> Are you booting to install or booting an existing installation? If > the latter, boot with verbose logging. > I try to boot from existing installation. here is the verbose logging output (only the last lines): ohci0: <OHCI (generic) USB controller> irq 21 at device 2.0 on pci0 ohci0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000 ioapci0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 49 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: SMM does not respond, resetting usbus0: reset timeout ohci0: USB init failed device_attach: ohci0 attach returned 6 ehci0: <NVIDIA nForce4 USB 2.0 controller> irq 22 at device 2.1 on pci0 ehci0: Lazy allocation of 0x4000 bytes rid 0x10 type 3 at 0x80000000 ehci0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0x80000000 ioapci0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 49 ehci0: [MPSAFE] ehci0: [ITHREAD]Received on Sat Jul 11 2009 - 03:00:53 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:51 UTC