21f:3aff:fe1a:50b3%wlan0 prefixlen 64 scopeid 0x4 >> media: IEEE 802.11 Wireless Ethernet DS/1Mbps mode 11g >> status: associated >> ssid 18-B-PARVATIYA channel 6 (2437 Mhz 11g) bssid >> 00:1e:2a:76:f4:60 >> regdomain 103 indoor ecm authmode WPA2/802.11i privacy ON >> deftxkey UNDEF txpower 16 bmiss 7 scanvalid 450 bgscan bgscanintvl >> 300 >> bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS wme burst >> roaming MANUAL >> ---->8---->8---- >> >> Though it shows associated but I'm not able to ping any other nodes on > > Why? You got some errors when using ping(1)? > > ifconfig output doesnt have inet, netmask and broadcast configured so > pinging will not work anyway. > except if you use only ip6Received on Mon Sep 22 2008 - 20:12:39 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:35 UTC