I updated my 8-CURRENT and now system freeze shortly after boot (~0.5-3 minutes). I see following messages in console: Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4 ts_status 0x0 Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3 ts_status 0x0 Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4 ts_status 0x0 Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4 ts_status 0x0 Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3 ts_status 0x0 Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4 ts_status 0x0 Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4 ts_status 0x0 Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3 ts_status 0x0 Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4 ts_status 0x0 ... much time, then system freeze. Before last update I was never see those messages. Now I rolled back to HEAD sources with date=2009.01.01, and all seems OK. ###################################### "uname -a" output: FreeBSD user 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Sun Feb 1 13:53:48 MSK 2009 user_at_user:/usr/obj/usr/src/sys/GX710 amd64 ###################################### "dmesg" output: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Sun Feb 1 13:53:48 MSK 2009 cache_at_cache:/usr/obj/usr/src/sys/GX710.8 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-64 (798.01-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x60f81 Stepping = 1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> Cores per package: 2 usable memory = 4284284928 (4085 MB) avail memory = 4120625152 (3929 MB) ACPI APIC Table: <MSI_NB MEGABOOK> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.1> irqs 0-23 on motherboard wlan: mac acl policy registered kbd1 at kbdmux0 kqemu version 0x00010400 kqemu: KQEMU installed, max_locked_mem=2091936kB. acpi0: <MSI_NB MEGABOOK> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff0001678800) [EmbeddedControl] [20070320] ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320] **** Exception AE_NOT_EXIST during execution of method [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880) Method Execution Stack: Method [_STA] executing: MBTS Local Variables for method [_STA]: Local0: 0 <Null Object> Local1: 0 <Null Object> Local2: 0 <Null Object> Local3: 0 <Null Object> Local4: 0 <Null Object> Local5: 0 <Null Object> Local6: 0 <Null Object> Local7: 0 <Null Object> Arguments for Method [_STA]: (0 arguments defined, max concurrency = 0) Arg0: 0 <Null Object> Arg1: 0 <Null Object> Arg2: 0 <Null Object> Arg3: 0 <Null Object> Arg4: 0 <Null Object> Arg5: 0 <Null Object> Arg6: 0 <Null Object> ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff0001678800) [EmbeddedControl] [20070320] ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320] **** Exception AE_NOT_EXIST during execution of method [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880) Method Execution Stack: Method [_STA] executing: MBTS Local Variables for method [_STA]: Local0: 0 <Null Object> Local1: 0 <Null Object> Local2: 0 <Null Object> Local3: 0 <Null Object> Local4: 0 <Null Object> Local5: 0 <Null Object> Local6: 0 <Null Object> Local7: 0 <Null Object> Arguments for Method [_STA]: (0 arguments defined, max concurrency = 0) Arg0: 0 <Null Object> Arg1: 0 <Null Object> Arg2: 0 <Null Object> Arg3: 0 <Null Object> Arg4: 0 <Null Object> Arg5: 0 <Null Object> Arg6: 0 <Null Object> ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff0001678800) [EmbeddedControl] [20070320] ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320] **** Exception AE_NOT_EXIST during execution of method [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880) Method Execution Stack: Method [_STA] executing: MBTS Local Variables for method [_STA]: Local0: 0 <Null Object> Local1: 0 <Null Object> Local2: 0 <Null Object> Local3: 0 <Null Object> Local4: 0 <Null Object> Local5: 0 <Null Object> Local6: 0 <Null Object> Local7: 0 <Null Object> Arguments for Method [_STA]: (0 arguments defined, max concurrency = 0) Arg0: 0 <Null Object> Arg1: 0 <Null Object> Arg2: 0 <Null Object> Arg3: 0 <Null Object> Arg4: 0 <Null Object> Arg5: 0 <Null Object> Arg6: 0 <Null Object> ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff0001678800) [EmbeddedControl] [20070320] ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320] **** Exception AE_NOT_EXIST during execution of method [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880) Method Execution Stack: Method [_STA] executing: MBTS Local Variables for method [_STA]: Local0: 0 <Null Object> Local1: 0 <Null Object> Local2: 0 <Null Object> Local3: 0 <Null Object> Local4: 0 <Null Object> Local5: 0 <Null Object> Local6: 0 <Null Object> Local7: 0 <Null Object> Arguments for Method [_STA]: (0 arguments defined, max concurrency = 0) Arg0: 0 <Null Object> Arg1: 0 <Null Object> Arg2: 0 <Null Object> Arg3: 0 <Null Object> Arg4: 0 <Null Object> Arg5: 0 <Null Object> Arg6: 0 <Null Object> ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff0001678800) [EmbeddedControl] [20070320] ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320] **** Exception AE_NOT_EXIST during execution of method [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880) Method Execution Stack: Method [_STA] executing: MBTS Local Variables for method [_STA]: Local0: 0 <Null Object> Local1: 0 <Null Object> Local2: 0 <Null Object> Local3: 0 <Null Object> Local4: 0 <Null Object> Local5: 0 <Null Object> Local6: 0 <Null Object> Local7: 0 <Null Object> Arguments for Method [_STA]: (0 arguments defined, max concurrency = 0) Arg0: 0 <Null Object> Arg1: 0 <Null Object> Arg2: 0 <Null Object> Arg3: 0 <Null Object> Arg4: 0 <Null Object> Arg5: 0 <Null Object> Arg6: 0 <Null Object> ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff0001678800) [EmbeddedControl] [20070320] ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320] **** Exception AE_NOT_EXIST during execution of method [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880) Method Execution Stack: Method [_STA] executing: MBTS Local Variables for method [_STA]: Local0: 0 <Null Object> Local1: 0 <Null Object> Local2: 0 <Null Object> Local3: 0 <Null Object> Local4: 0 <Null Object> Local5: 0 <Null Object> Local6: 0 <Null Object> Local7: 0 <Null Object> Arguments for Method [_STA]: (0 arguments defined, max concurrency = 0) Arg0: 0 <Null Object> Arg1: 0 <Null Object> Arg2: 0 <Null Object> Arg3: 0 <Null Object> Arg4: 0 <Null Object> Arg5: 0 <Null Object> Arg6: 0 <Null Object> ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff0001678800) [EmbeddedControl] [20070320] ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320] **** Exception AE_NOT_EXIST during execution of method [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880) Method Execution Stack: Method [_STA] executing: MBTS Local Variables for method [_STA]: Local0: 0 <Null Object> Local1: 0 <Null Object> Local2: 0 <Null Object> Local3: 0 <Null Object> Local4: 0 <Null Object> Local5: 0 <Null Object> Local6: 0 <Null Object> Local7: 0 <Null Object> Arguments for Method [_STA]: (0 arguments defined, max concurrency = 0) Arg0: 0 <Null Object> Arg1: 0 <Null Object> Arg2: 0 <Null Object> Arg3: 0 <Null Object> Arg4: 0 <Null Object> Arg5: 0 <Null Object> Arg6: 0 <Null Object> ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000167b880), AE_NOT_EXIST acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cff00000 (3) failed ACPI HPET table warning: Sequence is non-zero (2) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x6> port 0x62,0x66 on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xd0000000-0xdfffffff,0xfd6f0000-0xfd6fffff irq 18 at device 0.0 on pci1 acpi_video0: <ACPI video extension> on vgapci0 hdac0: <ATI (Unknown) High Definition Audio Controller> mem 0xfd6ec000-0xfd6effff irq 19 at device 0.1 on pci1 hdac0: HDA Driver Revision: 20081226_0122 hdac0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ath0: <Atheros 5424/2424> mem 0xfd7f0000-0xfd7fffff irq 16 at device 0.0 on pci2 ath0: [ITHREAD] ath0: WARNING: using obsoleted if_watchdog interface ath0: mac 14.2 phy 7.0 radio 10.2 pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci5: <ACPI PCI bus> on pcib4 re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe2ff000-0xfe2fffff irq 19 at device 0.0 on pci5 re0: turning off MSI enable bit. re0: Chip rev. 0x38000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:1d:92:4b:18:11 re0: [FILTER] atapci0: <ATI IXP600 SATA300 controller> port 0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem 0xfd5ff800-0xfd5ffbff irq 22 at device 18.0 on pci0 atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 4 ports PM supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfd5fe000-0xfd5fefff irq 16 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfd5fd000-0xfd5fdfff irq 17 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ohci2: <OHCI (generic) USB controller> mem 0xfd5fc000-0xfd5fcfff irq 18 at device 19.2 on pci0 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: <OHCI (generic) USB controller> on ohci2 usb2: USB revision 1.0 uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ohci3: <OHCI (generic) USB controller> mem 0xfd5fb000-0xfd5fbfff irq 17 at device 19.3 on pci0 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: <OHCI (generic) USB controller> on ohci3 usb3: USB revision 1.0 uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ohci4: <OHCI (generic) USB controller> mem 0xfd5fa000-0xfd5fafff irq 18 at device 19.4 on pci0 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: <OHCI (generic) USB controller> on ohci4 usb4: USB revision 1.0 uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfd5ff000-0xfd5ff0ff irq 19 at device 19.5 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb5: EHCI version 1.0 usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4 usb5: <EHCI (generic) USB 2.0 controller> on ehci0 usb5: USB revision 2.0 uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5 uhub5: 10 ports with 10 removable, self powered ugen0: <vendor 0x0402 USB2.0 Camera, class 0/0, rev 2.00/1.00, addr 2> on uhub5 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] hdac1: <ATI SB600 High Definition Audio Controller> mem 0xfd5f4000-0xfd5f7fff irq 16 at device 20.2 on pci0 hdac1: HDA Driver Revision: 20081226_0122 hdac1: [ITHREAD] isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci6: <ACPI PCI bus> on pcib5 cbb0: <PCI-CardBus Bridge> irq 20 at device 4.0 on pci6 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [FILTER] pci6: <base peripheral, SD host controller> at device 4.2 (no driver attached) pci6: <bridge> at device 4.3 (no driver attached) fwohci0: <1394 Open Host Controller Interface> mem 0xfe3fd000-0xfe3fdfff,0xfe3ff000-0xfe3ff7ff irq 20 at device 4.4 on pci6 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:dc:10:00:af:43:34:01 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xc7a08000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:dc:10:43:34:01 fwe0: Ethernet address: 02:dc:10:43:34:01 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:dc:10:00:af:43:34:01 _at_ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode k8temp0: <AMD K8 Thermal Sensors> on hostb4 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: CLK_VAL field overlaps THT_EN bit device_attach: acpi_throttle0 attach returned 6 powernow0: <PowerNow! K8> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ugen1: <Formosa21 SnowflakeEmulation, class 0/0, rev 2.00/1.30, addr 2> on uhub3 ubt0: <vendor 0x0db0 product 0xa97a, class 224/1, rev 2.00/31.64, addr 3> on uhub3 ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=49; nframes=10, buffer size=490 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acd0: DVDR <Optiarc DVD RW AD-7530B/NX02> at ata0-master UDMA33 ad4: 238475MB <WDC WD2500BEVS-00UST0 01.01A01> at ata2-master SATA150 hdac0: HDA Codec #0: ATI R6xx HDMI pcm0: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0 hdac1: HDA Codec #0: Realtek ALC888 hdac1: HDA Codec #1: Lucent/Agere Systems (Unknown) pcm1: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac1 pcm2: <HDA Realtek ALC888 PCM #1 Digital> at cad 0 nid 1 on hdac1 GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s). acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 SMP: AP CPU #1 Launched! cd0 at ata0 bus 0 target 0 lun 0 cd0: <Optiarc DVD RW AD-7530B NX02> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad4s1a This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ WARNING: ZFS is considered to be an experimental feature in FreeBSD. ZFS filesystem version 13 ZFS storage pool version 13 wlan0: Ethernet address: 00:15:af:54:f6:25 wlan0: link state changed to UP ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x1, OCF=0x5. Timeout ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15) acpi_ec0: wait timed out (response), forcing polled mode ###################################### "pciconf -lv" output: hostb0_at_pci0:0:0:0: class=0x060000 card=0x42cd1462 chip=0x79101002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' class = bridge subclass = HOST-PCI pcib1_at_pci0:0:2:0: class=0x060400 card=0x42cd1462 chip=0x79131002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc' class = bridge subclass = PCI-PCI pcib2_at_pci0:0:4:0: class=0x060400 card=0x42cd1462 chip=0x79141002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc' class = bridge subclass = PCI-PCI pcib3_at_pci0:0:6:0: class=0x060400 card=0x42cd1462 chip=0x79161002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc' class = bridge subclass = PCI-PCI pcib4_at_pci0:0:7:0: class=0x060400 card=0x42cd1462 chip=0x79171002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc' class = bridge subclass = PCI-PCI atapci0_at_pci0:0:18:0: class=0x01018f card=0x42cd1462 chip=0x43801002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 Serial ATA Controller' class = mass storage subclass = ATA ohci0_at_pci0:0:19:0: class=0x0c0310 card=0x42cd1462 chip=0x43871002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 USB Controller (OHCI0)' class = serial bus subclass = USB ohci1_at_pci0:0:19:1: class=0x0c0310 card=0x42cd1462 chip=0x43881002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 USB Controller (OHCI1)' class = serial bus subclass = USB ohci2_at_pci0:0:19:2: class=0x0c0310 card=0x42cd1462 chip=0x43891002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 USB Controller (OHCI2)' class = serial bus subclass = USB ohci3_at_pci0:0:19:3: class=0x0c0310 card=0x42cd1462 chip=0x438a1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 USB Controller (OHCI3)' class = serial bus subclass = USB ohci4_at_pci0:0:19:4: class=0x0c0310 card=0x42cd1462 chip=0x438b1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 USB Controller (OHCI4)' class = serial bus subclass = USB ehci0_at_pci0:0:19:5: class=0x0c0320 card=0x42cd1462 chip=0x43861002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 USB Controller (EHCI)' class = serial bus subclass = USB none0_at_pci0:0:20:0: class=0x0c0500 card=0x42cd1462 chip=0x43851002 rev=0x14 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 SMBUS Controller' class = serial bus subclass = SMBus atapci1_at_pci0:0:20:1: class=0x01018a card=0x42cd1462 chip=0x438c1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 ATA Controller' class = mass storage subclass = ATA hdac1_at_pci0:0:20:2: class=0x040300 card=0x42cd1462 chip=0x43831002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 High Definition Audio Controller' class = multimedia subclass = HDA isab0_at_pci0:0:20:3: class=0x060100 card=0x42cd1462 chip=0x438d1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'IXP SB600 PCI to LPC Bridge' class = bridge subclass = PCI-ISA pcib5_at_pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc' device = 'IXP SB600 PCI to PCI Bridge' class = bridge subclass = PCI-PCI hostb1_at_pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = '(K8) Athlon 64/Opteron HyperTransport Technology Configuration' class = bridge subclass = HOST-PCI hostb2_at_pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = '(K8) Athlon 64/Opteron Address Map' class = bridge subclass = HOST-PCI hostb3_at_pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = '(K8) Athlon 64/Opteron DRAM Controller' class = bridge subclass = HOST-PCI hostb4_at_pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = '(K8) Athlon 64/Opteron Miscellaneous Control' class = bridge subclass = HOST-PCI vgapci0_at_pci0:1:0:0: class=0x030000 card=0x42cd1462 chip=0x95811002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' class = display subclass = VGA hdac0_at_pci0:1:0:1: class=0x040300 card=0xaa081462 chip=0xaa081002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' class = multimedia subclass = HDA ath0_at_pci0:2:0:0: class=0x020000 card=0x10261a3b chip=0x001c168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'AR5006 family 802.11abg Wireless NIC' class = network subclass = ethernet re0_at_pci0:5:0:0: class=0x020000 card=0x42cd1462 chip=0x816810ec rev=0x01 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network subclass = ethernet cbb0_at_pci0:6:4:0: class=0x060700 card=0x42cd1462 chip=0x71341217 rev=0x21 hdr=0x02 vendor = 'O2 Micro Inc' device = 'OZ711MP1/MS1 MemoryCardBus Controller 6-in-1' class = bridge subclass = PCI-CardBus none1_at_pci0:6:4:2: class=0x080500 card=0x42cd1462 chip=0x71201217 rev=0x01 hdr=0x00 vendor = 'O2 Micro Inc' device = 'Unknown device O2Micro Integrated MMC/SD controller' class = base peripheral subclass = SD host controller none2_at_pci0:6:4:3: class=0x068000 card=0x42cd1462 chip=0x71301217 rev=0x01 hdr=0x00 vendor = 'O2 Micro Inc' device = 'OZ711M3 Integrated MMC/SD/MS/xD/SM Controller' class = bridge fwohci0_at_pci0:6:4:4: class=0x0c0010 card=0x42cd1462 chip=0x00f71217 rev=0x02 hdr=0x00 vendor = 'O2 Micro Inc' device = '0x00f71217 1394 Open Host Controller Interface' class = serial bus subclass = FireWireReceived on Mon Feb 02 2009 - 01:36:14 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:41 UTC