Re: ifconfig_lo0_alias0 does not work any more on 9-CURRENT - solved

From: Vladislav V. Prodan <universite_at_ukr.net>
Date: Wed, 09 Dec 2009 22:16:04 +0200
Vladimir Grebenschikov writes:
> Hi 

> Looks like now it is required to add 'inet ' prefix to ifconfig lines,
> for os <= 8.0 it was not required, although 

> corrected line:
> ifconfig_lo0_alias0="inet 127.0.0.2/32"

And I on the contrary
not work:
ifconfig_re0="inet 10.0.0.1 netmask 255.255.255.0"
work:
ifconfig_re0_alias0="inet 192.168.0.1 netmask 255.255.255.0"




>> After upgrade RELENG_8 -> 9-CURRENT  following line in rc.con does not
>> work any more for me. (after boot no alias address on loop-back
>> interface).

>> ifconfig_lo0_alias0="127.0.0.2/32"

>> console output while is usual, without errors, but does not shows
>> required address:

>> ---
>> Starting Network: lo0 em0.
>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>>         options=3<RXCSUM,TXCSUM>
>>         inet 127.0.0.1 netmask 0xff000000
>> em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>         options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
>>         ether 00:15:58:82:36:1a
>>         media: Ethernet autoselect
>>         status: no carrier
>> ---

>> Any ideas what the reason of such behaviour ?
Received on Wed Dec 09 2009 - 19:16:17 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:58 UTC