Re: gstripe performance oddity

im already doing what you suggest.  here's a simple sample of  
experiments which probably better describe what im seeing:

-------------<snip>--------------

ca-sbox-2# foreach i (0 1)
foreach? dd if=/dev/zero of=/dev/da$i bs=512k count=1024 &
foreach? end
[1] 5402
[2] 5403
ca-sbox-2# 1024+0 records in
1024+0 records out
536870912 bytes transferred in 4.262723 secs (125945532 bytes/sec)
1024+0 records in
1024+0 records out
536870912 bytes transferred in 4.272499 secs (125657357 bytes/sec)

ca-sbox-2# gstripe create -s 262144 d0 /dev/da{0,1}
ca-sbox-2# dd if=/dev/zero of=/dev/stripe/d0 bs=512k count=4096
4096+0 records in
4096+0 records out
2147483648 bytes transferred in 34.124683 secs (62930508 bytes/sec)

ca-sbox-2# newfs /dev/stripe/d0 > /dev/null
ca-sbox-2# mount /dev/stripe/d0 /mnt
ca-sbox-2# dd if=/dev/zero of=/mnt/bigfile bs=512k count=4096 && /usr/ 
bin/time sync
4096+0 records in
4096+0 records out
2147483648 bytes transferred in 11.081184 secs (193795502 bytes/sec)
         0.06 real         0.00 user         0.04 sys

# sysctl kern.geom
kern.geom.collectstats: 1
kern.geom.debugflags: 0
kern.geom.label.debug: 0
kern.geom.stripe.fast_failed: 0
kern.geom.stripe.maxmem: 13107200
kern.geom.stripe.fast: 1
kern.geom.stripe.debug: 0

-----------<snip>-----------

- j

On Jan 1, 2009, at 10:21 PM, Maxim Sobolev wrote:

> Joel Jacobson wrote:
>> i tried sending this to freebsd-geom but got no response, so i'll  
>> try a higher traffic superset list...
>> i have a bit of a weird issue, which i suspect is a configuration  
>> problem, and was looking for a little advice.  i have an LSI JBOD  
>> box with a bunch of SAS drives that i would like to gstripe  
>> together.  each drive individually seems to be able to do about 80  
>> MB/sec streaming write, and doing parallel dd's gives me the 160 MB/ 
>> sec i would expect.  if i gstripe them together with a 256k stripe  
>> width, i only see 80 MB/sec, though.
>> if, however, i newfs/mount it as ufs and then dd myself a big file,  
>> that gets me about 120-130 MB/sec.
>> why does mounting matter?
>
> You will see dd write speed increase on stripe only if you are using  
> block size (bs=XX) larger than stripe size, so that you should try  
> dd bs=512k or something and see if it helps.
>
> -Maxim