In article <4A50C331.3040505_at_FreeBSD.org> you write: >Lucius Windschuh wrote: >> Hi Alexander. >> >> 2009/7/5 Alexander Motin <mav_at_freebsd.org>: >>> It's never late. I have just uploaded fresh patch: >>> http://people.freebsd.org/~mav/cam-ata.20090704.patch >> >> "make buildworld" with this patch stops in my configuration with: >> >> /usr/obj/usr/src/tmp/usr/lib/libcam.a(ata_all.o)(.text+0x263): In >> function `ata_max_mode': >> : undefined reference to `min' >> >> Simply adding >> #ifndef min >> #define min(a,b) (((a)<(b))?(a):(b)) >> #endif >> in ata_all.c helps, obviously. > >Thanks. I tried this on the box with that optical drive that head no longer likes (fails to be probed and generates an irq storm, see http://docs.freebsd.org/cgi/mid.cgi?20090628101656.GA38983 ), and with ahci.ko loaded by loader.conf I got timeouts followed by a panic: http://people.freebsd.org/~nox/cam-ata.20090704-panic1.jpg http://people.freebsd.org/~nox/cam-ata.20090704-panic2.jpg The panic seems to be in cam_periph_lock: (kgdb) l *(cdioctl+0x4e) 0xffffffff801a937e is in cdioctl (cam_periph.h:183). 178 u_int32_t sense_flags, union ccb *save_ccb); 179 180 static __inline void 181 cam_periph_lock(struct cam_periph *periph) 182 { 183 mtx_lock(periph->sim->mtx); 184 } 185 186 static __inline void 187 cam_periph_unlock(struct cam_periph *periph) (kgdb) Without ahci.ko loaded it boots, but the original problems remain, here is the dmesg from that boot: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Mon Jul 6 21:22:05 CEST 2009 nox_at_triton.kn-bremen.de:/usr/obj/usr/home/nox/src8camata/src/sys/TRITON8 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81025000. module_register: module probe already exists! Module probe failed to register: 17 Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2812820279 Hz CPU: AMD Phenom(tm) II X4 920 Processor (2812.82-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x100f42 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> TSC: P-state invariant L1 2MB data TLB: 48 entries, fully associative L1 2MB instruction TLB: 16 entries, fully associative L1 4KB data TLB: 48 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB data TLB: 128 entries, 2-way associative L2 2MB instruction TLB: 0 entries, 2-way associative L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 9395240960 (8960 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x000000000104f000 - 0x00000000cfddffff, 3470331904 bytes (847249 pages) 0x0000000100000000 - 0x0000000220a2ffff, 4842520576 bytes (1182256 pages) avail memory = 8270852096 (7887 MB) ACPI APIC Table: <GBT GBTUACPI> INTR: Adding local APIC 1 as a target INTR: Adding local APIC 2 as a target INTR: Adding local APIC 3 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 APIC: CPU 2 has ACPI ID 2 APIC: CPU 3 has ACPI ID 3 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ACPI: RSDP 0xf6fe0 00014 (v0 GBT ) ACPI: RSDT 0xcfde3000 0003C (v1 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 0xcfde3040 00074 (v1 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 0xcfde30c0 05E2B (v1 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 0xcfde0000 00040 ACPI: SSDT 0xcfde8fc0 0088C (v1 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 0xcfde9880 00038 (v1 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 0xcfde98c0 0003C (v1 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: TAMG 0xcfde9900 00302 (v1 GBT GBT B0 5455312E BG\^A\^A 53450101) ACPI: APIC 0xcfde8f00 00084 (v1 GBT GBTUACPI 42302E31 GBTU 01010101) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high lapic2: Routing NMI -> LINT1 lapic2: LINT1 trigger: edge lapic2: LINT1 polarity: high lapic3: Routing NMI -> LINT1 lapic3: LINT1 trigger: edge lapic3: LINT1 polarity: high ioapic0 <Version 2.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> null: <null device, zero device> io: <I/O> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Jul 6 2009 21:21:34) acpi0: <GBT GBTUACPI> on motherboard PCIe: Memory Mapped configuration base _at_ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff8000012000 pa 0x4000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.BAR1 -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.HETT -> bus 0 dev 20 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cfce0000 (3) failed ACPI timer: 1/2 1/2 1/1 1/2 1/1 1/1 1/1 1/2 1/2 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1002, dev=0x5957, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[1c]: type Memory, range 64, base 0xe0000000, size 29, enabled found-> vendor=0x1002, dev=0x5978, revid=0x00 domain=0, bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x597d, revid=0x00 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 19 found-> vendor=0x1002, dev=0x597f, revid=0x00 domain=0, bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.10.INTA pcib0: slot 10 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x4391, revid=0x00 domain=0, bus=0, slot=17, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xff00, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe00, size 2, enabled map[18]: type I/O Port, range 32, base 0xfd00, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfc00, size 2, enabled map[20]: type I/O Port, range 32, base 0xfb00, size 4, enabled map[24]: type Memory, range 32, base 0xfe02f000, size 10, enabled pcib0: matched entry for 0.17.INTA pcib0: slot 17 INTA hardwired to IRQ 22 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=18, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 map[10]: type Memory, range 32, base 0xfe02e000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4398, revid=0x00 domain=0, bus=0, slot=18, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 map[10]: type Memory, range 32, base 0xfe02d000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=18, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x02b0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02c000, size 8, enabled pcib0: matched entry for 0.18.INTB pcib0: slot 18 INTB hardwired to IRQ 17 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x4398, revid=0x00 domain=0, bus=0, slot=19, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[10]: type Memory, range 32, base 0xfe02a000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=19, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x02b0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe029000, size 8, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4385, revid=0x3a domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x439c, revid=0x00 domain=0, bus=0, slot=20, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 MSI supports 1 message map[20]: type I/O Port, range 32, base 0xfa00, size 4, enabled found-> vendor=0x1002, dev=0x4383, revid=0x00 domain=0, bus=0, slot=20, func=2 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0410, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xfe024000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=0x1002, dev=0x439d, revid=0x00 domain=0, bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4384, revid=0x00 domain=0, bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4399, revid=0x00 domain=0, bus=0, slot=20, func=5 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x02a0, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[10]: type Memory, range 32, base 0xfe028000, size 12, enabled pcib0: matched entry for 0.20.INTC pcib0: slot 20 INTC hardwired to IRQ 18 found-> vendor=0x1022, dev=0x1200, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1201, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1202, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1203, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1204, revid=0x00 domain=0, bus=0, slot=24, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfde00000-0xfdefffff pcib1: prefetched decode 0xd0000000-0xdfffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x9498, revid=0x00 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[18]: type Memory, range 64, base 0xfdee0000, size 16, enabled pcib1: requested memory range 0xfdee0000-0xfdeeffff: good map[20]: type I/O Port, range 32, base 0xee00, size 8, enabled pcib1: requested I/O range 0xee00-0xeeff: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0xaa38, revid=0x00 domain=0, bus=1, slot=0, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfdefc000, size 14, enabled pcib1: requested memory range 0xfdefc000-0xfdefffff: good pcib1: matched entry for 1.0.INTB pcib1: slot 0 INTB hardwired to IRQ 19 vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem 0xd0000000-0xdfffffff,0xfdee0000-0xfdeeffff irq 18 at device 0.0 on pci1 pci1: <multimedia, HDA> at device 0.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xfdd00000-0xfddfffff pcib2: prefetched decode 0xfdc00000-0xfdcfffff pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x8086, dev=0x10b9, revid=0x06 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfdde0000, size 17, enabled pcib2: requested memory range 0xfdde0000-0xfddfffff: good map[14]: type Memory, range 32, base 0xfddc0000, size 17, enabled pcib2: requested memory range 0xfddc0000-0xfdddffff: good map[18]: type I/O Port, range 32, base 0xdf00, size 5, enabled pcib2: requested I/O range 0xdf00-0xdf1f: in range pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 19 em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xdf00-0xdf1f mem 0xfdde0000-0xfddfffff,0xfddc0000-0xfdddffff irq 19 at device 0.0 on pci2 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfdde0000 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 em0: using IRQ 256 for MSI em0: Using MSI interrupt em0: [FILTER] em0: bpf attached em0: Ethernet address: 00:1b:21:34:ef:46 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xc000-0xcfff pcib3: memory decode 0xfda00000-0xfdafffff pcib3: prefetched decode 0xfdf00000-0xfdffffff pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x10ec, dev=0x8168, revid=0x02 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0xce00, size 8, enabled pcib3: requested I/O range 0xce00-0xceff: in range map[18]: type Prefetchable Memory, range 64, base 0xfdfff000, size 12, enabled pcib3: requested memory range 0xfdfff000-0xfdffffff: good map[20]: type Prefetchable Memory, range 64, base 0xfdfe0000, size 16, enabled pcib3: requested memory range 0xfdfe0000-0xfdfeffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 18 re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xce00-0xceff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 18 at device 0.0 on pci3 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfdfff000 re0: MSI count : 2 re0: attempting to allocate 1 MSI vectors (2 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 50 re0: using IRQ 257 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:1f:d0:d7:4c:1b re0: [MPSAFE] re0: [FILTER] atapci0: <ATI IXP700/800 SATA300 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00 atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe02f000 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI v1.10 controller with 6 3Gbps ports, PM supported atapci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC 6ports ata2: <ATA channel 0> on atapci0 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect time=0ms status=00000123 ata2: ready wait time=23ms ata2: software reset port 15... ata2: ahci_issue_cmd timeout: 3000 of 3000ms, status=00000001 ata2: port is not ready (timeout 0ms) tfd = 000001d0 ata2: software reset clear timeout ata2: software reset port 0... ata2: ready wait time=0ms ata2: SIGNATURE: 00000101 ata2: AHCI reset done: devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect time=10ms status=00000113 ata3: ready wait time=183ms ata3: software reset port 15... ata3: ahci_issue_cmd timeout: 3000 of 3000ms, status=00000001 ata3: port is not ready (timeout 0ms) tfd = 00000180 ata3: software reset clear timeout ata3: software reset port 0... ata3: ready wait time=0ms ata3: SIGNATURE: eb140101 ata3: AHCI reset done: devices=00010000 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect time=0ms status=00000123 ata4: ready wait time=16ms ata4: software reset port 15... ata4: ahci_issue_cmd timeout: 3000 of 3000ms, status=00000001 ata4: port is not ready (timeout 0ms) tfd = 000001d0 ata4: software reset clear timeout ata4: software reset port 0... ata4: ready wait time=0ms ata4: SIGNATURE: 00000101 ata4: AHCI reset done: devices=00000001 ata4: [MPSAFE] ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: [MPSAFE] ata5: [ITHREAD] ata6: <ATA channel 4> on atapci0 ata6: AHCI reset... ata6: hardware reset ... ata6: SATA connect timeout status=00000000 ata6: AHCI reset done: phy reset found no device ata6: [MPSAFE] ata6: [ITHREAD] ata7: <ATA channel 5> on atapci0 ata7: AHCI reset... ata7: hardware reset ... ata7: SATA connect timeout status=00000000 ata7: AHCI reset done: phy reset found no device ata7: [MPSAFE] ata7: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02e000 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02d000 ohci1: [MPSAFE] ohci1: [ITHREAD] usbus1: <OHCI (generic) USB controller> on ohci1 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02c000 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 53 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <EHCI (generic) USB 2.0 controller> on ehci0 ohci2: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54 ohci2: [MPSAFE] ohci2: [ITHREAD] usbus3: <OHCI (generic) USB controller> on ohci2 ohci3: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0 ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000 ohci3: [MPSAFE] ohci3: [ITHREAD] usbus4: <OHCI (generic) USB controller> on ohci3 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0 ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe029000 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 55 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus5: EHCI version 1.0 usbus5: <EHCI (generic) USB 2.0 controller> on ehci1 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfa00 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=7f ostat1=7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: reset tp2 stat0=ff stat1=ff devices=0x0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57 ata1: [MPSAFE] ata1: [ITHREAD] pci0: <multimedia, HDA> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xb000-0xbfff pcib4: memory decode 0xf8000000-0xfcffffff pcib4: prefetched decode 0xfdb00000-0xfdbfffff pcib4: Subtractively decoded bridge. pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x14f1, dev=0x8800, revid=0x05 domain=0, bus=4, slot=6, func=0 class=04-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0290, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x37 (13750 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf9000000, size 24, enabled pcib4: requested memory range 0xf9000000-0xf9ffffff: good pcib4: matched entry for 4.6.INTA pcib4: slot 6 INTA hardwired to IRQ 20 found-> vendor=0x14f1, dev=0x8811, revid=0x05 domain=0, bus=4, slot=6, func=1 class=04-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0290, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8000000, size 24, enabled pcib4: requested memory range 0xf8000000-0xf8ffffff: good pcib4: matched entry for 4.6.INTA pcib4: slot 6 INTA hardwired to IRQ 20 found-> vendor=0x14f1, dev=0x8802, revid=0x05 domain=0, bus=4, slot=6, func=2 class=04-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0290, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x58 (22000 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfb000000, size 24, enabled pcib4: requested memory range 0xfb000000-0xfbffffff: good pcib4: matched entry for 4.6.INTA pcib4: slot 6 INTA hardwired to IRQ 20 found-> vendor=0x14f1, dev=0x8804, revid=0x05 domain=0, bus=4, slot=6, func=4 class=04-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0290, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0xff (63750 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled pcib4: requested memory range 0xfa000000-0xfaffffff: good pcib4: matched entry for 4.6.INTA pcib4: slot 6 INTA hardwired to IRQ 20 found-> vendor=0x104c, dev=0x8024, revid=0x00 domain=0, bus=4, slot=14, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=1 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfcfff000, size 11, enabled pcib4: requested memory range 0xfcfff000-0xfcfff7ff: good map[14]: type Memory, range 32, base 0xfcff8000, size 14, enabled pcib4: requested memory range 0xfcff8000-0xfcffbfff: good pcib4: matched entry for 4.14.INTA pcib4: slot 14 INTA hardwired to IRQ 22 pci4: <multimedia, video> at device 6.0 (no driver attached) pci4: <multimedia> at device 6.1 (no driver attached) pci4: <multimedia> at device 6.2 (no driver attached) pci4: <multimedia> at device 6.4 (no driver attached) fwohci0: <Texas Instruments TSB43AB23> mem 0xfcfff000-0xfcfff7ff,0xfcff8000-0xfcffbfff irq 22 at device 14.0 on pci4 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfcfff000 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:ef:de:f8:00:00:1f:d0 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xcfdd8000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:ef:de:00:1f:d0 fwe0: bpf attached fwe0: Ethernet address: 02:ef:de:00:1f:d0 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:ef:de:f8:00:00:1f:d0 _at_ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode ohci4: <OHCI (generic) USB controller> mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0 ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe028000 ohci4: [MPSAFE] ohci4: [ITHREAD] usbus6: <OHCI (generic) USB controller> on ohci4 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 58 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 59 uart0: [FILTER] uart0: fast interrupt psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 60 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 61 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode hwpstate0: <Cool`n'Quiet 2.0> on cpu0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 uart2: not probed (disabled) uart3: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 513579 -> 100000 procfs registered lapic: Divisor 2, Frequency 100457873 hz Timecounter "TSC" frequency 2812820279 Hz quality -100 Timecounters tick every 1.000 msec pfsync0: bpf attached lo0: bpf attached pflog0: bpf attached ata5: CONNECT requested firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 hptrr: no controller detected. ata0: Identifying devices: 00000000 ata0: New devices: 00000000 ata1: Identifying devices: 00000000 ata1: New devices: 00000000 ata2: Identifying devices: 00000001 ata2: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 usbus6: 12Mbps Full Speed USB v1.0 ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ugen0.1: <ATI> at usbus0 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ugen6.1: <ATI> at usbus6 uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 uhub6: 2 ports with 2 removable, self powered uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub3: 3 ports with 3 removable, self powered uhub4: 3 ports with 3 removable, self powered ata5: SATA connect timeout status=00000001 ata5: AHCI reset done: phy reset found no device ataata5: DISCONNECT requested 5: reinit done .. ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000000 ata5: AHCI reset done: phy reset found no device ata5: reinit done .. ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 953868MB <Hitachi HDT721010SLA360 ST6OA31B> at ata2-master SATA300 ad4: 1953523055 sectors [1938018C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ad4: Silicon Image check3 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed GEOM: ad4s2: geometry does not match label (255h,63s != 16h,63s). ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00010000 ata3: New devices: 00010000 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire ata3: device_reset timeout=120us acd0: <PIONEER DVD-RW DVR-216D/1.09> DVDR drive at ata3 as master acd0: read 6890KB/s (6890KB/s) write 5511KB/s (6890KB/s), 2000KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata4: Identifying devices: 00000001 ata4: New devices: 00000001 uhub2: 6 ports with 6 removable, self powered uhub5: 6 ports with 6 removable, self powered ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad8: 953869MB <Hitachi HDT721010SLA360 ST6OA31B> at ata4-master SATA300 ad8: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue ad8: Silicon Image check3 failed ad8: Adaptec check1 failed ad8: LSI (v3) check1 failed ad8: LSI (v2) check1 failed ad8: FreeBSD check1 failed ata5: Identifying devices: 00000000 ata5: New devices: 00000000 ata6: Identifying devices: 00000000 ata6: New devices: 00000000 ata7: Identifying devices: 00000000 ata7: New devices: 00000000 GEOM: new disk ad8 GEOM: ad8: partition 1 does not start on a track boundary. GEOM: ad8: partition 1 does not end on a track boundary. GEOM: ad8s3: geometry does not match label (255h,63s != 16h,63s). ugen1.2: <HP> at usbus1 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ATA PseudoRAID loaded SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 2 vector 48 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 3 vector 48 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 2 vector 49 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 3 vector 49 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 50 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 2 vector 50 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 3 vector 50 msi: Assigning MSI IRQ 257 to local APIC 1 vector 51 WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ufsid/49bca1defbad5bce ct_to_ts([2009-07-06 21:47:17]) = 1246916837.000000000 start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered ata5: CONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=00000001 ata5: AHCI reset done: phy reset found no device ata5: reinit done ..ata5: DISCONNECT requested ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... lock order reversal: 1st 0xffffffff80c0ffe0 pf task mtx (pf task mtx) _at_ /usr/home/nox/src8camata/src/sys/contrib/pf/net/pf_ioctl.c:1394 2nd 0xffffffff80e09240 ifnet (ifnet) _at_ /usr/home/nox/src8camata/src/sys/net/if.c:1887 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a _witness_debugger() at _witness_debugger+0x2e witness_checkorder() at witness_checkorder+0x81e _rw_rlock() at _rw_rlock+0x5f ifunit() at ifunit+0x22 pfioctl() at pfioctl+0x1f6d devfs_ioctl_f() at devfs_ioctl_f+0x76 kern_ioctl() at kern_ioctl+0xc5 ioctl() at ioctl+0xfd syscall() at syscall+0x1af Xfast_syscall() at Xfast_syscall+0xd0 --- syscall (54, FreeBSD ELF64, ioctl), rip = 0x80098798c, rsp = 0x7fffffffb568, rbp = 0x7fffffffb6c0 --- tun0: bpf attached altq: emulate 256000000Hz cpu clock WARNING: attempt to net_add_domain(netgraph) after domainfinalize() ata5: SATA connect timeout status=00000001 ata5: AHCI reset done: phy reset found no device ata5: reinit done ..Received on Mon Jul 06 2009 - 19:20:02 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:51 UTC
