usb pen drive detection - still no joy

still no joy getting my corsair voyager detected works fine on laptop
(linux) I posted a month or so ago tried all the suggestions but no go

I have set hw.usb.ehci.no_hs=1 and the drive detects ok in usb1 mode
but isnt really that usable due to the speed



usb_alloc_device:1588: set address 4 failed (USB_ERR_TIMEOUT, ignored)
usb_alloc_device:1626: getting device descriptor at addr 4 failed,
USB_ERR_TIMEOUT!
usbd_req_re_enumerate:1539: addr=4, set address failed!
(USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate:1553: getting device descriptor at addr 4
failed, USB_ERR_TIMEOUT!
usbd_req_re_enumerate:1539: addr=4, set address failed!
(USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate:1553: getting device descriptor at addr 4
failed, USB_ERR_TIMEOUT!
ugen4.4: <(null)> at usbus4 (disconnected)
uhub_reattach_port:440: could not allocate new device!
(root_at_X)-(21:59:13)-(~) 0
$ usbconfig
ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen4.2: <product 0x6560 vendor 0x04b4> at usbus4, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=SAVE
ugen4.3: <USB KVM vendor 0x0d3d> at usbus4, cfg=0 md=HOST spd=LOW
(1.5Mbps) pwr=ON
(root_at_X)-(21:59:20)-(~) 0
$ pciconf -l -v | grep -i -A  4 usb
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci1_at_pci0:0:29:1:      class=0x0c0300 card=0x81791043 chip=0x27c98086
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci2_at_pci0:0:29:2:      class=0x0c0300 card=0x81791043 chip=0x27ca8086
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci3_at_pci0:0:29:3:      class=0x0c0300 card=0x81791043 chip=0x27cb8086
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
ehci0_at_pci0:0:29:7:      class=0x0c0320 card=0x81791043 chip=0x27cc8086
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
pcib3_at_pci0:0:30:0:      class=0x060401 card=0x81791043 chip=0x244e8086
rev=0xe1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub
Interface to PCI Bridge'
    class      = bridge

$ uname -a
FreeBSD carrera.snaffler.net 8.0-BETA2 FreeBSD 8.0-BETA2 #10: Mon Aug
3 05:16:53 BST 2009     root_at_X:/usr/obj/usr/src/sys/me  amd64


$ dmesg | grep -i "usb\|uhub"| grep irq | sort -u
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0xfe8f7c00-0xfe8f7fff irq 23 at device 29.7 on pci0
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc400-0xc41f
irq 23 at device 29.0 on pci0
uhci0: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 23 at
device 29.0 on pci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc480-0xc49f
irq 19 at device 29.1 on pci0
uhci1: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 19 at
device 29.1 on pci0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f
irq 18 at device 29.2 on pci0
uhci2: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 18 at
device 29.2 on pci0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc880-0xc89f
irq 16 at device 29.3 on pci0
uhci3: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 16 at
device 29.3 on pci0