Re: NMI ISA 2c, EISA ff

From: Alex Keda <admin_at_lissyara.su>
Date: Tue, 14 Apr 2009 23:11:51 +0400
Andriy Gapon пишет:
> on 14/04/2009 08:07 Alex Keda said the following:
>> I try install FreBSD; boot from USB hard drive on HP 2133 (laptop)
>> Boot not success:
>>
>> agp0: <VIA 3364 (P4M900) host to PCI bridge> on host0
>> agp0: aperture size is 128M
>> NMI ISA 2c, EISA ff
> 
> I am not an expert here, but I had the above message on flaky hardware.
> But, again, the same symptoms do not mean the same cause.
I boot from flash drive with custom kernel (7.1 based) and copy CURRENT 
to hard drive
It not boot with same error


> 
>> NMI ... going to debugger
>> [thread pid0 tid 100000 ]
>> Stopped at pmap_remove+0x158: testl %eax,%eax
>> db>
>>
>> If I do not unplug hard drive - reboot with 2-3 seconds
>> If unplug - not reboot, but, 'db>' go to down - kind of press enter
>> (~10-20 seconds period)
>> System - i386, GENERIC, from yesterday sources
> 
> 
Received on Tue Apr 14 2009 - 17:11:31 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:46 UTC