Re: ath driver (?) lock system after last update

Output of 'sysctl dev.ath':

dev.ath.0.%desc: Atheros 5424/2424
dev.ath.0.%driver: ath
dev.ath.0.%location: slot=0 function=0
dev.ath.0.%pnpinfo: vendor=0x168c device=0x001c subvendor=0x1a3b 
subdevice=0x1026 class=0x020000
dev.ath.0.%parent: pci2
dev.ath.0.smoothing_rate: 95
dev.ath.0.sample_rate: 10
dev.ath.0.sample_stats: 0
dev.ath.0.countrycode: 0
dev.ath.0.regdomain: 96
dev.ath.0.slottime: 20
dev.ath.0.acktimeout: 48
dev.ath.0.ctstimeout: 48
dev.ath.0.softled: 0
dev.ath.0.ledpin: 0
dev.ath.0.ledon: 0
dev.ath.0.ledidle: 2700
dev.ath.0.txantenna: 0
dev.ath.0.rxantenna: 2
dev.ath.0.diversity: 1
dev.ath.0.txintrperiod: 5
dev.ath.0.diag: 0
dev.ath.0.tpscale: 0
dev.ath.0.tpc: 0
dev.ath.0.tpack: 63
dev.ath.0.tpcts: 63
dev.ath.0.rfsilent: 1
dev.ath.0.rfkill: 1
dev.ath.0.intmit: 1
dev.ath.0.monpass: 24

I not changed sysctl setting for ath0 because of fine forking with default 
settings on early drivers.

 > and how your card is configured.
What it means? Wireless network related rc.conf settings?
if_up_delay="1"
wlans_ath0=wlan0
ifconfig_wlan0="WPA DHCP"

I use FreeBSD 7.1 box with Atheros wi-fi card (don't remember exact model, can 
see later if it need) as wireless AP (bridge).


Sam Leffler пишет:
> Subscriber wrote:
>> I updated my 8-CURRENT and now system freeze shortly after boot (~0.5-3
>> minutes). I see following messages in console:
>>
>> Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4 
>> ts_status 0x0
>> Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3 
>> ts_status 0x0
>> Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4 
>> ts_status 0x0
>> Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4 
>> ts_status 0x0
>> Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3 
>> ts_status 0x0
>> Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4 
>> ts_status 0x0
>> Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4 
>> ts_status 0x0
>> Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3 
>> ts_status 0x0
>> Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4 
>> ts_status 0x0
>> ...
>>
>> much time, then system freeze. Before last update I was never see 
>> those messages.
>> Now I rolled back to HEAD sources with date=2009.01.01, and all seems OK.
> 
> 
>> ath0: <Atheros 5424/2424> mem 0xfd7f0000-0xfd7fffff irq 16 at device 
>> 0.0 on pci2
>> ath0: [ITHREAD]
>> ath0: WARNING: using obsoleted if_watchdog interface
>> ath0: mac 14.2 phy 7.0 radio 10.2
> 
> I need to see the output of sysctl dev.ath.0 and how your card is 
> configured.
> 
>    Sam
> 
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
> 
>