Re: [regression] 8.0-CURRENT amd64: SATA disks not attaching, MCP55 controller

From: Florian Smeets <flo_at_kasimir.com>
Date: Thu, 06 Aug 2009 09:28:58 +0200
On 8/5/09 10:17 PM, Sticky Bit wrote:
> Hello,
>
> I have a similar problem with 8.0-CURRENT amd64 like described in PR 128686
> and PR 132372 and several older ones. Short: SATA disks will not attach.
>
> Some example (please see full logs below):
>
> [...]
> ata3: Identifying devices: 00000001
> ata3: New devices: 00000001
> ata3: reiniting channel ..
> ata3: SATA connect time=0ms status=00000123
> ata3: reset tp1 mask=01 ostat0=58 ostat1=00
> ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata3: reset tp2 stat0=50 stat1=00 devices=0x1
> ata3: reinit done ..
> unknown: FAILURE - ATA_IDENTIFY timed out LBA=0
> [...]
>
> SATA 300 controller is a MCP55 (ULTRA, not SLI) chip, which is working without
> any problems for years. Works fine with recent RELENG_7 amd64, but not with
> RELENG_8 amd64.
>
> RELENG_8 i386 seems to attach the disks. So it looks like an amd64 only bug.
>

Hi,

i had the same problem with MCP55 on amd64, i tried the new ahci module 
but to no avail.

However if you set hw.pci.mcfg=0 the disks are found by the normal ata 
driver (this is already mentioned in one of the PRs).

Cheers,
Florian
Received on Thu Aug 06 2009 - 05:47:30 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:53 UTC