Hi, some time ago I noticed that there's a problem with the new arp implementation - proxy arp was somehow not working when mpd is involved. I decided to try this out again assuming it was fixed for the release...unfortunately the problem is still there... Here are the last few lines of the mpd output: [B-1] IPCP: state change Ack-Rcvd --> Opened [B-1] IPCP: LayerUp [B-1] 192.168.10.1 -> 192.168.10.50 [B-1] IFACE: Connecting tcpmssfix [B-1] IFACE: Add address 192.168.10.1/32->192.168.10.50 to ng0 [B-1] exec: /usr/sbin/arp -S 192.168.10.50 0:e0:28:62:e:9 pub [B-1] system: command "/usr/sbin/arp" returned 256 [B-1] IFACE: Up event [B-1] IFACE: idle-timeout: 1800 seconds [B-1] IFACE: Change interface flags: -0 +1 there this is mpd.conf: startup: default: load pptp_server pptp_server: set ippool add pool1 192.168.10.50 192.168.10.99 create bundle template B set iface enable proxy-arp log +iface2 set iface idle 1800 set iface enable tcpmssfix set ipcp yes vjcomp set ipcp ranges 192.168.10.1/32 ippool pool1 set ipcp dns 192.168.10.1 set bundle enable compression set ccp yes mppc set mppc yes e40 set mppc yes e128 set mppc yes stateless create link template L pptp set link action bundle B set link enable multilink set link yes acfcomp protocomp set link no pap chap set link enable chap set link keep-alive 10 60 set link mtu 1460 set pptp self pub.ip.add.res set link enable incoming this is probably the most common VPN setup and it was working fine with 7.2-STABLE but after I upgraded to 8-STABLE it broke up... Is there a workaround or a plan to fix this? Or should I just go back to RELENG_7? thank you. P.S. this is discussed in the forums as well: http://forums.freebsd.org/showthread.php?t=8427 ----------------------------------------------------------------- Участвай в онлайн анкетата на iZone.bg и спечели един от 5те нетбука Acer! http://www.izone.bg/6/index.htmlReceived on Wed Dec 09 2009 - 18:01:03 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:58 UTC