On Wed, Jul 15, 2009 at 9:05 PM, Randy Bush<randy_at_psg.com> wrote: >> # zpool status tank >> pool: tank >> state: ONLINE >> scrub: none requested >> config: >> >> NAME STATE READ WRITE CKSUM >> tank ONLINE 0 0 0 >> mirror ONLINE 0 0 0 >> ad0p2 ONLINE 0 0 0 >> ad8p2 ONLINE 0 0 0 >> >> errors: No known data errors >> # zpool detach tank ad0p2 >> # glabel label disk01 /dev/ad0p2 >> # zpool attach tank ad8p2 label/disk01 > ^ huh? >> # zpool status tank >> pool: tank >> state: ONLINE >> status: One or more devices is currently being resilvered. The pool >> will >> continue to function, possibly in a degraded state. >> action: Wait for the resilver to complete. >> scrub: resilver in progress for 0h6m, 17.06% done, 0h29m to go >> config: >> >> NAME STATE READ WRITE CKSUM >> tank ONLINE 0 0 0 >> mirror ONLINE 0 0 0 >> ad8p2 ONLINE 0 0 0 60.7M resilvered >> label/disk01 ONLINE 0 0 0 10.4G resilvered >> >> errors: No known data errors > > dfw0.psg.com:/root# zpool status > pool: tank > state: ONLINE > scrub: none requested > config: > > NAME STATE READ WRITE CKSUM > tank ONLINE 0 0 0 > mirror ONLINE 0 0 0 > ad4s3 ONLINE 0 0 0 > ad5s3 ONLINE 0 0 0 > mirror ONLINE 0 0 0 > ad6s1 ONLINE 0 0 0 > ad7s1 ONLINE 0 0 0 > > errors: No known data errors > dfw0.psg.com:/root# zpool detach tank ad6s1 > dfw0.psg.com:/root# glabel label disk02 /dev/ad6s1 > dfw0.psg.com:/root# zpool attach tank ad6s1 label/disk02 > cannot attach label/disk02 to ad6s1: no such device in pool > attach to ad7s1. Anyway, I find by using entire disk there's no need to worry about this at all. The addresses are automatically adjusted upon change. (at least in jbod mode) -- O< ascii ribbon campaign - stop html mail - www.asciiribbon.orgReceived on Wed Jul 15 2009 - 12:39:51 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:52 UTC