On Tue, Aug 18, 2009 at 6:57 AM, Ian FREISLICH <ianf_at_clue.co.za> wrote: > Robert Watson wrote: > > > > On Thu, 13 Aug 2009, Tom Uffner wrote: > > > > > i'm hoping a few people will give me estimates on what kind of > > > throughput i should theoretically expect before i provide any actual > > > test data. also, any suggestions on tuning would be welcome. > I havn't tried 800Mhz hardware, but I have extensive experience with the 266Mhz c3 in the WRAP board for comparison. The 266 Mhz part has no heatsink, but I've found it to be flakey in "hot" environments if a heatsink is not rigged to it. So... the WRAP boards have 3 "sis" interfaces. With various combinations of usage, one can expect 30 megabit of average sized packets if they kernel is doing the passing. This makes the board an adequate wireless bridge. If userland is doing the packet passing (pppd vs. mpd as a DSL router), I've had trouble getting more than about 10 megabit through the unit. This makes it an adequate DSL router but poor for aggregating multiple links.Received on Tue Aug 18 2009 - 16:03:09 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:54 UTC