Re: USB Harddrive not recognized (umass appears, da0 not)

From: Bernd Walter <ticso_at_cicely7.cicely.de>
Date: Mon, 31 Aug 2009 21:07:35 +0200
On Mon, Aug 31, 2009 at 06:59:18PM +0200, Tobias Grosser wrote:
> On Mon, 2009-08-31 at 11:52 +0200, Bernd Walter wrote:
> > On Sun, Aug 30, 2009 at 07:09:29PM +0200, Hans Petter Selasky wrote:
> > > Hi,
> > > 
> > > I looks like your device is hanging on SCSI command 0x12,00,00,00,4a,00
> > 
> > 0x12 is an inquiry, which is bad if the device has problems with.
> 
> I tried Linux on the same computer and the drive worked without any
> problems.
> 

If those are timestamps then there is a 5 second delay.
I wouldn't say that this is without problems.
Maybe Linux just has a different handling of the case.

> ---------------------------------------
> linux_dmesg.log is attached.
> ---------------------------------------
> 
> There was also another report where the drive did not work on FreeBSD. I
> mailed the user and he did not get it to run on FreeBSD, but his drive
> also works on Linux.
> 
> http://lists.freebsd.org/pipermail/freebsd-stable/2006-September/028999.html
> 
> As I have two of these drives, I am pretty sure my device is not
> completely broken, but WD has some uncommon/broken way to interact with
> FreeBSD.
> 
> To narrow it down I run the usb.org compliance test utility.
> 
> http://www.usb.org/developers/tools/ : USB20CV R1.3.5.5

As Hans Petter said: this is not a USB problem, it is at SCSI.

> The results for the generic device test and for the USB mass storage
> test are attached.

If this is just are startup problem you won't see anything at all after
probing is over.
My assumption would be that the device missbehaves until it spun up.
But this is just an assumption.

> ---------------------------------------
> umass_compliance.html
> usb_device_compliance.html
> ---------------------------------------
> 
> The device passed all tests. I do not understand all the details, but at
> least the test suites also issues "Inquiries" without hanging the
> device.
> 
> Hopefully these logs can give us some insights where the problem might
> be hidden.
> 
> > > This is not an USB fault.
> 
> Tobi

> [  121.526008] usb 1-2: new high speed USB device using ehci_hcd and address 4
> [  121.651218] usb 1-2: configuration #1 chosen from 1 choice
> [  121.651806] scsi4 : SCSI emulation for USB Mass Storage devices
> [  121.659671] usb-storage: device found at 4
> [  121.659676] usb-storage: waiting for device to settle before scanning
> [  121.659976] usb 1-2: New USB device found, idVendor=1058, idProduct=0704
> [  121.659982] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [  121.659987] usb 1-2: Product: External HDD    
> [  121.659991] usb 1-2: Manufacturer: Western Digital 
> [  121.659995] usb 1-2: SerialNumber: 57442D575835304136395033343438
> [  126.660009] scsi 4:0:0:0: Direct-Access     WD       3200BMV External 1.75 PQ: 0 ANSI: 4
> [  126.676485] sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
> [  126.676975] sd 4:0:0:0: [sdb] Write Protect is off
> [  126.676980] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
> [  126.676985] sd 4:0:0:0: [sdb] Assuming drive cache: write through
> [  126.677725] sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
> [  126.678221] sd 4:0:0:0: [sdb] Write Protect is off
> [  126.678226] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
> [  126.678230] sd 4:0:0:0: [sdb] Assuming drive cache: write through
> [  126.678238]  sdb: unknown partition table
> [  126.723728] sd 4:0:0:0: [sdb] Attached SCSI disk
> [  126.723919] sd 4:0:0:0: Attached scsi generic sg1 type 0
> [  126.724381] usb-storage: device scan complete

> <html><head>
> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
> <title>MSC Tests 2009-08-31 09-48-31</title></head><body bgcolor="#ffffff"><strong>WORKSTATION: </strong> OMICRON<br>
> <strong>DATE: </strong> Monday, August 31, 2009<br>
> <strong>TIME: </strong> 09:50:13 AM<br>
> <strong>OPERATOR: </strong> Michael<br>
> <strong>NUMBER OF TESTS: </strong> 22<br>
> <strong>RESULT: </strong> passed<br>
> <hr><br><table bgcolor="#ffffdd" border="3">
> <tbody><tr><td colspan="2"><b>InitializeTestSuite</b></td></tr>
> <tr><td colspan="2"><pre>INFO    Log initialized
> INFO    Microsoft Windows NT version 6.0 (Build 6000)
> INFO    Service Pack 0.0
> INFO    USBCommandVerifier.dll ver 1.3.3.3
> INFO    TestServices.dll ver 1.3.3.5
> INFO    StackSwitcher.dll ver 1.3.3.3
> </pre></td></tr>
> <tr><td><b><a name="anchor_5">MSC SerialNumberTest_DeviceAddressed</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Serial Number Test (Configuration Index 0)
> 
> INFO    Start time: 09:48:42
> 
> INFO    Serial Number string for MSC device : iSerialNumber = 0x3
> INFO    ENGLISH_US           language string descriptor is : 57442D575835304136395033343438
> INFO    Using Language ID 0x409
> INFO    MSC Serial Number length = 62
> INFO    MSC Serial Number length = 62
> INFO    MSC Serial Number string descriptor type = 0x3
> INFO    MSC Serial Number length = 62
> INFO    MSC Serial Number string descriptor type = 0x3
> INFO    MSC Serial Number character [0] = 0x35
> INFO    MSC Serial Number character [1] = 0x37
> INFO    MSC Serial Number character [2] = 0x34
> INFO    MSC Serial Number character [3] = 0x34
> INFO    MSC Serial Number character [4] = 0x32
> INFO    MSC Serial Number character [5] = 0x44
> INFO    MSC Serial Number character [6] = 0x35
> INFO    MSC Serial Number character [7] = 0x37
> INFO    MSC Serial Number character [8] = 0x35
> INFO    MSC Serial Number character [9] = 0x38
> INFO    MSC Serial Number character [10] = 0x33
> INFO    MSC Serial Number character [11] = 0x35
> INFO    MSC Serial Number character [12] = 0x33
> INFO    MSC Serial Number character [13] = 0x30
> INFO    MSC Serial Number character [14] = 0x34
> INFO    MSC Serial Number character [15] = 0x31
> INFO    MSC Serial Number character [16] = 0x33
> INFO    MSC Serial Number character [17] = 0x36
> INFO    MSC Serial Number character [18] = 0x33
> INFO    MSC Serial Number character [19] = 0x39
> INFO    MSC Serial Number character [20] = 0x35
> INFO    MSC Serial Number character [21] = 0x30
> INFO    MSC Serial Number character [22] = 0x33
> INFO    MSC Serial Number character [23] = 0x33
> INFO    MSC Serial Number character [24] = 0x33
> INFO    MSC Serial Number character [25] = 0x34
> INFO    MSC Serial Number character [26] = 0x33
> INFO    MSC Serial Number character [27] = 0x34
> INFO    MSC Serial Number character [28] = 0x33
> INFO    MSC Serial Number character [29] = 0x38
> INFO    MSC Serial Number length = 62
> INFO    MSC Serial Number string descriptor type = 0x3
> INFO    MSC Serial Number character [0] = 0x35
> INFO    MSC Serial Number character [1] = 0x37
> INFO    MSC Serial Number character [2] = 0x34
> INFO    MSC Serial Number character [3] = 0x34
> INFO    MSC Serial Number character [4] = 0x32
> INFO    MSC Serial Number character [5] = 0x44
> INFO    MSC Serial Number character [6] = 0x35
> INFO    MSC Serial Number character [7] = 0x37
> INFO    MSC Serial Number character [8] = 0x35
> INFO    MSC Serial Number character [9] = 0x38
> INFO    MSC Serial Number character [10] = 0x33
> INFO    MSC Serial Number character [11] = 0x35
> INFO    MSC Serial Number character [12] = 0x33
> INFO    MSC Serial Number character [13] = 0x30
> INFO    MSC Serial Number character [14] = 0x34
> INFO    MSC Serial Number character [15] = 0x31
> INFO    MSC Serial Number character [16] = 0x33
> INFO    MSC Serial Number character [17] = 0x36
> INFO    MSC Serial Number character [18] = 0x33
> INFO    MSC Serial Number character [19] = 0x39
> INFO    MSC Serial Number character [20] = 0x35
> INFO    MSC Serial Number character [21] = 0x30
> INFO    MSC Serial Number character [22] = 0x33
> INFO    MSC Serial Number character [23] = 0x33
> INFO    MSC Serial Number character [24] = 0x33
> INFO    MSC Serial Number character [25] = 0x34
> INFO    MSC Serial Number character [26] = 0x33
> INFO    MSC Serial Number character [27] = 0x34
> INFO    MSC Serial Number character [28] = 0x33
> INFO    MSC Serial Number character [29] = 0x38
> INFO    Unconfiguring the device
> INFO    Stop time: 09:48:43
> INFO    Stopping Test [ USB Mass Storage Serial Number Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_6">MSC SerialNumberTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Serial Number Test (Configuration Index 0)
> 
> INFO    Start time: 09:48:43
> 
> INFO    Serial Number string for MSC device : iSerialNumber = 0x3
> INFO    ENGLISH_US           language string descriptor is : 57442D575835304136395033343438
> INFO    Using Language ID 0x409
> INFO    MSC Serial Number length = 62
> INFO    MSC Serial Number length = 62
> INFO    MSC Serial Number string descriptor type = 0x3
> INFO    MSC Serial Number length = 62
> INFO    MSC Serial Number string descriptor type = 0x3
> INFO    MSC Serial Number character [0] = 0x35
> INFO    MSC Serial Number character [1] = 0x37
> INFO    MSC Serial Number character [2] = 0x34
> INFO    MSC Serial Number character [3] = 0x34
> INFO    MSC Serial Number character [4] = 0x32
> INFO    MSC Serial Number character [5] = 0x44
> INFO    MSC Serial Number character [6] = 0x35
> INFO    MSC Serial Number character [7] = 0x37
> INFO    MSC Serial Number character [8] = 0x35
> INFO    MSC Serial Number character [9] = 0x38
> INFO    MSC Serial Number character [10] = 0x33
> INFO    MSC Serial Number character [11] = 0x35
> INFO    MSC Serial Number character [12] = 0x33
> INFO    MSC Serial Number character [13] = 0x30
> INFO    MSC Serial Number character [14] = 0x34
> INFO    MSC Serial Number character [15] = 0x31
> INFO    MSC Serial Number character [16] = 0x33
> INFO    MSC Serial Number character [17] = 0x36
> INFO    MSC Serial Number character [18] = 0x33
> INFO    MSC Serial Number character [19] = 0x39
> INFO    MSC Serial Number character [20] = 0x35
> INFO    MSC Serial Number character [21] = 0x30
> INFO    MSC Serial Number character [22] = 0x33
> INFO    MSC Serial Number character [23] = 0x33
> INFO    MSC Serial Number character [24] = 0x33
> INFO    MSC Serial Number character [25] = 0x34
> INFO    MSC Serial Number character [26] = 0x33
> INFO    MSC Serial Number character [27] = 0x34
> INFO    MSC Serial Number character [28] = 0x33
> INFO    MSC Serial Number character [29] = 0x38
> INFO    MSC Serial Number length = 62
> INFO    MSC Serial Number string descriptor type = 0x3
> INFO    MSC Serial Number character [0] = 0x35
> INFO    MSC Serial Number character [1] = 0x37
> INFO    MSC Serial Number character [2] = 0x34
> INFO    MSC Serial Number character [3] = 0x34
> INFO    MSC Serial Number character [4] = 0x32
> INFO    MSC Serial Number character [5] = 0x44
> INFO    MSC Serial Number character [6] = 0x35
> INFO    MSC Serial Number character [7] = 0x37
> INFO    MSC Serial Number character [8] = 0x35
> INFO    MSC Serial Number character [9] = 0x38
> INFO    MSC Serial Number character [10] = 0x33
> INFO    MSC Serial Number character [11] = 0x35
> INFO    MSC Serial Number character [12] = 0x33
> INFO    MSC Serial Number character [13] = 0x30
> INFO    MSC Serial Number character [14] = 0x34
> INFO    MSC Serial Number character [15] = 0x31
> INFO    MSC Serial Number character [16] = 0x33
> INFO    MSC Serial Number character [17] = 0x36
> INFO    MSC Serial Number character [18] = 0x33
> INFO    MSC Serial Number character [19] = 0x39
> INFO    MSC Serial Number character [20] = 0x35
> INFO    MSC Serial Number character [21] = 0x30
> INFO    MSC Serial Number character [22] = 0x33
> INFO    MSC Serial Number character [23] = 0x33
> INFO    MSC Serial Number character [24] = 0x33
> INFO    MSC Serial Number character [25] = 0x34
> INFO    MSC Serial Number character [26] = 0x33
> INFO    MSC Serial Number character [27] = 0x34
> INFO    MSC Serial Number character [28] = 0x33
> INFO    MSC Serial Number character [29] = 0x38
> INFO    Unconfiguring the device
> INFO    Stop time: 09:48:44
> INFO    Stopping Test [ USB Mass Storage Serial Number Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_7">MSC InterfaceDescriptorTest_DeviceAddressed</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Interface Descriptor Test (Configuration Index 0)
> 
> INFO    Start time: 09:48:44
> 
> INFO    MSC Interface Class code = 0x8
> INFO    MSC Interface Sub Class code = 0x6
> INFO    MSC Interface Protocol code = 0x50
> INFO    Number of endpoints for MSC Interface = 2
> INFO    Serial Number string for MSC device : iSerialNumber = 0x3
> INFO    Using Language ID 0x409
> INFO    Unconfiguring the device
> INFO    Stop time: 09:48:45
> INFO    Stopping Test [ USB Mass Storage Interface Descriptor Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_8">MSC InterfaceDescriptorTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Interface Descriptor Test (Configuration Index 0)
> 
> INFO    Start time: 09:48:45
> 
> INFO    MSC Interface Class code = 0x8
> INFO    MSC Interface Sub Class code = 0x6
> INFO    MSC Interface Protocol code = 0x50
> INFO    Number of endpoints for MSC Interface = 2
> INFO    Serial Number string for MSC device : iSerialNumber = 0x3
> INFO    Using Language ID 0x409
> INFO    Unconfiguring the device
> INFO    Stop time: 09:48:46
> INFO    Stopping Test [ USB Mass Storage Interface Descriptor Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_9">MSC ClassRequestTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Class Request Test (Configuration Index 0)
> 
> INFO    Start time: 09:48:46
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Issuing valid Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Issuing Get Max LUN request with invalid wIndex parameter
> INFO    Issuing Get Max LUN request with invalid wValue parameter
> INFO    Issuing Get Max LUN request with incorrect Length parameter (=0)
> INFO    Issuing Get Max LUN request with incorrect Length parameter (&gt;1)
> INFO    Issuing valid Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Issuing valid BOT MSC Reset request
> INFO    Issuing BOT MSC Reset request with incorrect wIndex parameter
> INFO    Issuing BOT MSC Reset request with incorrect wValue parameter
> INFO    Issuing BOT MSC Reset request with incorrect Length parameter (&gt;0)
> INFO    Issuing valid BOT MSC Reset request
> INFO    Unconfiguring the device
> INFO    Stop time: 09:48:53
> INFO    Stopping Test [ USB Mass Storage Class Request Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_10">MSC ErrorRecoveryTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Error Recovery Test (Configuration Index 0)
> 
> INFO    Start time: 09:48:53
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Issue CBW with invalid signature
> INFO    Issuing invalid CBW
> INFO    CBW successful
> INFO    Issuing CSW 2 times, CSW should stall in every case
> INFO    Issuing CSW 1
> INFO    Issuing CSW 2
> INFO    Retrieving status on CSW endpoint
> INFO    CSW endpoint status = 0x1
> INFO    CSW endpoint stalled
> INFO    Clearing stalled CSW endpoint
> INFO    Issuing CSW 2 times, CSW should stall in every case
> INFO    Issuing CSW 1
> INFO    Bulk Request timed out!
> ERROR   Invalid response, CSW should STALL
> INFO    *************************
> WARNING (5.2.1) Devices receiving a CBW with an invalid signature should stall 
>  further traffic on the Bulk In pipe, and either stall further traffic 
>  or accept and discard further traffic on the Bulk Out pipe, until 
>  reset recovery.  If the device does not react in this manner, it 
>  should at least respond correctly to a Reset Recovery.
> INFO    *************************
> INFO    Issuing BOT MSC Reset, reset should always succeed
> INFO    Retrieving status on CBW endpoint
> INFO    CBW endpoint status = 0x0
> INFO    Retrieving status on CSW endpoint
> INFO    CSW endpoint status = 0x0
> INFO    Issuing required command (Test Unit Ready) to verify device has recovered
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issue a short CBW (&lt;31 bytes)
> INFO    Issuing invalid CBW
> INFO    CBW successful
> INFO    Issuing CSW 2 times, CSW should stall in every case
> INFO    Issuing CSW 1
> INFO    Issuing CSW 2
> INFO    Retrieving status on CSW endpoint
> INFO    CSW endpoint status = 0x1
> INFO    CSW endpoint stalled
> INFO    Clearing stalled CSW endpoint
> INFO    Issuing CSW 2 times, CSW should stall in every case
> INFO    Issuing CSW 1
> INFO    Bulk Request timed out!
> ERROR   Invalid response, CSW should STALL
> INFO    *************************
> WARNING (5.2.2) Devices receiving a CBW with the wrong length should stall 
>  further traffic on the Bulk In pipe, and either stall further 
>  traffic or accept and discard further traffic on the Bulk Out 
>  pipe, until reset recovery.  If the device does not react in this 
>  manner, it should at least respond correctly to a Reset Recovery.
> INFO    *************************
> INFO    Issuing BOT MSC Reset, reset should always succeed
> INFO    Retrieving status on CBW endpoint
> INFO    CBW endpoint status = 0x0
> INFO    Retrieving status on CSW endpoint
> INFO    CSW endpoint status = 0x0
> INFO    Issuing required command (Test Unit Ready) to verify device has recovered
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issue a long CBW (&gt;31 bytes)
> INFO    Issuing invalid CBW
> INFO    CBW successful
> INFO    Issuing CSW 2 times, CSW should stall in every case
> INFO    Issuing CSW 1
> INFO    Issuing CSW 2
> INFO    Retrieving status on CSW endpoint
> INFO    CSW endpoint status = 0x1
> INFO    CSW endpoint stalled
> INFO    Clearing stalled CSW endpoint
> INFO    Issuing CSW 2 times, CSW should stall in every case
> INFO    Issuing CSW 1
> INFO    Bulk Request timed out!
> ERROR   Invalid response, CSW should STALL
> INFO    *************************
> WARNING (5.2.2) Devices receiving a CBW with the wrong length should stall 
>  further traffic on the Bulk In pipe, and either stall further 
>  traffic or accept and discard further traffic on the Bulk Out 
>  pipe, until reset recovery.  If the device does not react in this 
>  manner, it should at least respond correctly to a Reset Recovery.
> INFO    *************************
> INFO    Issuing BOT MSC Reset, reset should always succeed
> INFO    Retrieving status on CBW endpoint
> INFO    CBW endpoint status = 0x0
> INFO    Retrieving status on CSW endpoint
> INFO    CSW endpoint status = 0x0
> INFO    Issuing required command (Test Unit Ready) to verify device has recovered
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:25
> INFO    Stopping Test [ USB Mass Storage Error Recovery Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (3) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_11">MSC CaseOneTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case One Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:25
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 1 (Hn = Dn)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:26
> INFO    Stopping Test [ USB Mass Storage Case One Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_12">MSC CaseTwoTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case Two Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:26
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 2 (Hn &lt; Di)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x28
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x1
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x2
> INFO    CSW reported a phase error, issuing BOT MSC Reset
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:27
> INFO    Stopping Test [ USB Mass Storage Case Two Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_13">MSC CaseThreeTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case Three Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:27
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 3 (Hn &lt; Do)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2a
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x1
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x2
> INFO    CSW reported a phase error, issuing BOT MSC Reset
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:28
> INFO    Stopping Test [ USB Mass Storage Case Three Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_14">MSC CaseFourTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case Four Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:28
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 4 (Hi &gt; Dn)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x200
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x28
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    DATA phase stalled
> INFO    Retrieving status on stalled bulk endpoint
> INFO    Bulk endpoint status = 0x1
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x200
> INFO    CSW status returned = 0x0
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:29
> INFO    Stopping Test [ USB Mass Storage Case Four Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_15">MSC CaseFiveTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case Five Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:29
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 5 (Hi &gt; Di)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x400
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x28
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x1
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    DATA phase stalled
> INFO    Retrieving status on stalled bulk endpoint
> INFO    Bulk endpoint status = 0x1
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x200
> INFO    CSW status returned = 0x0
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:30
> INFO    Stopping Test [ USB Mass Storage Case Five Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_16">MSC CaseSixTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case Six Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:30
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 6 (Hi = Di)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x200
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x28
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x1
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:31
> INFO    Stopping Test [ USB Mass Storage Case Six Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_17">MSC CaseSevenTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case Seven Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:31
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 7 (Hi &lt; Di)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x200
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x28
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x2
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    DATA phase stalled
> INFO    Retrieving status on stalled bulk endpoint
> INFO    Bulk endpoint status = 0x1
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x2
> INFO    CSW reported a phase error, issuing BOT MSC Reset
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:32
> INFO    Stopping Test [ USB Mass Storage Case Seven Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_18">MSC CaseEightTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case Eight Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:33
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 8 (Hi &lt;&gt; Do)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x200
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2a
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x1
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    DATA phase stalled
> INFO    Retrieving status on stalled bulk endpoint
> INFO    Bulk endpoint status = 0x1
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x200
> INFO    CSW status returned = 0x2
> INFO    CSW reported a phase error, issuing BOT MSC Reset
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:34
> INFO    Stopping Test [ USB Mass Storage Case Eight Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_19">MSC CaseNineTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case Nine Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:34
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 9 (Ho &gt; Dn)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x200
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x200
> INFO    CSW status returned = 0x0
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:35
> INFO    Stopping Test [ USB Mass Storage Case Nine Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_20">MSC CaseTenTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case Ten Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:35
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 10 (Ho &lt;&gt; Di)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x200
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x28
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x1
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x200
> INFO    CSW status returned = 0x2
> INFO    CSW reported a phase error, issuing BOT MSC Reset
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:36
> INFO    Stopping Test [ USB Mass Storage Case Ten Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_21">MSC CaseElevenTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case Eleven Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:36
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 11 (Ho &gt; Do)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x400
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2a
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x1
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x200
> INFO    CSW status returned = 0x0
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:37
> INFO    Stopping Test [ USB Mass Storage Case Eleven Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_22">MSC CaseTwelveTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case Twelve Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:37
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 12 (Ho = Do)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x400
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2a
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x2
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:38
> INFO    Stopping Test [ USB Mass Storage Case Twelve Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_23">MSC CaseThirteenTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Case Thirteen Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:38
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing BOT Case 13 (Ho &lt; Do)
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x200
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2a
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x2
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x200
> INFO    CSW status returned = 0x2
> INFO    CSW reported a phase error, issuing BOT MSC Reset
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:39
> INFO    Stopping Test [ USB Mass Storage Case Thirteen Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_24">MSC CBLengthTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage CBLength Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:39
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing CBLength test w/ pad bytes = 0xff
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing CBLength test w/ pad bytes = 0x55
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing CBLength test w/ pad bytes = 0xaa
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:40
> INFO    Stopping Test [ USB Mass Storage CBLength Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_25">MSC CommandSetTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Required Command Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:40
> 
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x12, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x12, Test Variation #2
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x1
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x1
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x12, Test Variation #3
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x2
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x2
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x12, Test Variation #4
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x4
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x4
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x12, Test Variation #5
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x5
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x5
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x12, Test Variation #6
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x12, Test Variation #7
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0xff
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0xff
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    *************************
> WARNING Expecting a STALL after data phase completes with a zero-length or short packet
> INFO    *************************
> INFO    If the device actually transfers less data than the host indicated, the device shall STALL the Bulk-In pipe
> INFO    CSW residue returned = 0xb5
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x03, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x3
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x03, Test Variation #2
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x1
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x3
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x1
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x03, Test Variation #3
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x2
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x3
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x2
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x03, Test Variation #4
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x12
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x3
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x12
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x03, Test Variation #5
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0xff
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x3
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0xff
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    *************************
> WARNING Expecting a STALL after data phase completes with a zero-length or short packet
> INFO    *************************
> INFO    If the device actually transfers less data than the host indicated, the device shall STALL the Bulk-In pipe
> INFO    CSW residue returned = 0xed
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x00, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x28, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x1000
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x28
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x8
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x28, Test Variation #2
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x2000
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x28
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x10
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x28, Test Variation #3
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x4000
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x28
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x20
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x28, Test Variation #4
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8000
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x28
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x40
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x28, Test Variation #5
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x10000
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x28
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x80
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0xa8, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x1000
> INFO    |----- CBW CDB Length           = 0xc
> INFO    |----- CBW CDB-00 = 0xa8
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x8
> INFO    |----- CBW CDB-10 = 0x0
> INFO    |----- CBW CDB-11 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0xa8, Test Variation #2
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x2000
> INFO    |----- CBW CDB Length           = 0xc
> INFO    |----- CBW CDB-00 = 0xa8
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x10
> INFO    |----- CBW CDB-10 = 0x0
> INFO    |----- CBW CDB-11 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0xa8, Test Variation #3
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x4000
> INFO    |----- CBW CDB Length           = 0xc
> INFO    |----- CBW CDB-00 = 0xa8
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x20
> INFO    |----- CBW CDB-10 = 0x0
> INFO    |----- CBW CDB-11 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0xa8, Test Variation #4
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8000
> INFO    |----- CBW CDB Length           = 0xc
> INFO    |----- CBW CDB-00 = 0xa8
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x40
> INFO    |----- CBW CDB-10 = 0x0
> INFO    |----- CBW CDB-11 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0xa8, Test Variation #5
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x10000
> INFO    |----- CBW CDB Length           = 0xc
> INFO    |----- CBW CDB-00 = 0xa8
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x80
> INFO    |----- CBW CDB-10 = 0x0
> INFO    |----- CBW CDB-11 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x25, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x2a, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x1000
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2a
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x8
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x2a, Test Variation #2
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x2000
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2a
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x10
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x2a, Test Variation #3
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x4000
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2a
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x20
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x2a, Test Variation #4
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x8000
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2a
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x40
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x2a, Test Variation #5
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x10000
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2a
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x80
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0xaa, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x1000
> INFO    |----- CBW CDB Length           = 0xc
> INFO    |----- CBW CDB-00 = 0xaa
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x8
> INFO    |----- CBW CDB-10 = 0x0
> INFO    |----- CBW CDB-11 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0xaa, Test Variation #2
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x2000
> INFO    |----- CBW CDB Length           = 0xc
> INFO    |----- CBW CDB-00 = 0xaa
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x10
> INFO    |----- CBW CDB-10 = 0x0
> INFO    |----- CBW CDB-11 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0xaa, Test Variation #3
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x4000
> INFO    |----- CBW CDB Length           = 0xc
> INFO    |----- CBW CDB-00 = 0xaa
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x20
> INFO    |----- CBW CDB-10 = 0x0
> INFO    |----- CBW CDB-11 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0xaa, Test Variation #4
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x8000
> INFO    |----- CBW CDB Length           = 0xc
> INFO    |----- CBW CDB-00 = 0xaa
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x40
> INFO    |----- CBW CDB-10 = 0x0
> INFO    |----- CBW CDB-11 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0xaa, Test Variation #5
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x10000
> INFO    |----- CBW CDB Length           = 0xc
> INFO    |----- CBW CDB-00 = 0xaa
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x80
> INFO    |----- CBW CDB-10 = 0x0
> INFO    |----- CBW CDB-11 = 0x0
> INFO    Issuing DATA OUT
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x15, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x15
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x55, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x55
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x1a, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x4
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x1a
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x3f
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x4
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x5a, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x5a
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x3f
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x8
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x1e, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x1e
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x1
> INFO    Request failed, issuing Request Sense
> INFO    Issuing CBW:
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x12
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x3
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x12
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    REQUEST_SENSE - Key = 0x5, Code = 0x20, Qualifier  0x0
> INFO    Allowing Errors on odd-byte transfers
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x1b, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x1b
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x1
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Command Set Test for Op Code 0x43 not applicable for PDT = 0x00
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Issuing Command Set Test for Op Code 0x2f, Test Variation #1
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2f
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x8
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x2f, Test Variation #2
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2f
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x10
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x2f, Test Variation #3
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2f
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x20
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x2f, Test Variation #4
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2f
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x40
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Issuing Command Set Test for Op Code 0x2f, Test Variation #5
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x2f
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x80
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Unconfiguring the device
> INFO    Stop time: 09:49:41
> INFO    Stopping Test [ USB Mass Storage Required Command Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (2) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_26">MSC PowerUpTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: USB Mass Storage Power Up Test (Configuration Index 0)
> 
> INFO    Start time: 09:49:42
> 
> INFO    Attempting to re-enumerate device
> ERROR   CVHub_ReEnumerateAll::Could not find device under test after enumeration
> ERROR   CVHub_ReEnumerateAll::Could not find device under test after enumeration
> ERROR   CVHub_ReEnumerateAll::Could not find device under test after enumeration
> ERROR   CVHub_ReEnumerateAll::Could not find device under test after enumeration
> ERROR   CVHub_ReEnumerateAll::Could not find device under test after enumeration
> ERROR   CVHub_ReEnumerateAll::Could not find device under test after enumeration
> ERROR   CVHub_ReEnumerateAll::Could not find device under test after enumeration
> ERROR   CVHub_ReEnumerateAll::Could not find device under test after enumeration
> ERROR   CVHub_ReEnumerateAll::Could not find device under test after enumeration
> INFO    Device has been re-enumerated, perform PowerUp test
> INFO    Configuring device, set configuration = 0x1
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetConfiguration call
> INFO    Setting device interface, interface number = 0x0 and alternate setting = 0x0
> INFO    NOTE: It is expected the device has reset the data toggles on all Bulk endpoints after the above SetInterface call
> INFO    Issuing Get Max LUN request
> INFO    Max LUN value = 0
> INFO    Getting Device Type
> INFO    Issuing INQUIRY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x24
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x12
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x24
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    INQUIRY - Devicetype = 0x0
> INFO    **
> INFO    Now testing device 'WD       : 3200BMV External', LUN - 0
> INFO    **
> INFO    Waiting for device to become ready...
> INFO    Issuing TEST UNIT READY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x0
> INFO    |----- CBW Data Transfer Length = 0x0
> INFO    |----- CBW CDB Length           = 0x6
> INFO    |----- CBW CDB-00 = 0x0
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    Device ready
> INFO    Getting Device BlockSize
> INFO    Issuing READ_CAPACITY
> INFO    Issuing CBW (attempt #1):
> INFO    |----- CBW LUN                  = 0x0
> INFO    |----- CBW Flags                = 0x80
> INFO    |----- CBW Data Transfer Length = 0x8
> INFO    |----- CBW CDB Length           = 0xa
> INFO    |----- CBW CDB-00 = 0x25
> INFO    |----- CBW CDB-01 = 0x0
> INFO    |----- CBW CDB-02 = 0x0
> INFO    |----- CBW CDB-03 = 0x0
> INFO    |----- CBW CDB-04 = 0x0
> INFO    |----- CBW CDB-05 = 0x0
> INFO    |----- CBW CDB-06 = 0x0
> INFO    |----- CBW CDB-07 = 0x0
> INFO    |----- CBW CDB-08 = 0x0
> INFO    |----- CBW CDB-09 = 0x0
> INFO    Issuing DATA IN
> INFO    Issuing CSW : try 1
> INFO    CSW residue returned = 0x0
> INFO    CSW status returned = 0x0
> INFO    READ_CAPACITY - LBA = 0x2542eaaf, BlockSize = 0x200
> INFO    Unconfiguring the device
> INFO    Stop time: 09:50:13
> INFO    Stopping Test [ USB Mass Storage Power Up Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td colspan="2"><b>MSC CompleteTests</b></td></tr>
> <tr><td colspan="2"><pre>INFO    **
> INFO    Device is considered compliant with the Bootability specification.
> INFO    **
> INFO    Summary Log Counts [ Fails (0); Aborts (0); Warnings (5) ]
> </pre></td></tr>
> </tbody></table></body></html>

> <html><head>
> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
> <title>Chapter 9 Tests 2009-08-31 09-53-09</title></head><body bgcolor="#ffffff"><strong>WORKSTATION: </strong> OMICRON<br>
> <strong>DATE: </strong> Monday, August 31, 2009<br>
> <strong>TIME: </strong> 09:54:23 AM<br>
> <strong>OPERATOR: </strong> Michael<br>
> <strong>NUMBER OF TESTS: </strong> 21<br>
> <strong>RESULT: </strong> passed<br>
> <hr><br><table bgcolor="#ffffdd" border="3">
> <tbody><tr><td colspan="2"><b>InitializeTestSuite</b></td></tr>
> <tr><td colspan="2"><pre>INFO    Log initialized
> INFO    Microsoft Windows NT version 6.0 (Build 6000)
> INFO    Service Pack 0.0
> INFO    USBCommandVerifier.dll ver 1.3.3.3
> INFO    TestServices.dll ver 1.3.3.5
> INFO    StackSwitcher.dll ver 1.3.3.3
> </pre></td></tr>
> <tr><td><b><a name="anchor_4">DeviceDescriptorTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Device Descriptor Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:17
> 
> INFO    Device descriptor length : 12
> INFO    Device descriptor type : 1
> INFO    Major version : 2
> INFO    Minor version : 0
> INFO    Each interface specifies its own device class type
> INFO    Device sub class : 0
> INFO    Device protocol : 0
> INFO    Device MaxPacketSize0 : 40
> ABORT   Create file on 'usb.if' failed
> WARNING Failed to get vendor information for VendorID : 1058
> INFO    Device ProductID : 704
> INFO    Device BCD : 175
> INFO    ENGLISH_US           language string descriptor is : Western Digital 
> INFO    ENGLISH_US           language string descriptor is : External HDD    
> INFO    ENGLISH_US           language string descriptor is : 57442D575835304136395033343438
> INFO    Number of configurations device supports : 1
> INFO    Stop time: 09:53:18
> INFO    Stopping Test [ Device Descriptor Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (1); Warnings (1) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_5">DeviceDescriptorTest_DeviceAddressed</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Device Descriptor Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:18
> 
> INFO    Device descriptor length : 12
> INFO    Device descriptor type : 1
> INFO    Major version : 2
> INFO    Minor version : 0
> INFO    Each interface specifies its own device class type
> INFO    Device sub class : 0
> INFO    Device protocol : 0
> INFO    Device MaxPacketSize0 : 40
> ABORT   Create file on 'usb.if' failed
> WARNING Failed to get vendor information for VendorID : 1058
> INFO    Device ProductID : 704
> INFO    Device BCD : 175
> INFO    ENGLISH_US           language string descriptor is : Western Digital 
> INFO    ENGLISH_US           language string descriptor is : External HDD    
> INFO    ENGLISH_US           language string descriptor is : 57442D575835304136395033343438
> INFO    Number of configurations device supports : 1
> INFO    Stop time: 09:53:19
> INFO    Stopping Test [ Device Descriptor Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (1); Warnings (1) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_6">ConfigDescriptorTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Configuration Descriptor Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:19
> 
> INFO    Number of interface descriptors found 1
> INFO    Number of alternate interface descriptors found : 0
> INFO    Number of endpoint descriptors found : 2
> INFO    Configuration descriptor length : 9
> INFO    Configuration descriptor type : 2
> INFO    Configuration descriptor TotalLength : 20
> INFO    Configuration descriptor NumInterfaces : 1
> INFO    Configuration descriptor ConfigurationValue: 1
> INFO    Configuration descriptor string descriptor index : 0
> INFO    Configuration descriptor bmAttributes : c0
> INFO    Device does not support remote wake up
> INFO    Maximum power device requires : 2mA
> INFO    Device is BUS/SELF-POWERED
> INFO    Device is currently SELF POWERED
> INFO    Currently remote wakeup is DISABLED
> INFO    Stop time: 09:53:20
> INFO    Stopping Test [ Configuration Descriptor Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_7">ConfigDescriptorTest_DeviceAddressed</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Configuration Descriptor Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:20
> 
> INFO    Number of interface descriptors found 1
> INFO    Number of alternate interface descriptors found : 0
> INFO    Number of endpoint descriptors found : 2
> INFO    Configuration descriptor length : 9
> INFO    Configuration descriptor type : 2
> INFO    Configuration descriptor TotalLength : 20
> INFO    Configuration descriptor NumInterfaces : 1
> INFO    Configuration descriptor ConfigurationValue: 1
> INFO    Configuration descriptor string descriptor index : 0
> INFO    Configuration descriptor bmAttributes : c0
> INFO    Device does not support remote wake up
> INFO    Maximum power device requires : 2mA
> INFO    Device is BUS/SELF-POWERED
> INFO    Device is currently SELF POWERED
> INFO    Currently remote wakeup is DISABLED
> INFO    Stop time: 09:53:21
> INFO    Stopping Test [ Configuration Descriptor Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_8">InterfaceDescriptorTest</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Interface Descriptor Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:21
> 
> INFO    Bandwidth check passed
> INFO    Testing Interface number : 0 Alternate setting : 0
> INFO    Interface descriptor length : 9
> INFO    Interface descriptor bDescriptorType : 4
> INFO    Interface descriptor bAlternateSetting : 0
> INFO    Interface descriptor bNumEndPoints: 2
> INFO    Interface descriptor bInterfaceClass reserved for assignment by the USB-IF : 8
> INFO    Interface class code indicates [Mass-Storage] Interface
> INFO    Interface descriptor bInterfaceSubClass : 6
> INFO    Interface descriptor bInterfaceProtocol assigned by the USB-IF : 50
> INFO    Interface descriptor iInterface : 0x0
> INFO    Stop time: 09:53:22
> INFO    Stopping Test [ Interface Descriptor Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_9">EndpointDescriptorTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Endpoint Descriptor Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:22
> 
> INFO    Testing Interface number : 0 Alternate setting : 0
> INFO    Endpoint descriptor length : 7
> INFO    Endpoint descriptor type : 5
> INFO    Endpoint Type : Bulk, Number : 1, Direction : IN
> INFO    Endpoint descriptor bmAttributes : 2
> INFO    Endpoint descriptor raw MaxPacketSize : 200
> INFO    Endpoint descriptor interval : 0
> INFO    Endpoint descriptor length : 7
> INFO    Endpoint descriptor type : 5
> INFO    Endpoint Type : Bulk, Number : 2, Direction : OUT
> INFO    Endpoint descriptor bmAttributes : 2
> INFO    Endpoint descriptor raw MaxPacketSize : 200
> INFO    Endpoint descriptor interval : 0
> INFO    Stop time: 09:53:23
> INFO    Stopping Test [ Endpoint Descriptor Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_10">EndpointDescriptorTest_DeviceAddressed</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Endpoint Descriptor Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:23
> 
> INFO    Testing Interface number : 0 Alternate setting : 0
> INFO    Endpoint descriptor length : 7
> INFO    Endpoint descriptor type : 5
> INFO    Endpoint Type : Bulk, Number : 1, Direction : IN
> INFO    Endpoint descriptor bmAttributes : 2
> INFO    Endpoint descriptor raw MaxPacketSize : 200
> INFO    Endpoint descriptor interval : 0
> INFO    Endpoint descriptor length : 7
> INFO    Endpoint descriptor type : 5
> INFO    Endpoint Type : Bulk, Number : 2, Direction : OUT
> INFO    Endpoint descriptor bmAttributes : 2
> INFO    Endpoint descriptor raw MaxPacketSize : 200
> INFO    Endpoint descriptor interval : 0
> INFO    Stop time: 09:53:24
> INFO    Stopping Test [ Endpoint Descriptor Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_11">HaltEndpointTest</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Halt Endpoint Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:24
> 
> INFO    Testing Interface number : 0 Alternate setting : 0
> INFO    Testing EndPoint type : Bulk, Address : 81
> INFO    Endpoint is currently not halted
> INFO    Endpoint is halted
> INFO    Cleared endpoint halt
> INFO    Testing EndPoint type : Bulk, Address : 2
> INFO    Endpoint is currently not halted
> INFO    Endpoint is halted
> INFO    Cleared endpoint halt
> INFO    Stop time: 09:53:25
> INFO    Stopping Test [ Halt Endpoint Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_12">SetConfigurationTest</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: SetConfiguration Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:25
> 
> INFO    SetConfiguration with configuration value : 1
> INFO    Unconfigured the device
> INFO    SetConfiguration with configuration value : 1
> INFO    Stop time: 09:53:26
> INFO    Stopping Test [ SetConfiguration Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_13">SuspendResumeTest</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Suspend/Resume Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:26
> 
> INFO    Suspended the parent port of the device
> INFO    Stop time: 09:53:28
> INFO    Stopping Test [ Suspend/Resume Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_14">RemoteWakeupTestEnabled</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Remote Wakeup Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:28
> 
> INFO    The device does not support remote wakeup
> INFO    Stop time: 09:53:29
> INFO    Stopping Test [ Remote Wakeup Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_15">RemoteWakeupTestDisabled</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Remote Wakeup Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:29
> 
> INFO    The device does not support remote wakeup
> INFO    Stop time: 09:53:30
> INFO    Stopping Test [ Remote Wakeup Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_16">OtherSpeedConfigTest_DeviceAddressed</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Other Speed Configuration Test (Configuration Index 0 OtherSpeedConfiguration Index 0)
> 
> INFO    Start time: 09:53:30
> 
> INFO    Number of interface descriptors found 1
> INFO    Number of alternate interface descriptors found : 0
> INFO    Number of endpoint descriptors found : 2
> INFO    Configuration descriptor length : 9
> INFO    Configuration descriptor type : 7
> INFO    Configuration descriptor TotalLength : 20
> INFO    Configuration descriptor NumInterfaces : 1
> INFO    Configuration descriptor ConfigurationValue: 1
> INFO    Configuration descriptor string descriptor index : 0
> INFO    Configuration descriptor bmAttributes : c0
> INFO    Device does not support remote wake up
> INFO    Maximum power device requires : 2mA
> INFO    Device is BUS/SELF-POWERED
> INFO    Stop time: 09:53:31
> INFO    Stopping Test [ Other Speed Configuration Test (Configuration Index 0 OtherSpeedConfiguration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_17">OtherSpeedInterfaceDescriptorTest_DeviceAddressed</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Interface Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0)
> 
> INFO    Start time: 09:53:31
> 
> INFO    Bandwidth check passed
> INFO    Testing Interface number : 0 Alternate setting : 0
> INFO    Interface descriptor length : 9
> INFO    Interface descriptor bDescriptorType : 4
> INFO    Interface descriptor bAlternateSetting : 0
> INFO    Interface descriptor bNumEndPoints: 2
> INFO    Interface descriptor bInterfaceClass reserved for assignment by the USB-IF : 8
> INFO    Interface class code indicates [Mass-Storage] Interface
> INFO    Interface descriptor bInterfaceSubClass : 6
> INFO    Interface descriptor bInterfaceProtocol assigned by the USB-IF : 50
> INFO    Interface descriptor iInterface : 0x0
> INFO    Stop time: 09:53:32
> INFO    Stopping Test [ Interface Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_18">OtherSpeedEndpointDescriptorTest_DeviceAddressed</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Endpoint Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0)
> 
> INFO    Start time: 09:53:32
> 
> INFO    Testing Interface number : 0 Alternate setting : 0
> INFO    Endpoint descriptor length : 7
> INFO    Endpoint descriptor type : 5
> INFO    Endpoint Type : Bulk, Number : 1, Direction : IN
> INFO    Endpoint descriptor bmAttributes : 2
> INFO    Endpoint descriptor raw MaxPacketSize : 40
> INFO    Endpoint descriptor interval : 0
> INFO    Endpoint descriptor length : 7
> INFO    Endpoint descriptor type : 5
> INFO    Endpoint Type : Bulk, Number : 2, Direction : OUT
> INFO    Endpoint descriptor bmAttributes : 2
> INFO    Endpoint descriptor raw MaxPacketSize : 40
> INFO    Endpoint descriptor interval : 0
> INFO    Stop time: 09:53:33
> INFO    Stopping Test [ Endpoint Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_19">DeviceQualifierTest_DeviceAddressed</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Device Qualifier Descriptor Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:33
> 
> INFO    Device qualifier length : a
> INFO    Device qualifier type : 6
> INFO    Major version : 2
> INFO    Minor version : 0
> INFO    Device Qualifier device class : 0
> INFO    Device qualifier device subclass : 0
> INFO    Device qualifier device protocol : 0
> INFO    Device qualifier MaxPacketSize0 : 40
> INFO    Device qualifier bNumConfigurations : 1
> INFO    Stop time: 09:53:34
> INFO    Stopping Test [ Device Qualifier Descriptor Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_20">DeviceQualifierTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Device Qualifier Descriptor Test (Configuration Index 0)
> 
> INFO    Start time: 09:53:34
> 
> INFO    Device qualifier length : a
> INFO    Device qualifier type : 6
> INFO    Major version : 2
> INFO    Minor version : 0
> INFO    Device Qualifier device class : 0
> INFO    Device qualifier device subclass : 0
> INFO    Device qualifier device protocol : 0
> INFO    Device qualifier MaxPacketSize0 : 40
> INFO    Device qualifier bNumConfigurations : 1
> INFO    Stop time: 09:53:35
> INFO    Stopping Test [ Device Qualifier Descriptor Test (Configuration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_21">OtherSpeedConfigTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Other Speed Configuration Test (Configuration Index 0 OtherSpeedConfiguration Index 0)
> 
> INFO    Start time: 09:53:35
> 
> INFO    Number of interface descriptors found 1
> INFO    Number of alternate interface descriptors found : 0
> INFO    Number of endpoint descriptors found : 2
> INFO    Configuration descriptor length : 9
> INFO    Configuration descriptor type : 7
> INFO    Configuration descriptor TotalLength : 20
> INFO    Configuration descriptor NumInterfaces : 1
> INFO    Configuration descriptor ConfigurationValue: 1
> INFO    Configuration descriptor string descriptor index : 0
> INFO    Configuration descriptor bmAttributes : c0
> INFO    Device does not support remote wake up
> INFO    Maximum power device requires : 2mA
> INFO    Device is BUS/SELF-POWERED
> INFO    Stop time: 09:53:36
> INFO    Stopping Test [ Other Speed Configuration Test (Configuration Index 0 OtherSpeedConfiguration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_22">OtherSpeedInterfaceDescriptorTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Interface Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0)
> 
> INFO    Start time: 09:53:36
> 
> INFO    Bandwidth check passed
> INFO    Testing Interface number : 0 Alternate setting : 0
> INFO    Interface descriptor length : 9
> INFO    Interface descriptor bDescriptorType : 4
> INFO    Interface descriptor bAlternateSetting : 0
> INFO    Interface descriptor bNumEndPoints: 2
> INFO    Interface descriptor bInterfaceClass reserved for assignment by the USB-IF : 8
> INFO    Interface class code indicates [Mass-Storage] Interface
> INFO    Interface descriptor bInterfaceSubClass : 6
> INFO    Interface descriptor bInterfaceProtocol assigned by the USB-IF : 50
> INFO    Interface descriptor iInterface : 0x0
> INFO    Stop time: 09:53:37
> INFO    Stopping Test [ Interface Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_23">OtherSpeedEndpointDescriptorTest_DeviceConfigured</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Endpoint Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0)
> 
> INFO    Start time: 09:53:37
> 
> INFO    Testing Interface number : 0 Alternate setting : 0
> INFO    Endpoint descriptor length : 7
> INFO    Endpoint descriptor type : 5
> INFO    Endpoint Type : Bulk, Number : 1, Direction : IN
> INFO    Endpoint descriptor bmAttributes : 2
> INFO    Endpoint descriptor raw MaxPacketSize : 40
> INFO    Endpoint descriptor interval : 0
> INFO    Endpoint descriptor length : 7
> INFO    Endpoint descriptor type : 5
> INFO    Endpoint Type : Bulk, Number : 2, Direction : OUT
> INFO    Endpoint descriptor bmAttributes : 2
> INFO    Endpoint descriptor raw MaxPacketSize : 40
> INFO    Endpoint descriptor interval : 0
> INFO    Stop time: 09:53:38
> INFO    Stopping Test [ Endpoint Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td><b><a name="anchor_24">EnumerationTest</a></b></td><td bgcolor="#00ff00" width="15%"><b>Passed</b></td></tr>
> <tr><td colspan="2"><pre>INFO    
> 
> ===============
> 
> 
> 
> Now Starting Test: Enumeration Test (repeat 150 times)
> 
> INFO    Start time: 09:53:38
> 
> INFO    Device speed is High
> INFO    Stop time: 09:54:14
> INFO    Stopping Test [ Enumeration Test (repeat 150 times):
>      Number of: Fails (0); Aborts (0); Warnings (0) ]
> 
> 
> 
> </pre></td></tr>
> <tr><td colspan="2"><b>Summary</b></td></tr>
> <tr><td colspan="2"><pre>INFO    Summary Log Counts [ Fails (0); Aborts (2); Warnings (2) ]
> </pre></td></tr>
> </tbody></table></body></html>


-- 
B.Walter <bernd_at_bwct.de> http://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
Received on Mon Aug 31 2009 - 17:07:49 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:54 UTC