acpi_throttle1: failed to attach P_CNT

After last update I have in dmesg

acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6

When I build somesing - laptop shutdown, because CPU temp > 105 Celsius

HP# uname -a
FreeBSD HP.lissyara.su 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Thu Jan 22 
19:49:57 MSK 2009     root_at_HP.lissyara.su:/usr/obj/usr/src/sys/HP  amd64
HP#

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Thu Jan 22 19:49:57 MSK 2009
     root_at_HP.lissyara.su:/usr/obj/usr/src/sys/HP
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1994.91-MHz K8-class CPU)
   Origin = "AuthenticAMD"  Id = 0x60f82  Stepping = 2
 
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
   Features2=0x2001<SSE3,CX16>
   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
   AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
   Cores per package: 2
usable memory = 1995911168 (1903 MB)
avail memory  = 1927376896 (1838 MB)
ACPI APIC Table: <HP     0944    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ACPI Error (tbfadt-0516): 32/64X address mismatch in "Pm2ControlBlock": 
[    8800] [       0    8100], using 64X [20070320]
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi0: reservation of 0, 8000000 (3) failed
acpi0: reservation of 100000, fff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 
0xc0000000-0xc7ffffff,0xd0200000-0xd020ffff,0xd0300000-0xd03fffff irq 19 
at device 5.0 on pci1
acpi_video0: <ACPI video extension> on vgapci0
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci16: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xd0000000-0xd000ffff 
irq 16 at device 0.0 on pci16
miibus0: <MII bus> on bge0
brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bge0: Ethernet address: 00:1f:29:89:38:f3
bge0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci32: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci48: <ACPI PCI bus> on pcib4
bwi0: <Broadcom BCM4312 802.11 Wireless Lan> mem 0xc8000000-0xc8003fff 
irq 18 at device 0.0 on pci48
bwi0: [ITHREAD]
bwi0: regwin: type 0x800, rev 19, vendor 0x4243
bwi0: BBP: id 0x4311, rev 0x2, pkg 0
bwi0: nregwin 4, cap 0x0864000d
bwi0: regwin: type 0x812, rev 13, vendor 0x4243
bwi0: MAC: rev 13
bwi0: regwin: type 0x817, rev 4, vendor 0x4243
bwi0: regwin: type 0x820, rev 5, vendor 0x4243
bwi0: clksrc CS_OSC
bwi0: clkfreq min 990000, max 1010000
bwi0: power on delay 3
bwi0: bus rev 6
bwi0: PCIE is enabled
bwi0: card flags 0x4a49
bwi0: 0th led, act 2, lowact 0
bwi0: 1th led, act 3, lowact 1
bwi0: 2th led, act 4, lowact 0
bwi0: 3th led, act 0, lowact 0
bwi0: MAC was already disabled
bwi0: PHY is linked
bwi0: PHY: type 2, rev 9, ver 4
bwi0: PHY: 11G attach
bwi0: RF: manu 0x17f, type 0x2050, rev 2
bwi0: bus rev 6
bwi0: PHY is linked
bwi0: 64bit bus space
bwi0: max txpower from sprom: 74 dBm
bwi0: ant gain 8 dBm
bwi0: region/domain max txpower 76 dBm
bwi0: max txpower 74 dBm
bwi0: sprom idle tssi: 0x783e
bwi0: TSSI-TX power map:
83 83 82 82 82 82 81 81
80 80 79 79 79 78 78 77
77 76 75 75 74 74 73 73
72 72 71 70 69 69 68 67
66 65 64 64 62 61 60 59
58 57 55 54 52 51 49 48
46 45 42 41 38 36 33 31
28 25 22 19 15 11 6 2
bwi0: idle tssi0: 62
bwi0: bus rev 6
bwi0: locale: 0
bwi0: WARNING: using obsoleted if_watchdog interface
atapci0: <ATI IXP600 SATA300 controller> port 
0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f 
mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: port not implemented
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: port not implemented
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: port not implemented
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xd0401000-0xd0401fff irq 23 
at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xd0402000-0xd0402fff irq 17 
at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xd0403000-0xd0403fff irq 17 
at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xd0404000-0xd0404fff irq 17 
at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xd0405000-0xd0405fff irq 17 
at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0406000-0xd04060ff irq 
23 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x5040-0x504f irq 16 at device 20.1 
on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
hdac0: <ATI SB600 High Definition Audio Controller> irq 16 at device 
20.2 on pci0
hdac0: HDA Driver Revision: 20090113_0125
hdac0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib5
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd0100000-0xd0100fff irq 20 at 
device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
powernow1: <PowerNow! K8> on cpu1
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ugen0: <Broadcom Corp HP Integrated Module, class 224/1, rev 2.00/1.00, 
addr 2> on uhub0
ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 2> on 
uhub1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
cpufreq0: rejecting change, SMP not started yet
acpi_tz0: failed to set new freq, disabling passive cooling
acd0: DVDR <HL-DT-ST DVDRAM GSA-T20L/NC08> at ata0-master PIO4
ad4: 152627MB <TOSHIBA MK1646GSX LB114C> at ata2-master SATA300
hdac0: HDA Codec #0: Analog Devices AD1981HD
hdac0: HDA Codec #1: Lucent/Agere Systems (Unknown)
pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> at cad 0 nid 1 on hdac0
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 
0x01
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): NOT READY csi:0,0,bb,0 asc:3a,0
(probe0:ata0:0:0:0): Medium not present
(probe0:ata0:0:0:0): Unretryable error
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 
0x01
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): NOT READY csi:0,0,bb,0 asc:3a,0
(probe0:ata0:0:0:0): Medium not present
(probe0:ata0:0:0:0): Unretryable error
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-T20L NC08> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
lock order reversal:
  1st 0xffffff0002322070 user map (user map) _at_ /usr/src/sys/vm/vm_map.c:3198
  2nd 0xffffff00029107f8 ufs (ufs) _at_ /usr/src/sys/kern/vfs_subr.c:2079
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
__lockmgr_args() at __lockmgr_args+0xca8
ffs_lock() at ffs_lock+0x8c
VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b
_vn_lock() at _vn_lock+0x47
vget() at vget+0x8b
vnode_pager_lock() at vnode_pager_lock+0x1d0
vm_fault() at vm_fault+0x1e2
trap_pfault() at trap_pfault+0x128
trap() at trap+0x51c
calltrap() at calltrap+0x8
--- trap 0xc, rip = 0x40014f, rsp = 0x7fffffffee70, rbp = 0x7fffffffee90 ---
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
lock order reversal:
  1st 0xfffffffe66c80bf8 bufwait (bufwait) _at_ 
/usr/src/sys/kern/vfs_bio.c:2443
  2nd 0xffffff0002975400 dirhash (dirhash) _at_ 
/usr/src/sys/ufs/ufs/ufs_dirhash.c:275
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
_sx_xlock() at _sx_xlock+0x55
ufsdirhash_acquire() at ufsdirhash_acquire+0x33
ufsdirhash_add() at ufsdirhash_add+0x19
ufs_direnter() at ufs_direnter+0x88b
ufs_makeinode() at ufs_makeinode+0x338
VOP_CREATE_APV() at VOP_CREATE_APV+0x8d
vn_open_cred() at vn_open_cred+0x479
kern_openat() at kern_openat+0x169
syscall() at syscall+0x1bf
Xfast_syscall() at Xfast_syscall+0xab
--- syscall (5, FreeBSD ELF64, open), rip = 0x80155bd1c, rsp = 
0x7fffffffddf8, rbp = 0x11 ---
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
wlan0: Ethernet address: 00:00:00:21:00:0a
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based 
forwarding disabled, default to deny, logging disabled
lock order reversal:
  1st 0xffffff0005603d80 ufs (ufs) _at_ /usr/src/sys/kern/vfs_mount.c:1047
  2nd 0xffffff0002e9d620 devfs (devfs) _at_ /usr/src/sys/kern/vfs_subr.c:2079
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
__lockmgr_args() at __lockmgr_args+0xc2a
vop_stdlock() at vop_stdlock+0x39
VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b
_vn_lock() at _vn_lock+0x47
vget() at vget+0x8b
devfs_allocv() at devfs_allocv+0x10c
devfs_root() at devfs_root+0x52
vfs_donmount() at vfs_donmount+0x1106
nmount() at nmount+0xa6
syscall() at syscall+0x1bf
Xfast_syscall() at Xfast_syscall+0xab
--- syscall (378, FreeBSD ELF64, nmount), rip = 0x8007a5cdc, rsp = 
0x7fffffffdda8, rbp = 0x800a04048 ---
WARNING: attempt to net_add_domain(bluetooth) after domainfinalize()
lock order reversal:
  1st 0xffffff0002df8650 user map (user map) _at_ /usr/src/sys/vm/vm_map.c:3198
  2nd 0xffffff00051c29d0 tmpfs (tmpfs) _at_ /usr/src/sys/kern/vfs_subr.c:2079
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
__lockmgr_args() at __lockmgr_args+0xc2a
vop_stdlock() at vop_stdlock+0x39
VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b
_vn_lock() at _vn_lock+0x47
vget() at vget+0x8b
vnode_pager_lock() at vnode_pager_lock+0x1d0
vm_fault() at vm_fault+0x1e2
trap_pfault() at trap_pfault+0x128
trap() at trap+0x51c
calltrap() at calltrap+0x8
--- trap 0xc, rip = 0x401705, rsp = 0x7fffffffeb80, rbp = 0x80106c000 ---
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
drm0: <ATI Radeon RS690 X1270 IGP> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.29.0 20080613
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS690/RS740 Microcode
info: [drm] Num pipes: 1
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]
lock order reversal:
  1st 0xffffff000508d848 filedesc structure (filedesc structure) _at_ 
/usr/src/sys/kern/kern_descrip.c:1076
  2nd 0xffffff00058ea098 ufs (ufs) _at_ /usr/src/sys/kern/vfs_subr.c:4065
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
__lockmgr_args() at __lockmgr_args+0xc2a
ffs_lock() at ffs_lock+0x8c
VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b
_vn_lock() at _vn_lock+0x47
knlist_remove_kq() at knlist_remove_kq+0x73
knote_fdclose() at knote_fdclose+0x177
kern_close() at kern_close+0xe6
syscall() at syscall+0x1bf
Xfast_syscall() at Xfast_syscall+0xab
--- syscall (6, FreeBSD ELF64, close), rip = 0x80108bc2c, rsp = 
0x7fffffffe6c8, rbp = 0x802563840 ---