Mon, Jan 12, 2009 at 04:28:12PM -0500, Rohit Tripathi wrote: > I'm running current and after many failed attempts to setup my Novatel > U727, I'm posting here with whatever information could be of interest. > > When the modem is plugged in: > > umass0: <Novatel Wireless Inc. Novatel Wireless CDMA, class 0/0, rev 1.10/0.00, > addr 2> on uhub3 > cd0 at umass-sim0 bus 0 target 0 lun 0 > cd0: <Novatel Mass Storage 1.00> Removable CD-ROM SCSI-2 device > cd0: 1.000MB/s transfers > cd0: Attempt to query device size failed: NOT READY, Medium not present It is not the ucom endpoint -- it is some mass-storage endpoint that your modem seem to implement too. Or you showed us not all dmesg parts that are related to your CDMA modem. Do you have /dev/cuaU* devices? For the reference, mine CDMA modem attaches with the following dmesg (it's not U727, but it is CDMA modem that is supported by ucom): ----- ucom0: <CMOTECH CO., LTD. CMOTECH CDMA Technologies, class 2/0, rev 2.00/0.00, addr 2> on uhub5 ucom0: iclass 2/2 ucom0: data interface 1, has CM over data, has break ucom0: status change notification available ---- So, the basic questions are: - had you compiled-in/kldloaded the ucom module? - do you have ucom-related messages in dmesg? - you might also need modules 'uplcom' and/or 'umodem' -- try them. -- Eygene _ ___ _.--. # \`.|\..----...-'` `-._.-'_.-'` # Remember that it is hard / ' ` , __.--' # to read the on-line manual )/' _/ \ `-_, / # while single-stepping the kernel. `-'" `"\_ ,_.-;_.-\_ ', fsc/as # _.-'_./ {_.' ; / # -- FreeBSD Developers handbook {_.-``-' {_/ #Received on Tue Jan 13 2009 - 07:50:18 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:40 UTC