On Wednesday 08 April 2009, Renato Botelho wrote: > On Wed, Apr 8, 2009 at 3:16 AM, Hans Petter Selasky <hselasky_at_c2i.net> wrote: > > On Tuesday 07 April 2009, Renato Botelho wrote: > >> When I plug a gradiente cell phone on my USB I got this: > >> > >> Apr 7 15:33:01 botelhor root: Unknown USB device: vendor 0x0e8d > >> product 0x0002 bus uhub0 > >> Apr 7 15:33:01 botelhor kernel: ugen0.2: <EZZE-E800GF> at usbus0 > >> Apr 7 15:33:01 botelhor kernel: umass0: <EZZE -Storage> on usbus0 > >> Apr 7 15:33:01 botelhor kernel: umass0: SCSI over Bulk-Only; quirks = > >> 0x0000 Apr 7 15:33:02 botelhor kernel: umass0:0:0:-1: Attached to > >> scbus0 Apr 7 15:33:02 botelhor kernel: da0 at umass-sim0 bus 0 target 0 > >> lun 0 Apr 7 15:33:02 botelhor kernel: da0: <GF-500 > Removable Direct > >> Access SCSI-0 device > >> Apr 7 15:33:02 botelhor kernel: da0: 1.000MB/s transfers > >> Apr 7 15:33:02 botelhor kernel: da0: 982MB (2012160 512 byte sectors: > >> 64H 32S/T 982C) > >> Apr 7 15:33:02 botelhor kernel: da1 at umass-sim0 bus 0 target 0 lun 1 > >> Apr 7 15:33:02 botelhor kernel: da1: <GF-500 > Removable Direct > >> Access SCSI-0 device > >> Apr 7 15:33:02 botelhor kernel: da1: 1.000MB/s transfers > >> Apr 7 15:33:02 botelhor kernel: da1: 1MB (3668 512 byte sectors: 64H > >> 32S/T 1C) Apr 7 15:33:02 botelhor kernel: GEOM: da0: partition 1 does > >> not start on a track boundary. > >> Apr 7 15:33:02 botelhor kernel: GEOM: da0: partition 1 does not end > >> on a track boundary. > >> Apr 7 15:33:04 botelhor kernel: umass0: at uhub0, port 2, addr 2 > >> (disconnected) Apr 7 15:33:04 botelhor kernel: (da1:umass-sim0:0:0:1): > >> Synchronize cache failed, status == 0x3f, scsi status == 0x0 > >> Apr 7 15:33:04 botelhor kernel: (da0:umass-sim0:0:0:0): lost device > >> Apr 7 15:33:04 botelhor kernel: (da0:umass-sim0:0:0:0): removing device > >> entry Apr 7 15:33:04 botelhor kernel: (da1:umass-sim0:0:0:1): lost > >> device Apr 7 15:33:04 botelhor kernel: (da1:umass-sim0:0:0:1): removing > >> device entry Apr 7 15:33:04 botelhor kernel: ugen0.2: <EZZE-E800GF> at > >> usbus0 (disconnected) > >> > >> Using 8.0-CURRENT r190550 > >> > >> I've tried on all usb ports, and have the same. Any idea? > > > > Your device probably needs the no synchronize cache quirk. See quirk > > table in /sys/dev/usb/storage/umass.c . > > Hans, > > I got it and can make tests here, but, i cannot find EZZE-E800GF or nothing > related on usbdevs, I don't know where this description came from. Could > you point me to the right place? > usbconfig dump_device_desc Look for idVendor and idProduct --HPSReceived on Wed Apr 08 2009 - 10:36:30 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:45 UTC