On i386 8.0-current, with intel i845 chipset, with Option "AccelMethod" "UXA" in device section of xorg.conf I get this error: error: [drm:pid1104:i915_irq_emit] *ERROR* i915_irq_emit called without lock held and these 3 lines at the bottom of the Xorg.0.log: (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) intel(0): Existing errors found in hardware state. _fence_emit_internal: drm_i915_irq_emit: 22 If I don't use UXA I get a warning in the X log file that it must be enabled for DRI2. Should I submit a PR? xorg.conf, dmesg, and Xorg.0.log are below. many thanks anton ******************* dmesg ******************* Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Thu Apr 30 13:16:01 BST 2009 mexas_at_mech-Anton240.men.bris.ac.uk:/usr/obj/usr/src/sys/EDGE WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.10-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x400<CNXT-ID> real memory = 536870912 (512 MB) avail memory = 507289600 (483 MB) acpi0: <INTEL D845GRG2> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 1f700000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem 0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq 11 at device 2.0 on pci0 agp0: <Intel 82845M (845M GMCH) SVGA controller> on vgapci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M drm0: <Intel i845G GMCH> on vgapci0 vgapci0: child drm0 requested pci_enable_busmaster info: [drm] AGP at 0xf0000000 128MB info: [drm] Initialized i915 1.6.0 20080730 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 11 at device 29.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x0f30 usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 3 at device 29.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x0f30 usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 5 at device 29.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x0f30 usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xffa7fc00-0xffa7ffff irq 9 at device 29.7 on pci0 ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xff8ff000-0xff8fffff irq 10 at device 0.0 on pci1 ahc0: [ITHREAD] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xdc00-0xdc3f mem 0xff8fe000-0xff8fefff irq 11 at device 8.0 on pci1 miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:07:e9:e7:41:dc fxp0: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) acpi_button0: <Sleep Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xcb800-0xcbfff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2400101316 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle (probe0:ahc0:0:0:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe0:ahc0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe1:ahc0:0:1:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe1:ahc0:0:1:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe2:ahc0:0:2:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe2:ahc0:0:2:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe3:ahc0:0:3:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe3:ahc0:0:3:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe4:ahc0:0:4:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe4:ahc0:0:4:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe5:ahc0:0:5:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe5:ahc0:0:5:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe6:ahc0:0:6:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe6:ahc0:0:6:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe7:ahc0:0:8:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe7:ahc0:0:8:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe8:ahc0:0:9:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe8:ahc0:0:9:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe9:ahc0:0:10:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe9:ahc0:0:10:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe10:ahc0:0:11:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe10:ahc0:0:11:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe11:ahc0:0:12:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe11:ahc0:0:12:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe12:ahc0:0:13:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe12:ahc0:0:13:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe13:ahc0:0:14:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe13:ahc0:0:14:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe14:ahc0:0:15:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe14:ahc0:0:15:0): INQUIRY. CDB: 12 0 0 0 24 0 usbus3: 480Mbps High Speed USB v2.0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 ad0: 76319MB <WDC WD800BB-00CAA1 17.07W17> at ata0-master UDMA100 ugen3.1: <Intel> at usbus3 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen0.1: <Intel> at usbus0 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 acd0: DVDROM <DVD-ROM DDU1621/VER S2.9> at ata1-master UDMA33 acd1: CDRW <SONY CD-RW CRX210E1/2YS2> at ata1-slave UDMA33 uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s). GEOM_LABEL: Label for provider ad0s1a is ufsid/48db6d0a9566784c. GEOM_LABEL: Label for provider ad0s1d is ufsid/48db6d0ec04acd6f. GEOM_LABEL: Label for provider ad0s1e is ufsid/48db6d0a1b5ea852. GEOM_LABEL: Label for provider ad0s1f is ufsid/48db6d0a9c3d25b3. uhub0: 6 ports with 6 removable, self powered WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ad0s1a GEOM_LABEL: Label ufsid/48db6d0a9566784c removed. GEOM_LABEL: Label for provider ad0s1a is ufsid/48db6d0a9566784c. GEOM_LABEL: Label ufsid/48db6d0a1b5ea852 removed. GEOM_LABEL: Label for provider ad0s1e is ufsid/48db6d0a1b5ea852. GEOM_LABEL: Label ufsid/48db6d0a9c3d25b3 removed. GEOM_LABEL: Label for provider ad0s1f is ufsid/48db6d0a9c3d25b3. GEOM_LABEL: Label ufsid/48db6d0ec04acd6f removed. GEOM_LABEL: Label for provider ad0s1d is ufsid/48db6d0ec04acd6f. GEOM_LABEL: Label ufsid/48db6d0a9566784c removed. GEOM_LABEL: Label ufsid/48db6d0a1b5ea852 removed. GEOM_LABEL: Label ufsid/48db6d0a9c3d25b3 removed. GEOM_LABEL: Label ufsid/48db6d0ec04acd6f removed. pid 1068 (Xorg), uid 0: exited on signal 11 (core dumped) drm0: [ITHREAD] error: [drm:pid1104:i915_irq_emit] *ERROR* i915_irq_emit called without lock held pid 1104 (Xorg), uid 0: exited on signal 6 (core dumped) error: [drm:pid1109:i915_irq_emit] *ERROR* i915_irq_emit called without lock held pid 1109 (Xorg), uid 0: exited on signal 6 (core dumped) ********************** xorg.conf ********************** Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Option "DontZap" "false" EndSection Section "Files" ModulePath "/usr/local/lib/xorg/modules" FontPath "/usr/local/lib/X11/fonts/misc/" FontPath "/usr/local/lib/X11/fonts/TTF/" FontPath "/usr/local/lib/X11/fonts/OTF" FontPath "/usr/local/lib/X11/fonts/Type1/" FontPath "/usr/local/lib/X11/fonts/100dpi/" FontPath "/usr/local/lib/X11/fonts/75dpi/" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "ColorKey" # <i> #Option "CacheLines" # <i> #Option "Dac6Bit" # [<bool>] #Option "DRI" # [<bool>] #Option "NoDDC" # [<bool>] #Option "ShowCache" # [<bool>] #Option "XvMCSurfaces" # <i> #Option "PageFlip" # [<bool>] Option "AccelMethod" "UXA" Identifier "Card0" Driver "intel" VendorName "Intel Corporation" BoardName "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection ***************************** Xorg.0.log ***************************** X.Org X Server 1.6.0 Release Date: 2009-2-25 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 8.0-CURRENT i386 Current Operating System: FreeBSD mech-Anton240.men.bris.ac.uk 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Thu Apr 30 13:16:01 BST 2009 mexas_at_mech-Anton240.men.bris.ac.uk:/usr/obj/usr/src/sys/EDGE i386 Build Date: 06 April 2009 10:59:19AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 30 13:40:14 2009 (++) Using config file: "xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) Option "DontZap" "false" (==) Automatically adding devices (==) Automatically enabling devices (**) FontPath set to: /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, built-ins (**) ModulePath set to "/usr/local/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x6a0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on freebsd (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (--) PCI:*(0_at_0:2:0) Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem _at_ 0xf0000000/134217728, 0xffa80000/524288, BIOS _at_ 0x????????/65536 (II) System resource ranges: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX disabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.6.3 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intelб╝ GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00_at_00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) resource ranges after probing: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/local/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "AccelMethod" "UXA" (II) intel(0): Integrated Graphics Chipset: Intel(R) 845G (--) intel(0): Chipset: "845G" (--) intel(0): Linear framebuffer at 0xF0000000 (--) intel(0): IO registers at addr 0xFFA80000 (**) intel(0): Using UXA for acceleration (II) intel(0): 1 display pipe available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Monitor0 (II) intel(0): I2C bus "DVODDC_D" initialized. (II) Loading sub module "sil164" (II) LoadModule: "sil164" (II) Loading /usr/local/lib/xorg/modules/drivers//sil164.so (II) Module sil164: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) Loading sub module "ch7xxx" (II) LoadModule: "ch7xxx" (II) Loading /usr/local/lib/xorg/modules/drivers//ch7xxx.so (II) Module ch7xxx: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) Loading sub module "ivch" (II) LoadModule: "ivch" (II) Loading /usr/local/lib/xorg/modules/drivers//ivch.so (II) Module ivch: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVOI2C_B" initialized. (II) Loading sub module "tfp410" (II) LoadModule: "tfp410" (II) Loading /usr/local/lib/xorg/modules/drivers//tfp410.so (II) Module tfp410: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): I2C bus "DVOI2C_B" removed. (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) Loading sub module "ch7017" (II) LoadModule: "ch7017" (II) Loading /usr/local/lib/xorg/modules/drivers//ch7017.so (II) Module ch7017: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVODDC_D" removed. (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): Resizable framebuffer: available (1 4) (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "_at__at__at_", prod id 0 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): EDID vendor "_at__at__at_", prod id 0 (II) intel(0): Output VGA connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output VGA using initial mode 1024x768 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): detected 128 kB GTT. (II) intel(0): detected 8060 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (**) intel(0): Display dimensions: (300, 230) mm (**) intel(0): DPI set to (86, 84) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/local/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 112640 total, 0 used (II) intel(0): I830CheckAvailableMemory: 450560 kB available drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 131072 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): Page Flipping disabled (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): xf86BindGARTMemory: bind key 9 at 0x007df000 (pgoffset 2015) (II) intel(0): xf86BindGARTMemory: bind key 10 at 0x00800000 (pgoffset 2048) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00024fff: HW cursors (20 kB) (II) intel(0): 0x00025000-0x00124fff: fake bufmgr (1024 kB) (II) intel(0): 0x007df000: end of stolen memory (II) intel(0): 0x007df000-0x007dffff: overlay registers (4 kB, 0x000000000cdc8000 physical ) (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) (II) intel(0): 0x08000000: end of aperture (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) intel(0): Existing errors found in hardware state. _fence_emit_internal: drm_i915_irq_emit: 22 -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 928 8233 Fax: +44 (0)117 929 4423Received on Thu Apr 30 2009 - 10:52:26 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:46 UTC