On Wed, Apr 8, 2009 at 5:47 PM, Hans Petter Selasky <hselasky_at_c2i.net> wrote: > On Wednesday 08 April 2009, Renato Botelho wrote: >> umass0: SCSI over Bulk-Only; quirks = 0x0000 > > > umass0: SCSI over Bulk-Only; quirks = 0x0000 > > If the quirks print is still zero, then your patch is not correct, or you have > not recompiled and installed the patched files! Sorry, my fault, I made a mistake on product ID, but it still doesn't work, here is the new dmesg: ugen1.2: <EZZE-E800GF> at usbus1 umass0: <EZZE -Storage> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:0:0:-1: Attached to scbus0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <GF-500 > Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 982MB (2012160 512 byte sectors: 64H 32S/T 982C) da1 at umass-sim0 bus 0 target 0 lun 1 da1: <GF-500 > Removable Direct Access SCSI-0 device da1: 1.000MB/s transfers da1: 1MB (3668 512 byte sectors: 64H 32S/T 1C) GEOM: da0: partition 1 does not start on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. ugen1.2: <EZZE-E800GF> at usbus1 (disconnected) umass0: at uhub1, port 1, addr 2 (disconnected) (da1:umass-sim0:0:0:1): Synchronize cache failed, status == 0x3f, scsi status == 0x0 (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry (da1:umass-sim0:0:0:1): lost device (da1:umass-sim0:0:0:1): removing device entry -- Renato BotelhoReceived on Thu Apr 09 2009 - 09:32:00 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:46 UTC