Re: USB Card Reader not detected

Hi,

It worked yeasterday and today without a problem.
I don't know what was the problem but seems okay now.

Thanks,
Hiro


On Thu, 27 Aug 2009 09:22:26 +0200
Hans Petter Selasky <hselasky_at_c2i.net> wrote:

> On Thursday 27 August 2009 05:37:32 Yoshihiro Ota wrote:
> > On Wed, 26 Aug 2009 20:15:09 +0200
> >
> > Hans Petter Selasky <hselasky_at_c2i.net> wrote:
> > > On Wednesday 26 August 2009 19:05:57 Yoshihiro Ota wrote:
> > > > Hi.
> > > >
> > > > I have a 9-in-1 card reader that works fine on 7.1-RELEASE.
> > > > I tested on 8-BETA2 or 3, updated with CVS this Monday but devices like
> > > > daX didn't come up.
> > >
> > > Hi,
> > >
> > > If there are no messages printed at all in dmesg, then you can try
> > > enabling USB debugging for the HUB:
> > >
> > > sysctl hw.usb.uhub.debug=15
> > >
> > > --HPS
> >
> > It was 8-BETA3.
> > I just realized that the following dmesg keeps coming every second.
> > It is pasted at the bottom.
> >
> > I also realized anther problem.
> > I have HP Pavilion dv6425us.
> > Release 7.x with this hardware cannot write correct msdos fs.
> > It can read and write files of its own with FreeBSD on dv6425us.
> > However, when I take this CF card, others, MaxOS X, FreeBSD on
> > other hardwares, and Windows with even this hardware, cannot
> > read or write the file written by FreeBSD on dv6425us.
> > FreeBSD dv6425us cannot read files written by others as well.
> > I have UFS on external drives; they don't have same kinds of issues.
> >
> > Thanks,
> > Hiro
> >
> >
> > uhub_read_port_status:279: port 8, wPortStatus=0x0500, wPortChange=0x0000,
> > err=USB_ERR_NORMAL_COMPLETION usb_needs_explore:1407:
> > usb_bus_powerd:1594: bus=0xc4f1daa0
> > usb_bus_powerd:1677: Recomputing power masks
> > uhub_explore:559: udev=0xc507dc00 addr=1
> > uhub_read_port_status:279: port 1, wPortStatus=0x0100, wPortChange=0x0000,
> > err=USB_ERR_NORMAL_COMPLETION uhub_read_port_status:279: port 2,
> > wPortStatus=0x0100, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
> > uhub_read_port_status:279: port 3, wPortStatus=0x0100, wPortChange=0x0000,
> > err=USB_ERR_NORMAL_COMPLETION uhub_read_port_status:279: port 4,
> > wPortStatus=0x0100, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
> > uhub_read_port_status:279: port 5, wPortStatus=0x0100, wPortChange=0x0000,
> > err=USB_ERR_NORMAL_COMPLETION uhub_read_port_status:279: port 6,
> > wPortStatus=0x0100, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
> > uhub_read_port_status:279: port 7, wPortStatus=0x0100, wPortChange=0x0000,
> > err=USB_ERR_NORMAL_COMPLETION uhub_read_port_status:279: port 8,
> > wPortStatus=0x0100, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
> 
> Hi,
> 
> If no devices are detected by uhub, then maybe it is due to the new Power Save 
> support, which is not supported by your Host Controller. Try plugging in a USB 
> HUB before booting.
> 
> You should look for wPortChange != 0.
> 
> --HPS