Re: current sparc buildkernel error

From: Anton Shterenlikht <mexas_at_bristol.ac.uk>
Date: Tue, 8 Dec 2009 14:17:51 +0000
On Tue, Dec 08, 2009 at 02:03:07PM +0100, Gheorghe Ardelean wrote:
> On Tue, 8 Dec 2009, Anton Shterenlikht wrote:
> 
> > On Mon, Dec 07, 2009 at 04:32:23PM +0100, Marius Strobl wrote:
> >> On Mon, Dec 07, 2009 at 10:05:36AM +0000, Anton Shterenlikht wrote:
> >>> On FreeBSD 8.0-RELEASE sparc64
> >>>
> >>> I've successfully build current world, but on buildkernel I get:
> >>>
> >>> cc -c -O -pipe  -std=c99 -g -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions -nostdinc  -I. -I/usr/src/sys -I/usr/src/sys/contrib/altq -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common -finline-limit=15000 --param inline-unit-growth=100 --param large-function-growth=1000  -mcmodel=medany -msoft-float -ffreestanding -fstack-protector -Werror  /usr/src/sys/sparc64/sparc64/trap.c
> >>> /usr/src/sys/sparc64/sparc64/trap.c: In function 'syscall':
> >>> /usr/src/sys/sparc64/sparc64/trap.c:561: error: dereferencing pointer to incomplete type
> >>> *** Error code 1
> >>>
> >>
> >> This should be fixed in r200215. AFAICT it was only exposed by
> >> UP kernel builds.
> >
> > I updated the sources, but still get the same error:
> >
> > cc -c -O -pipe  -std=c99 -g -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions -nostdinc  -I. -I/usr/src/sys -I/usr/src/sys/contrib/altq -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common -finline-limit=15000 --param inline-unit-growth=100 --param large-function-growth=1000  -mcmodel=medany -msoft-float -ffreestanding -fstack-protector -Werror  /usr/src/sys/sparc64/sparc64/trap.c
> > /usr/src/sys/sparc64/sparc64/trap.c: In function 'syscall':
> > /usr/src/sys/sparc64/sparc64/trap.c:561: error: dereferencing pointer to incomplete type
> > *** Error code 1
> > 1 error
> >
> > This is on FreeBSD 8.0-RELEASE sparc64.
> >
> > buildworld stage went fine.
> >
> > What is r200215? I tried to search for it, but got nothing.
> 
> This is the SVN revision of the file containing the fix.
> You can explore via the WEB interface the repository and check for 
> changes and change logs:
> 
> http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/sparc64/sparc64/trap.c

Gheorghe, thank you

I got the kernel built, but only after I enabled SMP.
As this is US-IIIi UP box, it would make more sense
to disable this option, but then I don't know what
effect it would cause. In other words, is there
a negative effect of running SMP kernel on a UP
machine?

The full kernel config file is below.

many thanks
anton

#
# $FreeBSD: src/sys/sparc64/conf/GENERIC,v 1.160 2009/10/13 19:02:03 jhb Exp $

cpu		SUN4U
ident		DALET

# To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		# Default places to look for devices.

# Use the following to compile in values accessible to the kernel
# through getenv() (or kenv(1) in userland). The format of the file
# is 'variable=value', see kenv(1)
#
# env		"GENERIC.env"

makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols

# Platforms supported
#	At this time all platforms are supported, as-is.

options 	SCHED_4BSD		# 4BSD scheduler
#options 	PREEMPTION		# Enable kernel thread preemption
options 	INET			# InterNETworking
options 	INET6			# IPv6 communications protocols
options 	SCTP			# Stream Control Transmission Protocol
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
options 	MD_ROOT			# MD is a potential root device
options 	NFSCLIENT		# Network Filesystem Client
options 	NFSSERVER		# Network Filesystem Server
options 	NFSLOCKD		# Network Lock Manager
options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
#options 	MSDOSFS			# MSDOS Filesystem
options 	CD9660			# ISO 9660 Filesystem
options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_PART_GPT		# GUID Partition Tables.
options 	GEOM_LABEL		# Provides labelization
options 	COMPAT_43TTY		# BSD 4.3 TTY compat (sgtty)
options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
options 	COMPAT_FREEBSD6		# Compatible with FreeBSD6
options 	COMPAT_FREEBSD7		# Compatible with FreeBSD7
options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	STACK			# stack(9) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	P1003_1B_SEMAPHORES	# POSIX-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
options 	AUDIT			# Security event auditing
options 	MAC			# TrustedBSD MAC Framework

# Debugging for use in -current
options 	KDB			# Enable kernel debugger support.
options 	DDB			# Support DDB.
options 	GDB			# Support remote GDB.
options 	INVARIANTS		# Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	# Extra sanity checks of internal structures, required by INVARIANTS
options 	WITNESS			# Enable checks to detect deadlocks and cycles
options 	WITNESS_SKIPSPIN	# Don't run witness on spinlocks for speed

# Make an SMP-capable kernel by default
options 	SMP			# Symmetric MultiProcessor Kernel

# Standard busses
device		ebus
device		isa
device		pci
device		sbus
device		central
device		fhc

# Floppy drives
#device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
device		atapicd		# ATAPI CDROM drives
#device		atapifd		# ATAPI floppy drives
#device		atapist		# ATAPI tape drives
#	Do NOT enable ATA_STATIC_ID -- cmd646 controller will be !ata2!,
#	and you will not mount an ATA /.
#options 	ATA_STATIC_ID	# Static device numbering

# SCSI Controllers
#device		ahc		# AHA2940 and onboard AIC7xxx devices
#options 	AHC_ALLOW_MEMIO	# Attempt to use memory mapped I/O
#options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
#device		isp		# Qlogic family
#device		ispfw		# Firmware module for Qlogic host adapters
#device		mpt		# LSI-Logic MPT-Fusion
#device		sym		# NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D
#device		esp		# NCR53c9x (FEPS/FAS366)

# SCSI peripherals
#device		scbus		# SCSI bus (required for SCSI)
#device		ch		# SCSI media changers
#device		da		# Direct Access (disks)
#device		sa		# Sequential Access (tape etc)
#device		cd		# CD
#device		pass		# Passthrough device (direct SCSI access)
#device		ses		# SCSI Environmental Services (and SAF-TE)

# RAID controllers
#device		amr		# AMI MegaRAID
#device		mlx		# Mylex DAC960 family

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		kbdmux		# keyboard multiplexer

# syscons is the default console driver, resembling an SCO console
device		sc
device		creator		# Creator, Creator3D and Elite3D framebuffers
device		machfb		# ATI Mach64 framebuffers
device		splash		# Splash screen and screen saver support
options 	KBD_INSTALL_CDEV # install a CDEV entry in /dev

# Builtin hardware
device		auxio		# auxiliary I/O device
device		eeprom		# eeprom (really a front-end for the MK48Txx)
device		mk48txx		# Mostek MK48Txx clocks
device		rtc		# rtc (really a front-end for the MC146818)
device		mc146818	# Motorola MC146818 and compatible clocks

# Serial (COM) ports
device		puc		# Multi-channel uarts
device		scc		# Serial communications controllers.
device		uart		# Multi-uart driver

# Parallel port
#device		ppc
#device		ppbus		# Parallel port bus (required)
#device		lpt		# Printer
#device		plip		# TCP/IP over parallel
#device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# PCI Ethernet NICs.
#device		de		# DEC/Intel DC21x4x (``Tulip'')
#device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card
#device		ixgb		# Intel PRO/10GbE Ethernet Card
#device		le		# AMD Am7900 LANCE and Am79C9xx PCnet
#device		ti		# Alteon Networks Tigon I/II gigabit Ethernet
#device		txp		# 3Com 3cR990 (``Typhoon'')
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
#device		bfe		# Broadcom BCM440x 10/100 Ethernet
device		bge		# Broadcom BCM570xx Gigabit Ethernet
#device		cas		# Sun Cassini/Cassini+ and NS DP83065 Saturn
#device		dc		# DEC/Intel 21143 and various workalikes
#device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
#device		gem		# Sun GEM/Sun ERI/Apple GMAC
#device		hme		# Sun HME (Happy Meal Ethernet)
#device		nge		# NatSemi DP83820 gigabit Ethernet
#device		pcn		# AMD Am79C97x PCI 10/100 (precedence over 'le')
#device		re		# RealTek 8139C+/8169/8169S/8110S
#device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
#device		sk		# SysKonnect SK-984x & SK-982x gigabit Ethernet
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		stge		# Sundance/Tamarack TC9021 gigabit Ethernet
#device		tl		# Texas Instruments ThunderLAN
#device		tx		# SMC EtherPower II (83c170 ``EPIC'')
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
#device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# Wireless NIC cards
#device		wlan		# 802.11 support
#options 	IEEE80211_DEBUG	# enable debug msgs
#options 	IEEE80211_AMPDU_AGE	# age frames in AMPDU reorder q's
#options 	IEEE80211_SUPPORT_MESH	# enable 802.11s D3.0 support
#device		wlan_wep	# 802.11 WEP support
#device		wlan_ccmp	# 802.11 CCMP support
#device		wlan_tkip	# 802.11 TKIP support
#device		wlan_amrr	# AMRR transmit rate control algorithm
#device		ath		# Atheros pci/cardbus NIC's
#device		ath_hal		# Atheros HAL (Hardware Access Layer)
#options 	AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
#device		ath_rate_sample	# SampleRate tx rate control for ath

# Pseudo devices.
device		loop		# Network loopback
device		random		# Entropy device
device		ether		# Ethernet support
device		tun		# Packet tunnel.
device		pty		# BSD-style compatibility pseudo ttys
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)
device		firmware	# firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf		# Berkeley packet filter

 
-- 
Anton Shterenlikht
Room 2.6, Queen's Building
Mech Eng Dept
Bristol University
University Walk, Bristol BS8 1TR, UK
Tel: +44 (0)117 331 5944
Fax: +44 (0)117 929 4423
Received on Tue Dec 08 2009 - 13:17:57 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:58 UTC